|
|
|
|
2.00 m 6' 7"
|
|
|
model R 210
dimensions (cm) 210 x 120 x 40
max. load (kg) 250
number of chambers 3
optional equipment oars+ oar joints + 23,00 €
wooden floor + 47,00 €
persons capacity 2
boat weight (kg) 12
|
|
The must of Aqua Design rafts. The top of the bill of Aqua Design series used by professionals worldwide.
The big ones are almost indestructible. All made of high-quality Hypalon®, label Orca® 1100 Dtex for tubes and 1680 Dtex on the floor.
The tubes are reinforced with a wrap-up floor. Abrasion-proof it can weather extreme conditions, and it leaves you full control in all circumstances
|
|
|
Light and manoeuvrable, the Splash river board is made of a polyethylene closed-cell foam of high density
|
|
A complete range with high performances.
Present on the majority of the rivers of Europe the Advantage is fast thanks to the design of its round hull and its inflatable self bailing floor.
Built in Hypalon® Orca® neoprene 1100 dtex for the tubes and 1680 dtex for the floors, without forgetting the inferior part of the tubes doubled up to the rubbing strake , Advantage is the raft you need in all circumstances, even the more extreme ones.
|
|
Searching for an economique and featherligth rafting boat ? This is it .... !
Made of very resistant PVC fabric and ligther then our hypalon boats, the AVANTI rafts are around the most economic of the market. The rafts
AVANTI are manufactured with 4 compartments on the outside tubes, an inflatable floor equiped with footcup and two inflatable thwarts. The
tubes are doubled up to the rubbingstake for an excellent resistance to abrasion. The boats are delivered with repairkit and notice.
Don’t wait any longer to try them out ... !
|
|
|
|
|
|
|
EGALIS's Rafts are hand crafted and built tough with triple reinforced seams; bottoms are made from heavy duty material; using full Panama method (double strength, stronger than 2000 denier fabric) : self bailing inflatable zipper type floors; pressure relief valves; glued thwarts; protective full length side strakes ; low profile inflation valves; heavy duty D rings to secure frames and heavy loads; extra large chafe strips protect top and bottom of the tubes; high bow/stern kick for outstanding performance and plenty of interior room. In EGALIS'S rafts we have incorporated a newly developped floor system. This innovative system is a heat-welded inflatable floor made with polyurethane coated nylon inserted to the raft floor through the zipper opening. This estra protection will increase a durability to withstand damage to the floor during extended use. All the rafts proposed by Egalis are supplied with double wrapped bottoms. All the boats are deliverd in a carriage bag including an air pump and a repair kit.
|
|
| ... products without information |
| |
|
|
3.96 m 13' 0"
|
|
|
|
|
|
4.35 m 14' 3"
|
|
|
|
|
|