|
|
The APD System is specifically designed to improve processing and simplify application of high viscosity polyester putties.
The APD uses a 23:1 ratio RAM pumping unit to proportion materials in excess of 1,000,000 centipoise. The pump is equipped with an air motor control valve to prevent static build-up of line pressure. This will prevent the bursting of glass spheres. Normal operating pressure ranges from 200 to 300 PSI. |
|
The Polaris System is The First 2-Component System Developed With The Operator and the Maintenance Supervisor in Mind!
Simple and Maintenance-Free, The Polaris System is Available in Four Different Pump Ratios for Spray and Pour Applications. You can choose from 8:1, 13:1, 22:1 and 40:1 Systems.
These systems are built TOUGH and feature DUAL 1.0 GPM or 2.0 GPM Stainless Steel Fluid Pumps with TRIPLE UPPER SEALS to Prevent Moisture Attack. In addition, Quick Pin Disassembly Provides for Rapid Pump Rebuild or Replacement.
The Polaris Processes Coatings, Adhesives, Polyurethane Foams, Polyurethane Elastomers, and Polyureas.
With the additon of optional line heaters, a hose heater and our Programmable Dispense Meter, This system becomes the Ultimate in 2-Component Dispense Technology |
|
The Putty Chop Check is ideal for syntactic style putties and delivers superior pre-loading of high viscosity materials. Designed to save you money, you can cut production time, material waste and reduce labor with this rugged unit. The Putty Chop Check has been proven to increase production for large operations by reducing the amount of labor required to produce large parts by 1/3, and can cut production time in half. How? The Putty Chop Check provides only the amount of putty you need, reducing material waste normally encountered with hand mixing.
No more triggering into the bucket waiting for proper catalyzation as is necessary with other machines. Maintenance is a breeze and its operating simplicity make it the operator's choice for precise delivery of spray patterns and/or putty beads. The Putty Chop Check spray unit includes an operator-friendly gun designed for rapid application of low- to medium viscosity putties. Consistent metering and mixing can now be achieved at the gun. The Putty Chop Check unit now features hardened nitrotech rods and a hardened cylinder. |
|
The Guardian A-Series is a high performance dispensing system for polyurethane foam, adhesives, and elastomeric coatings. Its compact, portable design fits through standard doorways and is easy to maneuver on the jobsite.
All of the components on the Guardian A-Series (fluid sections, primary heaters, hose heat, hoses, solid state electronics package) are identical to those on the robust TIER #1 M-Series line of hydraulic equipment. |
|
Glues, adhesives, and coatings often need to be sprayed up in uniform and regular layers. Their viscosity is one of the factors that make the process difficult.
Matrasur Composites has designed a series of solutions to face the difficult task of applying such products by excellent conditions. Our equipment is available in different configurations, for manual, on-mould or in situ applications but also in its automatic and robotised versions. |
|
MVP's new UltraBond units are the ultimate solution for your methacrylate adhesive material processing needs. Now you can count on simple, accurate metering and mixing (no gear pumps) with these rugged, easy-to-maintain units.
You get double-acting piston pumps for smooth, continuous power, stainless steel transfer pumps, proportioner pumps, hoses, gun & fluid sections with air/solvent flushing.
Featuring the MVP Powerslide power head, the UltraBond 1:1 Unit delivers a rugged 15:1 power ratio and 25:1 power ratio from the 10:1 unit using the 7" power head; the only true low psi power head on the market. Interchangeable parts for alternate ratios are also available. Operators will benefit from quick response shifting and a pilot valve operated by line pressure for reliability and ease of use. Modular Rapid Access Design (RAD) means fewer parts for easy maintenance and low maintenance costs.
It all happens at the gun: The UltraBond Units come with the superior 1:1 or 10:1 dispensing gun -- the #1 choice of methacrylate adhesive bonding users. The guns incorporate an easy ratio check feature that assures proper mix every time. In addition, these guns also features a "night cap" for protection against accidental crossover. |
|
| ... products without information |
| |
|
|
Boatyard : Adhesive machines, Dispensing machines...
