|
|
Codice prodotto: HPSN0002 / HPSN0003 / HPSN0004 / HPSN0005
In 2005 a new line of wastewater tanks was added to the product line of SIC Divisione Elettronica.
Certified in compliance with ISO 8099
- The tanks are made in 55, 77, 160 and 207 l main versions but can be customized %u2013 OEM solutions - to fit the customer%u2019s exact specifications.
- The wastewater tanks are made of extra strong metallocene (mMDPE) polyethylene with superior mechanical properties.
- The tanks are resistant to solvents, acids and other surface-active agents.
- They withstand high pressures. These tanks were tested under the pressure that by far exceeded resistance requirements.
- The tanks come complete with all the necessary accessories and a new capacitive electronic level sender of the highest quality and measurement precision.
- They are light-weight
- They are certified to comply with all the strictest requirements of ISO 8099 Safety Standard
- These tanks undoubtedly offer the best value available.
|
|
|
|
|
|
|
|
TRIONIC offers an extensive line of Marine and RV water and holding tanks to meet most size and durability requirements. All tanks are rotationally molded of a seamless one piece, non-corrosive linear polyethylene that meets FDA acceptance and complies with Coast Guard regulations. Each water tank has one 1/2" supply opening, one 1-1/2" fill opening and one 1/2" vent. Each holding tank has one 1/2" vent and has two 1-1/2" openings. Openings on all tanks are female National Pipe Threads (NPT) and are located on one end of the tank. We offer custom fitting locations and an optional 3" cleanout or inspection port. All of our tanks are guaranteed to be extremely durable and will not collapse when emptied with high capacity pumps. All tanks can be special ordered with 3/8" wall thickness. If you do not see the tank dimensions that you need on our website, please call to see if we have a tank to suit your needs. We have many sizes that are not listed here. Custom fitting locations are available upon request.
|
|
|
Automatic Marine SuperSump® Shower Sump Tank - Trionic's 2-gallon, 4-gallon (shown) 10-gallon and 14-gallon large capacity automatic shower sump eliminates the overflow problems of small capacity units
|
|
|
|
|
|
|
Dometic marine holding tank system – a clean and easy solution to fit every boat
Tried and tested in thousands of installations, Dometic holding tanks provide a clean and safe service for many years. Top-mounted hose connections and an extra-thick wall of durable polyethylene give a leak-proof and odourfree design. Handy for do-it-yourself enthusiasts: all holes are pre-cut, all fittings are pre-installed and tested in the factory. Two separate discharge outlets eliminate the need for extra plumbing connections. Add to this a comprehensive range of well-planned accessories, and you’ll get an all-in-one, no-worry solution. Dometic holding tanks are available in five sizes to fit all common types of boats.
Holding tank
› Leak-proof, odour-free design in highly durable polyethylene
› Pre-installed and tested fittings that can rotate
› Separate outlets for dockside and overboard discharge
› Discharge tubes in special non-clogging design
› Level indicator, discharge controls are easily retrofitted
› Vacuum relief valve prevents damage from high-capacity dockside vacuum pumps
› Compliant with ISO 8099 requirements
› 5 year warranty
› Choice of 5 models ranging from 42 to 137 litres
|
|
|
The particular specification of polyethylene (food grade quality) which TEK-TANKS use will not corrode and provides clean, taste free water for the galley.
|
|
|
These tanks are plain tanks with no fittings. Tek-Tanks can however, "fit up" these tanks to your requirements. You tell us what fitting and where you want it.
|
|
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970497
|
|
Continuously monitors 3 levels of holding and water tanks and monitors battery level. Includes rocker switch for pump if needed. Suitable for tanks up to 26" tall. Optional grey water tank sensor available.
- Easy to Install
The Smart Sense System is attached to the outside of the tank as shown.
- Reliable
No micro float switches or probes to degrade and fail. Electronic sensors are outside the tank
- Attractive and User Friendly
Smart Sense System includes a display panel with LED lights and hidden mounting screws inside snap out mounting bezel.
|
|
| ... products without information |
| |
|
|
|
|
|
|
TRIONIC offers an extensive line of Marine and RV water and holding tanks to meet most size and durability requirements. All tanks are rotationally molded of a seamless one piece, non-corrosive linear polyethylene that meets FDA acceptance and complies with Coast Guard regulations. Each water tank has one 1/2" supply opening, one 1-1/2" fill opening and one 1/2" vent. Each holding tank has one 1/2" vent and has two 1-1/2" openings. Openings on all tanks are female National Pipe Threads (NPT) and are located on one end of the tank. We offer custom fitting locations and an optional 3" cleanout or inspection port. All of our tanks are guaranteed to be extremely durable and will not collapse when emptied with high capacity pumps. All tanks can be special ordered with 3/8" wall thickness. If you do not see the tank dimensions that you need on our website, please call to see if we have a tank to suit your needs. We have many sizes that are not listed here. Custom fitting locations are available upon request.
|
|
|
Automatic Marine SuperSump® Shower Sump Tank - Trionic's 2-gallon, 4-gallon (shown) 10-gallon and 14-gallon large capacity automatic shower sump eliminates the overflow problems of small capacity units
|
|
|
|
|
|
|
Dometic marine holding tank system – a clean and easy solution to fit every boat
Tried and tested in thousands of installations, Dometic holding tanks provide a clean and safe service for many years. Top-mounted hose connections and an extra-thick wall of durable polyethylene give a leak-proof and odourfree design. Handy for do-it-yourself enthusiasts: all holes are pre-cut, all fittings are pre-installed and tested in the factory. Two separate discharge outlets eliminate the need for extra plumbing connections. Add to this a comprehensive range of well-planned accessories, and you’ll get an all-in-one, no-worry solution. Dometic holding tanks are available in five sizes to fit all common types of boats.
Holding tank
› Leak-proof, odour-free design in highly durable polyethylene
› Pre-installed and tested fittings that can rotate
› Separate outlets for dockside and overboard discharge
› Discharge tubes in special non-clogging design
› Level indicator, discharge controls are easily retrofitted
› Vacuum relief valve prevents damage from high-capacity dockside vacuum pumps
› Compliant with ISO 8099 requirements
› 5 year warranty
› Choice of 5 models ranging from 42 to 137 litres
|
|
|
The particular specification of polyethylene (food grade quality) which TEK-TANKS use will not corrode and provides clean, taste free water for the galley.
|
|
|
These tanks are plain tanks with no fittings. Tek-Tanks can however, "fit up" these tanks to your requirements. You tell us what fitting and where you want it.
|
|
| ... products without information |
| |
|
|
|
|
|
Installed and ready to use in 30 minutes!
Gobius is the first level indicator in the world that measures from the outside. Installing Gobius to your tank is very easy. Instead of the traditional way of installation, i.e taking the tank apart and drilling holes, you simply attach the sensors to the tank on the outside.
All Gobius products measure from the outside
Very easy to install and setup
Suitable for all tank materials; stainless steel/steel, aluminum, plastic and fibre glass
Gobius can be retro-fitted to any shape or size of a tank
Analouge output for gauges from Wema, VDO, Faria, Teleflex, Phillipi…
Supports NMEA 2000
Extremely low electricity consumption, less than 40 mA (12 Volts)
Support 12 – 24 Volts
30 minutes to install
On the sensor there is a disc of tape that is provided to attach the sensor directly onto the surface of your tank. The panel may be placed in the washroom. All necessary cables and plugs needed to connect the sensors and the panel with the control unit are included.
Very easy to calibrate
No tanks look the same. There are always differences in e.g. size, construction, thickness and age. In order to compensate for these differences you have to calibrate the tank before you start to use your Gobius. However, the calibration only takes a few seconds.
The Gobius technology (patented)
Each sensor that is placed onto the tank wall consists of a shaker and an accelerator. When the shaker creates a vibration in the tank wall, the accelerator measures the size of the vibration and passes the data on to the control unit.
Art No 970497
|
|
Continuously monitors 3 levels of holding and water tanks and monitors battery level. Includes rocker switch for pump if needed. Suitable for tanks up to 26" tall. Optional grey water tank sensor available.
- Easy to Install
The Smart Sense System is attached to the outside of the tank as shown.
- Reliable
No micro float switches or probes to degrade and fail. Electronic sensors are outside the tank
- Attractive and User Friendly
Smart Sense System includes a display panel with LED lights and hidden mounting screws inside snap out mounting bezel.
|
|
|
|
