Products > Rigging, Marine hardware > genoa furler

Genoa furlers

127 Products (boat or nautical equipment) | 38 Companies

Aluminum sailboat jib furler MR4/6 CDI

The NEW MAINSAIL REEFING SYSTEM now being offered by CDI finally delivers to the sailboat owner a reasonably priced mainsail reefing system that can be owner installed. The new system is based on the time proven design of the CDI Flexible Furler.
The new MAINSAIL REEFING ...

PVC sailboat jib furler FF1 CDI

Flexible Furler vs. Reefer: Flexible Furlers feature a one-piece plastic luff extrusion (vs. the Reefer's aluminum luff sections). CDI has been producing the Flexible Fuler since 1989.

Identifying your Flexible ...

Sailboat jib furler CDI

In designing the Flexible Furler, we focused on the vast majority of sailors who are primarily cruisers or daysailors. They might race but only casually. These sailors have boats under 40 feet ...

Sailboat jib furler Goiot

Our range of headsail furlers combines streamlined shapes and easy mounting. All components are made from ...

Jib furler for sailing dinghy Sea Sure

The Sea Sure jib furler is designed for complete reliability. The
drum is completely enclosed to prevent rope from coming off and
jamming during operation. It also features an all stainless steel
thrust bearing so that it still operates ...

Electric sailboat jib furler (through deck) D31-5-SE Bartels

D31-5-SE below deck, ...

Sailboat jib furler FE SERIES 2 Bartels

Because of an unlimited number of possible rotations of the jib furler you
are also able to furl light wind sails with big foot length (e. g. top genoa or gennaker)
A thick rope with a good grip ...

Sailboat jib furler (through deck) D11-4-S / D11-5-S Bartels

Dl 1 -4-s, Dl 1 ...

4 products

Jib furler for sailing dinghy HT 91347 - BL = 500 kg Holt

Holt Nautos furling systems are built simply and sturdily.
Features include:
Circular ...

Stainless steel sailboat jib furler HT 96134 - BL = 1400 kg Holt

Holt Nautos furling systems are built simply and sturdily.
Features include:
Circular ...

Sailboat jib furler RF76 - B.L - 1700 kg Ronstan

Jib furler for sailing dinghy R2200 - BL = 900 KG RWO

Sailboat jib furler Nautos

The Nautos Furling is built simply and sturdily and is characterized ...

Stainless steel sailboat jib furler Nautos

The Nautos Furling is built simply and sturdily and is characterized by ...

Sailboat jib furler Nemo Industrie

Safety on board is extremely important and when there is a valid help navigation is certainly more relaxed. The reliable "WONDERFURL" is a jib-furler designed by ...

Sailboat jib furler SPEEDY Nemo Industrie

A deck fastening and a halyard are all one need to fit SPEEDY on your boat. lt is the first fast furling system ...

Aluminum sailboat jib furler CF-700 Schaefer

The newest SnapFurl uses the snap over-the-headstay, interlocking ...

Sailboat jib furler CF500 Schaefer

Schaefer's smallest over-the-headstay systems utilize Torlon bearing races, composite torque ...

Sailboat jib furler Hathaways, Reiser & Raymond

Having the right amount of sail for the conditions has been made easier over recent years, a jib furler is now standard equipment on all but pure racing boats. Hathaways relationships with major brands ensure we can always supply and give you the best advice on the latest technologies.
Main furling has had the most ...

Sailboat jib furler HEROT Mastbau & Segelmacherei

Few products have simplified sailing so much as jib roller reefing. It's no surprise that most cruising yachts come
equipped with jib roller reefing.
However, the original system has changed ...

Cruising sail : genoa (furling) Gowen Ocean Sailmakers

- Stainless steel pressed clew rings
- Webbed rings for larger sails
- Webbing ...

Cruising sail : genoa (furling) Hood

Hood's high technology brings performance to our roller reefing/furling genoas.

Almost any genoa can be adapted to roller furling with a ...

Cruising sail : genoa (furling) PASSAGEMAKER UK-Halsey International

Passagemakers are UK-Halsey's line of roller furling genoas. They incorporate all the features that cruising sailors want most -- a foam luff, reefing reinforcements and a rugged UV covers on the leech and foot.

As the name implies, dependability is the Passagemaker's middle name. These genoas are ...

Cruising sail : genoa (furling) Lidgard Sailmakers

A number of todays cruising sailors are looking for more than just reliability in their reef furl genoa.
Performance through superior design, a radial ...

Cruising sail : genoa (cross-cut, furling) Haarstick

Cruising sail : genoa (furling, in Dacron®) Haarstick

Cruising sail : genoa (cross-cut, furling) Scott Sails

Standard Features

Cross Cut cruising genoas ...

Cruising sail : genoa (tri-radial, furling) Scott Sails

Tri Radial Genoa...

Features

Tri Radial ...

Cruising sail : genoa (furling) FX Sails

Take a close look at FX headsails and you'll discover a wide range of standard features that are cost-added options ...

Cruising sail : genoa (furling) Kemp Sails

ROLLER GENOAS: Luff tape to suit headfoil. ...

Cruising sail : genoa (furling) OUTSIDER SAILS

Head-sail cover (furling) ATN

The Genoa Sleeve
About the Sun Shield - the ATN Genoa Sleeve
Protects the furled sail without the sacrificial sun cover.
It ...

<Back 1 2

Breakdown by category

109

Sailboat riggings : Furling gear
3

Sailing dinghies and sport multihulls riggings
14

Cruising sails : Genoas, Jibs
1

Sail accessories
1

Marine upholstery : Covers

Related searches

Furler
Sailboat furler
Jib furler
Hydraulic furler
Headsail furler
Cruising genoa sail
Genoa sail
Control handle
Cruising sail
Sail
Tri-radial sail
Sail cover
Cover

Catalog search

Bartels
bartels

Here the first 5 pages from the catalogue "bartels", returning results for: genoa furler

P. 40
Rope Guidance for Headsail Furling and Headsail Reefing Systems The rope should be braided and it should be as hard as possible. Otherwise the rope could jam itself the outer parts on the drum could squeeze the inner parts. Rope diameter and length have to be in compliance with the individual jib

P. 24
Thread Connector and Safety Turnbuckle Connection below Deck (Systems with Deck Passages) Thread Connector Safety Turnbuckle The Thread Connector (1) allows the link of the Jib Furler with the Deck Passage. Adjustable dimensions: Jib Furler Type I or II up to 10 mm Jib Furler Type III up to 15 mm

P. 7
Details for ordering Mounting advice For headsail furling and reefing systems with tackle a four hole plate is needed. Please indicate this when ordering. The rope leaving the outlet should run vertical to the rotation axis of the jib furler. Don’t guide the rope over the edge of the opening

P. 34
Deck Passage Standard Axis movable in longitudinal direction (not watertight) Advantages • • Economic model Available sizes: Article Part No. UD IV FE I FE II FE III FE IV FI F II F III F IV 16 20 30 35 150 150 150 200 jib furler length (A) L 4 UD III Ø (D) (mm) 3 UD II for jib

P. 11
Advantages • Details for ordering Because of an unlimited number of possible rotations of the jib furler you are also able to furl light wind sails with big foot length (e. g. top genoa or gennaker) • A thick rope with a good grip can be pulled in • The rope outlet is clockwise
Harken
HARKEN CATALOGUE 2011

Here the first 5 pages from the catalogue "HARKEN CATALOGUE 2011", returning results for: genoa furler

P. 145
New Morning, 54' Chuck Paine & Ed Joy Design, Lyman-Morse Boatbuilding ? Billy Black photo Headsail handling Systems New for 2011 Small Boat Underdeck Furling Page 148 MKIV Underdeck Jib Reefing & Furling Unit 0 Page 158-159

P. 168
are suitable for cruising boats from 50 to 120 feet (15-36.6 m) with headstays of up to 1-inch wire (25 mm) or -115 rod (22.2 mm). Worldwide parts and service. MKIII Hydraulic Jib Reefing and Furling Detai ls Make the Diference Torlon® Ball Bearings Large-diameter Torlon® ball bearings in halyard

P. 165
) connector *Line not included MKIII Jib Reefing & Furling MKIII jib reefing and furling systems are designed for large performance racing and cruising boats. Strong, lightweight, and aerodynamic, these systems feature large-diameter drums and friction-free bearings to make furling and reefing smooth

P. 154
Pressure-cast sculpted aluminum line guard is open for easy line access Small Air Swivels® turn freely on computer-designed bearing races to reduce windage and weight aloft Unit 00AL Jib Reefing & Furling Unit 00AL is the perfect jib reefing and furling system for small cruising boats under 26 ft

P. 160
to the design. This dependable system lets you smoothly unfurl your headsail, furl and reef safely in a blow, and control boat speed when maneuvering in a crowded harbor?all from the safety of the cockpit. Cruising Jib Reefing & Furling DO NOT use Harken equipment for human suspension.
Profurl
2011 Profurl catalogue

Here the first 5 pages from the catalogue "2011 Profurl catalogue", returning results for: genoa furler

P. 33
33 MOTORISED FURLERS Hundreds of PROFURL electric and hydraulic genoa reefing systems have been supplied over the last 15 years. These systems are highly performant and have a great reliability; they also offer customers comfort and security. PROFURL offers new motorised headsail furlers for

P. 9
9 MANUAL REFING SYSTEMS PROFURL offers a comprehensive range of manual headsail furlers. With its Cruising and Racing models, PROFURL is able to match the expectations of the sailor whatever the sailing program. Reliability > Performance > Robustness

P. 7
7 Structural system (acts as a forestay for the mast) Sails which can be used with this system Partial furling of the sail Possibility to sail with a sail fully deployed Sailing programs Manual reefing systems No ? Genoa ? Staysail ? Solent jib Yes Yes ? Cruising ? Ocean racing

P. 26
26 Flying sail furlers EC models: flying sail furlers with drum > With a drum and a single furling line similar to manual headsail furler. > Economical system. > Wide choice of attachments (snap shackle, large eye?). EC 4000 Fitting options for EC models Frequently asked questions: flying

P. 13
13 Extrusion: A new joiner system with an enhanced grip of the connector screws. Locking devices: New stream line drum mechanism design. Made from two counter plastic halves, and including retaining screws, to withstand lateral loads. The drum: As per other PROFURL manual headsail
Facnor
FACNOR CATALOGUE 2011

Here the first 5 pages from the catalogue "FACNOR CATALOGUE 2011", returning results for: genoa furler

P. 9
i headsail furling your furling system your navigation program facnor team is very much involved innovation customer needs this as well as the expertise the mosl competent skippers has led to the adoption improvemenl the facnor headsail reefing s stem range eoch range specifie features kas

P. 1
summar y introduction to losange group facnor p 4 6 custom equipment p 7 10 ls lx rx headsail furling reefing systems p 11 15 fd webbing furling reefing systems new p 16 19 rc continuous line furling reefing systems p 20 23 electric furling reefing systems p 24 28 structural staysail genoa furlers

P. 18
continuous b b b b line b b b b furlers b b n the past the continuous line furling b b systems b b used to be b b fitted b b b b gennaker furlers headsail structural furlers hcwever they are now available the rc headsail reefing b b systems b b compared to b b conven b b lional drum the advantoges continuous

P. 28
structural stay furlers furling power performance b facnor b b has b b adapted the open 60 staysail furlers to other ranges fast racing boats these structural furlers support mast b b loads b b can b b entirely b b furl b b b b out b b headsails b b such as soient staysail genoa this b b system b b

P. 14
b webbing furling reefing systems b b safety b b innc b b flatdeck is powerful furling system fitted webbing this grcat facnor innovation offers safe easy headsail furling no reefing line overriding an important torque overall the fd low profile b b dru b b b b m b b you benefit from maximum luff b
Facnor
SD FORMER RANGE

Here the first 5 pages from the catalogue "SD FORMER RANGE", returning results for: genoa furler

P. 9
Installation manual – SD headsail furler – page 8

P. 8
FURLING - REEFING TIPS (next): When unfurling, restrain the reefing line so that it doesn’t jerk out of hand. Keep line under control as you furl and mind that it does not overlap. When you reef, do not forget to move your genoa car to insure the right tension on the genoa leach and foot

P. 10
) Slide the link plates into the notches situated on each side of the drum bottom. The top of the link plates are fixed with the 2 short screws supplied through the threaded holes. Drawing 2 Installation manual – SD headsail furler – page 9

P. 2
the mast. WARNING: MAKE SURE THAT THE MAST IS SECURE BEFORE YOU REMOVE STEM HEAD PIN. Installation manual – SD headsail furler – page 1

P. 6
of drum. Furl few turns around the drum. Installation manual – SD headsail furler – page 5