|
|
A handy, sturdy cocktail table for use on most boat-types. The table
top is produced in rugged silver ABS plastic. Extra stainless steel Twist-Lock deck flange for alternate table placement. No hole in deck required.
|
|
This 4" diameter Shock Absorbing Pedestal provides the ultimate in boating comfort and safety. Manufactured with high grade marine aluminum, the pedestal provides the ultimate in safety, comfort and strength. The shock absorbing suspension allows passengers to remain seated when travelling on rough water, avoiding the need to stand up to feel secure.
Seaspension Pedestals are designed to retrofit into most boats with conventional rigid posts, and feature internal progressively rated springs that self-adjust to the passenger's weight. The Seaspesion Pedestal is available in 16", 19", 22" or 25" heights.
|
|
|
|
|
|
|
UPSCALE QUALITY, PREMIUM MATERIALS: Only the best materials are used in the Commander Seat Hardware System! With oversized anodized aluminum tubing, solid stainless steel slide rails, Delrin bearing rods, and CNC Machined or Precision-Cast Aluminum, the hand built Commander system makes a statement of class aboard any large boat or yacht.
ROCK SOLID, WOBBLE FREE
SWIVEL: 360 degree free rotation or positive lock in 45 degree increments - single lever operation with drag adjustment for optimal performance
SLIDE: 6" of fore and aft travel with positive locking at 1" increments. Solid 1" stainless steel slide rails with lubrication system are operated with a single lever for effortless and smooth precision operation
LIFT: Vertical travel of 4" is operated from a single lever in a lift-to-lift motion. A gas spring and lubrication system provide 112 lbs. of lift force
The Yachtsman II is available in 4 different Gas Rise Adjusting Height Systems.
For adjusting height availability please see options below.
Can be used with the Atlantis Helm Chair
|
|
The newest seat base from Llebroc Industries, the Helmsman Bolt Down Base Stand is available in two models with variable height adjustments.
The LLE-5410 features a 4" mounting post which is adjustable from 18" to 28".
The LLE-5409 also has a 4" post, but adjusts from 23" to 33".
A 12-inch mounting plate bolts directly to the deck ensuring rock solid seat stability in even the roughest seas. This configuration makes it desirable for even the most luxurious boats.
Constructed of 5052-H32 1/4" thick aluminum, the entire unit is sealed against the most severe weather conditions by a black UV protected textured powder coat. The Helmsman fits all existing 4" marine hardware and seat mounts.
|
|
model 6691
manual seat pedestal bases
Pedestal bases for manual seats are in marine grade 316L stainless steal, provide full 360° rotation and include gas-lift height adjustment with manual locking. On automatic seats all cables pass through the pedestal to the controls on the armrests.
|
|
Eletric table pedestal made in high grade anodised marine alloy.
Motor available in 12 or 24 Volts.
Minimum high 350 mm. and maximum 700 mm.
Round base Ø 400 mm.
|
|
ELECTRIC TABLE PEDESTAL
Stainless steel AISI 316L
Available with motor 12 or 24 Volts
Minimum high 340 and max 690
|
|
ELECTRIC TABLE PEDESTAL
Made in stainless steel AISI 316
Available with motor 12 or 24 Volts
Minimum high 340 an max 690 mm.
Inferior base 400 x 400 x 8 mm.
Superior base 400 x 400 x 4 mm.
Raise up to 100 Kg
|
|
Eletric table pedestal made in high grade anodised marine alloy.
Motor available in 12 or 24 Volts.
Minimum high 350 mm. and maximum 700 mm.
Round base diam. 400 mm.
|
|
model 6685
Pedestal bases for tables
Pedestal bases for tables are in marine grade 316L stainless steal, provide full 360° rotation and include gas-lift height adjustment with manual locking.
|
|
|
Table column with 360° swivel and height adjustment. Easy to adjust to exact position for Dinner Table or bed. Recomended with gas adjustment for easy handling. Other heights on request.
|
|
NEW 2009!!
INCLINED ELECTRIC TABLE PEDESTAL in stainless steel aisi 316L
art. 20.18898E/INOX MAX HIGH 670 mm AND MIN 390 mm
Motor available 12 or 24 Volts
Top 400 x 400 mm and base 450 x 400 mm
dimension on request!
|
|
STAINLESS STEEL AISI 316L ELECTRIC TABLE PEDESTAL.
Motor available 12 or 24 Volts.
MAX HIGH 690 mm / MIN 440 mm
|
|
teaky beach
Fully built-in sun lounger for the stern platform, the fore sundeck or the flybridge, powered by remote control electric actuators. A mere 75 mm deep when laying flush with any walkway, this lounger is constructed in polished AISI 316 stainless steel and may be finished by the shipyard in either teak or fibreglass to blend in perfectly wherever it is installed. Powered by electric actuators and supplied with a remote control Teaky Beach is available as a simple backrest version with one mobile and one fixed section or as a full lounger with one fixed and three mobile sections in two different widths. Each version is supplied with tactile anti-crush edge seals, remote control and digital control panel. The closed-cell polyurethane foam mattress may be upholstered with either marine fabric or leatherette at customer's discretion.
|
|
Massif teak folding table.
70 x 75 cm or 140 x 75 cm when open.
6 different high.
Jointed to be easly store.
|
|
Art. 60.121
Oval table in massif teak
knock-down and adjustable
in 6 height positions
cm. 130 x 82
Dim. 130x82 cm.
|
|
Folding directors chair
in stainless steel 316 mirror finish
Dimensions: W.56 D.48 H.80 cm.
folded : W.13 D.48 H.80 cm.
fabric Tempotest sand or blue
|
|
Shoes basket in teak grate and marine rope.
Available in Blue or Honey color.
73 x 44 cm.
|
|
Art. 60.101
Folding stool
in massif teak
fabric sand or blue
cm. 51x38x46
Leather socks available
|
|
Costa Brava chair
Folding chair in massif teak
cm. 56x45x85 h.
crome plated hinge
sitting height 46 cm.
fabric sand or blue.
Available fitting leather socks
|
|
Jointed table in massif teak grate.
Adjustable in height different 8 positions.
Dimension 120x75 cm.
|
|
Marine trunk
in massif teak
with blue or honey rope
Cm. 75x35x42 h.
|
|
|
Seat pedestal in light alloy, 360° rotary, adjustable in height with horizontal sliders .
|
|
- This pedestal is completely made of stainless steel 316
- Minimum height is 395 mm
- The height adjustment is 200 mm
- The lever is used to pump up and lower down as well as to block the pedestal
|
|
The HYDROMAR HD CYLINDER is a hydraulic cylinder. The cylinder is 200 mm in height adjustable. The minimum height of the cylinder is 365 mm
A complete pedestal consist of two parts, the cylinder and a stainless steel fixed part, which is available in the height 50, 100, 150, 200, 250, 300 mm
The lever is used to pump up and lower down the pedestal as well to engage the brake for the rotation
The fixed stainless steel part is so constructed that fitting the pedestal on the Multi-Rail is very easy
Also available in complete stainless steel version
|
|
- Stainless Steel Pedestal
- The voltage is 24 V
- Stroke is 150 mm
- Caution! The seat mounted on the pedestal can not rotate, but an additional rotation unit is available
|
|
• Light alloy table pedestal, fixed and removable available
• Vertical movement
• Adjustable in height. 360° rotary
• Adjustable in height to go underneath the floor
|
|
|
|
