VHF antenna VHFGPS4

dual-bandGNSSfor boats

Dual band antenna combining the International Maritime VHF band and four satellite navigation/positioning systems. The antenna is especially made for maritime identification systems, e.g. AIS. High quality dual-band VHF and active GNSS antenna for professional use 4 satellite navigation/positioning GNSS systems included: GPS, GLONASS, BeiDou and Galileo Single down-lead antenna cable design with below deck diplex filter for easier installation Electrical specifications BANDWIDTH VHF: 6.5 MHz, GNSS: 54.6 MHz ANTENNA TYPE VHF: Full 1/2 λ dipole, GNSS: Chip - no groundplane needed IMPEDANCE 50 ohm VSWR VHF: < 2.0:1 SATELLITE SYSTEM GPS, GLONASS, BeiDou and Galileo MAX. INPUT POWER VHF: 35 W LNA GAIN GNSS: Typ. 26 dB SUPPLY VOLTAGE GNSS: 2.5 - 5.5 VDC (Fed via coax connection cable and diplexer from receiver) POWER CONSUMPTION AVERAGE GNSS: Approx. 20 mW @ 5 V ANTISTATIC PROTECTION Direct Ground (DC-short) Mechanical specifications COLOR White and chrome MOUNTING On 1" threaded pole (G1"-11 thread) with Revolving Nut Kit or on optionally brackets MOUNTING PLACE On mast or deck SURVIVAL WIND SPEED 55 m/s (125 mph) CONNECTOR N-female CABLE 2 pcs short diplexer cables and 1 pcs antenna down-lead cable is needed for the installation of the system. The short diplexer cables for the GNSS receiver and the VHF-radio are included in some kits - please see "ORDERING INFORMATION"). The downlead cable between the antenna and the diplexer must be ordred seperately.