Ship winch 0.3Te

ROV umbilical cableelectric drive

0.3Te - 1000m Datasheet Weight without cable 1750 Kg Cable diameter 25.7 mm Capacity 1000 m Line speed - First Layer 55 m/min Line speed - Top Layer 79 m/min WLL - First Layer 300 Kg WLL - Top Layer 229 Kg Brake Minimum 1.5 WLL - First Layer 450 Kg Brake Minimum 1.5 WLL - Top Layer 344 Kg Supply Required 380-440V-3 Ph- 50/60 Hz Winch Electrical Motor 4 Kw IP56 IE3 Local Proportional Control Bi-directionally proportional joystick and speed control potentiometer Level wind Mechanical chain driven Dimensions (LxWxH) Footprint 2100 x 1691 x 1890 mm Slip ring Designed to accept MOFLON MF0180 or similar not within scope of supply Cable Lead-off Angle+/-30° Horizontal plane Min + 4° Max + 45° Vertical plane Frame detailsCrash frame with guards, fork lifting pockets and certified lifting lugs Winch drum dimensionsDrum core Ø 668 mm, Drum Length 1242 mm, Flange Ø 1160 mm Principle of Operation: The winch drum is mounted on the output shaft of a 4 kW SEW electric gearmotor fitted with a failsafe brake unit and is connected to the corresponding drive inverter in the control panel. The speed of the drum is proportionally controlled via a potentiometer; its direction is determined by a 3 position, spring return to centre, joystick. These are both mounted locally on the Electric Winch Enclosure. The brake, being failsafe, always defaults to on should, for any reason, electrical supply is lost or the control joystick is in its centre position. The non-drive side housings a bearing and a slipring. The Level wind is mechanically chain driven from the SEW Electric gearmotor drive shaft and the cable is guided vis the level wind carriage assembly.