rotary-knife cutting machine / pneumatic / fabric / rubber
Model FP120DT is a pneumatic cutting unit for cutting textile, technical fabrics and composite material having high thickness even with multi-layer. Thanks to the double carbide counter-blade FP120DT is able to cut on both directions (through a double air inlet). This peculiarity allow to save a run and time during the cross-cut process. The air compressed motor is made of the latest generation mechanical and pneumatic components, the excellent turbine reaches a power of 645 W at 15,500 RPM and a very high torque. FP120DT has a 120mm 8-edges knife which allows to cut any kind of materiale at the "flexible stage" up to a cutting thickness of 50mm. The push button sharpening stone allows the sharpening of the knife edge to be done in less than 10 seconds without removing the knife. The high torque and the slow speed of the knife allow the cutting of rubber material with plastic base in the carpet and light flooring application. FP120DT is especially suitable for the transversal cut and to be installed in small spaces and it is arranged with an anchor flange easy to be fitted on fixed or automatic stirrup. The aluminium Teflon® coated base reduce the friction between the foot and the material and allow the easy forward movement even for an installation sliding rails. The power and bidirectional feature make FP120DT the best solution for the most difficult O.E.M. application.