• Products
  • Catalogs
  • News & Trends
  • Exhibitions

Patrol boat CONTENDER
rescue boatinboardoutboard

patrol boat
patrol boat
patrol boat
patrol boat
patrol boat
patrol boat
patrol boat
Add to favorites
Compare this product
 

Characteristics

Type
patrol boat, rescue boat
Motor type
inboard, outboard
Material
aluminum
Other characteristics
rigid hull inflatable boat
Length

17'07" , 18'07" , 19'07"
(5.36 m, 5.67 m, 5.97 m)

Motor power

120 ch, 150 ch, 175 ch
(120 hp, 150 hp, 175 hp)

Passenger capacity

9 unit, 10 unit, 11 unit

Description

The Contender Series Rib is produced in 17’6, 18’6 and 19’6 lengths. Its design was derived from the positive attributes of both the smaller Spirit series boat and the larger Neptune series. This series is neither light duty nor designed as a commercial vessel although many are used by commercial clients. The Contenders have a clear inside deck width of 4’6” (54”) with an overall width (or beam) of 7’10” and a progressive deadrise of 18° from the transom. It has great inboard space, a generous full deck area with an optional below deck fuel system and bow locker. The floatation collar (or tube set) diameter is 20” with 5 separate air chambers. The tube is mechanically attached and removable. This style of RIB is designed for higher speed and ease of handling in virtually all water conditions: They are lighter, have greater stability and buoyancy while also being substantially more maneuverable than conventional craft. Some of the many and varied uses for the Polaris Contender series boats include scuba diving, fishing, camping, exploring, transport, research, patrol, guiding, commuting: And is extremely well suited as an all around family boat. STANDARD FEATURES INCLUDED WITH BASE BOAT: Tubes constructed of high quality neoprene/hypalon fabric Aluminum Deep V with full deck (standard is 54″ – 60″) Aluminum wide body hull 66″ Roll on non-slip decking Push/turn flush mount valves Tube topside stepping pads Inboard and outboard lifelines Deck drains Heavy duty full length rub rails Trailer bow eye (welded w/S.S.bushing insert) Below deck routing for wiring harness & cables 5’ paddles stowed inboard within paddle retainers High volume foot pump and factory repair kit
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.