Material: Marine grade alloy 5083 h 111, 3,4 and 8 mm. thickness
Lenght m. 5.70
Beam m. 2.13
Dry weight kg. 430
Draft m. 0.25
Recommended engine : from 40 to 70 hp
Performances with Yamaha F40 4-strokes engine:
Min planing speed- 7 knots@3000 rpm
Cruising speed - 20 kn @4200 rpm
Range wirh 100 L fuel : 210 miles
Max speed 28 kn @ 6100 rpm*
Max speed fully load (6 px, bags) : 26 knots at 6000 rpm
CE cat. C
* with alloy 12" prop, engine blocked by rev limiter
Akes 19 is is a new open alloy boat with great rough sea capabilites and good comfort
also requiring low power to have good performances. The hull, derived from bigger Akes models, has been designed for 40/60 hp engines or 70 hp.
Akes 19 planes at very low speed with very low trim angle, at very low revs and without need to "push" on the throttle;
this allows to ride with big load with poor decreasing of performance in any conditions, and otherwise without necessity of bigger and expensive engines.
A stable hull, transverse and longitudinally, that allow to come back in any weather and sea condition, with maximum safety and dry ride.
Easy to drive, light, but also very very stiff, due to his material (alloy 5083 marine grade, 4mm thick) and his strong stiffening system hull grid,
calculated with 3d analysis software. Akes 19 is able to withstand every stress in the sea without any care or issues.
Continue weldings and stiff deck contribute to made a monolithic structure without leaks. Unsinkable and filled with polistyrene .