ship pump / transfer / lubrication / ballast
KF 730...1500

Add to MyNauticExpo favorites
Compare this product Don’t compare this product
ship pump / transfer / lubrication / ballast ship pump / transfer / lubrication / ballast - KF 730...1500
{{requestButtons}}

Characteristics

  • Application domain:

    for ships

  • Applications:

    transfer, lubrication, ballast, for storage tanks, engine lubrication, vacuum, hydraulic system

  • Fluid:

    oil, for fuel, cooling fluid, for aggressive media

  • Technology:

    gear

  • Other characteristics:

    self-priming, custom

Description

Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also permit subsequent upgrade. The pumps are also suitable for media with low lubricating properties.

Description
Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also permit subsequent upgrade. The standard housing sections are of grey cast iron. The gear units are manufactured from high-strength case-hardening steel, hardened and mounted in special multi-compound plain bearing bushes. The standard drive shaft is sealed by single radial lip-type seal. All pump sizes incorporate helical tooth system. This feature, combined with special gear geometry, results in extremely low noise levels and reduced pressure pulsation.

Working Notes
• The fluids should ensure a certain minimum lubricating properties, should not contain solids and should be chemically compatible.
• Avoid dry operation.
• The pumps may only be operated in the specified direction of rotation, as otherwise the shaft seal will be destroyed.
• In order to prevent excessive overpressure, a safety valve should be provided in the system.