The 2100GW gun is a lightweight, hand-held, plural component spray gun for spraying limited applications of two-component materials, such gel-coats and polyesters. The spray gun is operated in the conventional manner. The trigger action starts, and stops, spraying both materials simultaneously.
The Binks 2100GW gun is recommended for:
Touch-up and repair of gel-coats • Wet-out of FRP in model work, arts and crafts
Spraying of experimental formulations in R&D
Resins salesmen’s portable “material demo” tool
Training aid in vocational schools and shop classrooms
The Binks 2100GW gun features:
Built-in air and fluid controls • Siphon container assembly directly mounted
Conventional start/stop trigger action
Easy ratio adjustment of resin to curative material
The 2100 GW gun is a lightweight, hand-held, plural component spray gun for spraying limited applications of two-component materials, such as gel-coats or polyesters. The spray gun is operated in the conventional manner. The trigger action starts, and stops, the spray of both materials simultaneously. The two materials exit separately as an atomized spray from their respective nozzles and impinge on each other approximately 6" in
front of the gun (resin) nozzzle. Here, the resulting turbulence insures intimate mixing.
The “base” resin is “cured” by addition of a curative (catalyst) in a required ratio. In the 2100 GW gun, ratios of approximately 10:1 to perhaps 33:1 are possible by extending the curative with a compatible diluent.
Preferably, the resin should be supplied from a pressure cup mounted either on the gun or located remotely from it. In some applications, a siphon cup may be acceptable.