4C Innovation Automatic Cable Reel enables to wind up to 30 meters of shore power cable, distributing it homogeneously on the reel, avoiding knot dangerous for the system.
The safety of the boat and the crew are guaranteed by the manual connection from the shore power to the electrical system of the boat.
Three security systems guarantee the entirety of the cable, of the socket and the on board electrical system.
An embedded tear proof limit switch protects the cable during winding/unwinding operations.
To protect the system when the cable is completely unwind, the machine is equipped with an integrate safety system with limit switch. It automatically stops the machine when the cable is completely out.
To protect the system when the cable is completely wind, the machine is equipped with an integrate safety system with limit switch. it automatically stops the machine when the cable is completely in.
SAFETY SYSTEM FOR CABLE CONNECTED
To avoid any problem when the system is working, the SCR is equipped with a door with traction lock sensor for operator safety and cable twist prevention. To activate winding/unwinding operations, the cable must be disconnected and the door must be closed.
ALL IN ONE
4C innovation Sea Cable Reel is an all in one machine. Electronics and parts necessary to wind and unwind the cable are embedded inside. No extra space is needed than the machine’s case.
The command panel has 4 signal status and push buttons to control the operations.
Automatic cable reel can operate from both left and right sides and even from the top.