- Maritime equipment >
- Water, Waste, Emissions and discharge reduction >
- Liquid/liquid separators for ships
Liquid/liquid separators for ships
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}

Separators of oils and hydrocarbon class I are devices that can separate, via gravity, small oily particles from a column of water via the principle of coalescence, resulting in an effluent with less than 5mg/litre (5ppm) of oil content. Filtering ...

MACFUGE separators and water treatment plants on board are designed according to main Naval Register (RINA BV, LLOYD's, NK Class, ect..) rules and to comply with the IMO standards, Fuel Oil Purifier (FOP), Separation of oily water, Bilge ...
Servizi Industriali Srl

MACFUGE separators and water treatment systems are designed according to main Naval Register (RINA BV, LLOYD's, NK Class, ect..) rules and to comply with the IMO standards, Fuel Oil Purifier (FOP), Separation of oily water, Bilge water ...
Servizi Industriali Srl

CHARACTERISTICS Macfuge separator liquid/liquid/solid separator Solid bowl machine Compact overall dimension Easy installation Reduced timing for maintenance Centrifuge complete of feeding and extraction pumps Belt drive Subject ...
Servizi Industriali Srl

The 3SEP OWS is a dual stage oily bilge water separation system utilizing differential specific gravity, coalescence plates and filtration to separate and remove free and emulsified oil. The unit is available in five different capacities; ...

The “Ocean Clean” system fulfill the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The “Ocean Clean EB” is a 3-stage oil-water-emulsion separating system. -the ...

The “Ocean Clean” system fulfill the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The “Ocean Clean EB” is a 3-stage oil-water-emulsion separating system. -the ...

The “Ocean Clean” system fulfill the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The “Ocean Clean EB” is a 3-stage oil-water-emulsion separating system. -the ...

Purification or clarification of mineral oils used in marine installations and power stations (fuel and lubricating oils). Separation takes place in a solids-retaining bowl that can be arranged for either clarification or purification. ...
Alfa Laval Mid Europe

Oily Water Separator designed to separate oil from oily water mixtures and the emulsion MARPOL REGULATION ANNEX I which limits the oil content in the bilge water that vessel can legitimately discharge into the sea. It is now a requirement ...

The bilge water oil separator 2000 effectively separates oil from water, enabling residual oil content of 5 ppm. It is characterized by the following features: .Compact design with 2-phase separation, certified by GL .1st phase MPS: ...
MAHLE Industriefiltration

PTU 15/12 is a compact filer separator for maintaining clean oil and dry oil, such as: diesel oils hydraulic oils gear oils food grade oils with a specific weight lower than that of water. The filter is a 3-micron absolute filter ...
C.C. Jensen

The New Generation of Oil Water Separator certified for 5ppm POSEIDON FIT Bilge Oil Water Separator consists of two stages; the coalescer and the emulsion breaking unit. The coalescer works on a continuous mode, by passing the second ...
Environmental Protection Engineering S.A.

Features Type approved according to IMO RESOLUTION MEPC 107 (49) 5 PPM approved by G.L. Optional with type approved FSU© by-pass function Capacity from 150 l/h up to 10.000 l/h Jet-wash oil drainage Compact design Easy installation Pump ...
DVZ-Group

OWS is an equipment to separate oil and water mixtures (Bilge Water) into their separate components before discharging from the ship.

The main purpose of the oily water separator is to separate the hydrocarbons from oily water coming from the bilge of a ship and deliver a cleaner effluent that can be discharged overboard according to IMO MEPC 107(49) regulation. The ...

The Turbulo oil water separator has a two-stage design: First Stage - A pressure system with oleophilic coalescer inserts (large surface area, corrosion-resistant) operates via a gravitational principle. Oily water is passed through ...

The JOWA 3SEP OWS is a dual stage oily bilge water separation system utilizing differential specific gravity, coalescence plates and filtration to separate and remove free and emulsified oil. The system is designed as a skid assembly ...
JOWA USA
Your suggestions for improvement:
Receive regular updates on this section.
Please specify:
Help us improve:
remaining