Boat hand pumps

PLASTIC HANDY PUMP WITH HOSE Suitable for transferring fuel, water and various liquids.

Flow rate: 54 l/min - 94 l/min

MANUAL WATERPUMP Diaphragm hand pump suitable for all boats. It can be used as primary or backup pump in case of power loss. Plastic, Ø 25,4 mm Delivery: 45-94 lt/min.

Flow rate: 60 l/min

Viking Universal’s mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels ...

Full-capacity, hand-powered bilge pump perfect for installation in tight spaces. This rugged, yet sleekly designed, single-chamber diaphragm pump provides first-rate performance and is a snap to install. It can be fitted in minutes from ...

Kayak Hand Bilge Pump (11595-2): Quickly remove 8 gallons per minute Comfortable hand grip keeps pump afloat Important safety accessory for kayaks and other small boats - canoes, small fishing boats, etc. ...

REF: SE 4750 / SE 4752 (with hose) Hand bilge pump with ergonomical and comfortable T-grip handle for betteer efficiency. High density foam on the cylinder for better flotation. With or without drainage hose.

Hand Pump Made of nylon 18510: Plastic, capacity: 12-25GPM(Max), 25.4mm hose #24/CTN

Hand Pump 18515: Nylon, 25.4mm or 38.1mm hose, 15 GPM

Hand Bilge Pump • Made of nylon • Come with deck plate and protected diaphragm • Capacity: 15 GPH • For 25.4mm or 38.1mm hose • 12/CTN Item No. Color 18519 Black

Flow rate: 8 l/min - 105 l/min

Hand pumps widely used for empty bilge and for transfer liquid such as: fresh water, sea water , diesel-oil and oil.

Flow rate: 40, 55, 80, 110 l/min

Hand pumps widely used for empty bilge and for transfer liquid such as: fresh water, sea water , diesel-oil and oil.

With this simple and ingenious tool you can easily decant all liquids (water, diesel, petrol, etc.) from a container to another without dirtying. Place the pump into the container with the liquid and the end of its hose into the transfer ...

Flow rate: 10 us gal/min

PRODUCT FEATURES Model No.: 29240-0000 Repositionable ports and body offer an amazing 96 assembly variations Complete with stainless steel handle, mounting clips and provision for safety lanyard The Amazon range of pumps is primarily ...

Low profile compact range - ideal to fit in confined spaces The Low Profile Underdeck Manual Bilge Pump. Designed for confined spaces where you have limited space to fit your pump COMPAC 50 compact design easily installed in tight bilge ...

Ideal for use where battery power is not available or as a backup to electric pumps, the diaphragm bilge hand pump is easy to use and has a capacity of 6,5 gallons at 60 strokes. It features a built-in non-return valve, which can be easily ...

TheSystem 50 Hydraulic Panel is at the heart of a Navtec hydraulic system, putting the operator in complete control of up to four functions, including halyards, Cunningham, mast jack, traveller, vang, backstay, or outhaul functions. System ...

Stainless steel rod for strength and durability. Large handles for easier operation. Easily disassembled for easy cleaning. Backed up by the Scotty Lifetime Warranty. - 13 1/2 " Bilge Pump - 13 strokes per gallon

Injection Molded Nylon Manual Bilge Pumps have removable hoses and storage clips.

The Beckson THIRSTY-MATE ® hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE ® hand pump ...

Small volume hand pump for adjusting the firmness of fenders. Blue inflation adapter included.

Extremely strong model entirely buit in stainless steel whit high strenght nylon membrane. The outstanding performance demostrated in gruelling stress tests guarantees absolute reliability. The handle, with its non-slip grip, can be removed ...

Available colors: Gray (90191) and black (90190) Width: 150mm Height: 100mm Length: 275mm Hose diameter: 25mm Info: 0,5L/pull

Semi-rotary hand pump, self priming, double acting, reciprocating action with body and internal parts made of bronze (B) or cast iron body and cover and bronze internal parts (GB). On request Viton seals (V).

For commercial or leisure marine bilge pumping applications, the Sludge Sucker Basic polypropylene hand pump series provides a compact and easy way to get your job done. This pump is available with a either a 1" connection, see larger ...

This is a good manual bilge pump for small to medium-sized boats. Lightweight and sturdy, its easy lever action allows fast pumping. Easy to use and maintain, the diaphragm is quickly accessed for removing debris.

Edson 30GPM Portable Pump Kits are complete pumping systems that include the #117AL Pump mounted on a Carrying Board with 32” Handle. Quick Clamp Hose Fittings and a single 20’ length of hose supplied for optimum configuration by customer. ...

Strong self priming bilgepump, hand operated. Simple construction, therefore maintenance free. Bulkhead mounting. Can be installed in any position. Black plastic pump housing, nitril oil resistant membrane and valves. Capacity: approx. ...

Available m semi-rotary and alternative with double effect Material: cast iron, bronze and s/steel Suitable for fresh and seawater

This compact, lightweight pump has been designed for surface mounting on the deck or bulkhead. The body and ports can be positioned in 96 different ways for maximum flexibility of installation. Simple, reliable and inexpensive, this pump ...

The LeeSan Light Duty Manual Self Pump Out Kit has been designed for boat owners who need to be able to pump out their own waste tanks to a sewer or portable tank on an occasional basis. The kit features a waste diaphragm pump and all ...