Easy to mount - no drilling holes. Hook & loop fixing, with sticky back. Mesh bottom for drainage & ventilation. Width140 mm Height280 mm Length90 mm Weight140 g Durable, water repellent and U.V. resistant acrylic.
Made of webbing tape and aluminium steps. The ladder has to be fixed at the mast base with the fixings supplied (ideally fixed under the boom goose neck fitting) and has then to be put under tension by means of a halyard winch. The ladder ...
Working load (WL) : for nautical applications Working Load Limit (WLL): for industrial applications only. The safety factor is 5 times the breaking load. WLL Breaking load / 5 Eye bolt - M6*100 - Length: 40 mm Description A ...
Fender eye plates Dimensions80 x 35 x 21 mm Brass fender eye plates. Stud fixing. Finish .L Polished .C Chromed
Fender eye plates Dimensions53 x 30 x 21 mm Brass fender eye plates. 3 screws fixing. Finish .L Polished .C Chromed
DESCRIPTION The new big boat accessories have a fresh new look! The heavy-duty polyester accessories have the hook and loop straps to attach them but are also updated with the new thumlock system to fix the accessories easy on the ...
The Barton Winch handle, Part no. 21 053 is manufactured in the UK from flexible dip moulded PVC to enable a wide range of handle types to be stored quickly and securely. The pocket measures size 320mm x 90mm x 50mm and requires four ...
Manufactured from 316 stainless steel. Sizes M6 to M12. Right hand thread only.
Eye Nut Material: SS304/SS316 Size: M5 to M30 Surface Treatment:"EP" (Electro Polished)
Eye Bolt With Wood Thread Material: SS304/SS316 Size: 6x40mm TO 12x140mm Surface Treatment:"EP" (Electro Polished)
DIN582 Eye Nut Material: SS304/SS316 Size: M5 to M30 Surface Treatment:"EP" (Electro Polished)
Round Pad Eye Bolt *Materials: SUS304 Anchor Plug: Zinc Die-cast
The Lock®, is a textile fastener with an adjustable eye, designed to quickly and safely fix low-friction rings. Ideal for reefing on mainsail. + USE - Textile quick fastener with adjustable eye for low-friction ring of different ...
The textil block is a tie system especially designed for the clew point (ring, strap...) The textil block is a Dyneema® cutted loop, delivered with the System block® locking ring.
The eye strop is a universal soft strop, ready to be used, designed to quickly attach shackle, snap-shackle, etc. The strop can be spliced directly to the halyard or sheet core, see tutorial
Step by step on the mast Our mast ladder can be adapted to any mast and has optimal guidance thanks to adjustable side rollers. Perfect for one-handed sailors and easy to use. No fittings are necessary and offers perfect guidance ...
The right place for the winch handle With the winch handle bag, it is always tidy and ready to hand. Available in 2 sizes ( 32 x 11 cm / 40 x 13 cm ). The special material does not absorb water and is absolutely breathable. It is ...
CLEVIS PINS High Polished Stainless Steel - AISI 316
Standard Wire Rope Clips are designed for maximum holding strength. Heavy duty construction throughout. For in-between sizes such as 5/32, 7/32, ect, use next larger size wire rope clip. Wire Rope Clips are effective hardware for installing ...
Rugged Stainless Steel Saddles with grooved deep recess to hold cable securely. Stainless Steel U bolts and nuts.
Cotter Pins PI5 series secures clevis pin's in the hole of the part.
>Adjustable waist belt from 75 to 120cm – for all sizes >compatible with all winch handle 204 to 253mm – universal cover with articulation >allows to follow the mouvement of the hip. Excellent freedom of mouvement elastic strap ...
Small and compact in size, but big enough to fit two winch handles. Available in a single model and a double model. These products have our Velcro Fixation System so assemble without drilling holes. 91101542 Winch Handle Pocket Single
FIXED PAD EYE RANGE HT91058 Stainless Pad Eye & Alloy Underdeck Pad (5mm) HT91059 Stainless Pad Eye & Alloy Underdeck Pad (6.5mm) HT91060 Stainless Pad Eye & Alloy Underdeck Pad (8mm)
Stainless steel 316 swivel base plate to mount mainsheet blocks in the Optimist
Robship Winch Handle Holders have been designed to accommodate both 8in (200mm) and 10in (250mm) handles. The sides are tapered down to roll the winch handle to one side which stops that annoying "clunk" every time the boat rolls We ...
Base & 5mm Loop 4 Fixing Category:Spars and Rigging Subcategory:Swivels and Bases Type:Bases and Padeyes Weight (grm):22 Diameter (mm):5 Break Load (Kgs):1300 Fixing Size (mm):5 Fixing Quantity:4
Schaefer offers a wide variety of Stainless Steel Clevis Pins and Cotter rings to fit your rigging.
FEATURES Simplifies the process of putting a large cover on a boat, where snaps might not adequately hold cover. Base installs where the snap base would go. Pin goes through the grommet hole in the cover and inserts securely ...
Your suggestions for improvement:
Receive regular updates on this section.