NMEA to 0183® PC network interfaces
The MD36/5/W is a weatherproof, solid-state Synchro to NMEA Digital Interface. Designed as a converter of AC Synchro transformer-based transmissions of ships heading from legacy equipment, to a modern IEC61162-1 (NMEA 0183) compliant ...
The MD36/8 is a solid-state digital NMEA to STEP (Analogue S-Type) Interface Converter for applications where there is a need for low power retransmission of digital NMEA heading data to legacy STEP equipment. The MD36/8 is a solid-state ...
OVERVIEW The MD36/6 is a solid-state Step (S-Type) to NMEA Interface. It converts a DC Step (S-Type) transmission of a ship’s heading from legacy equipment to a modern NMEA 0183 compliant Digital Transmission format. There is an alignment ...
OVERVIEW The MD36/5 is a solid-state Synchro to NMEA Interface. It converts an AC Synchro-transformer based transmission of ships heading from legacy equipment to a modern IEC61162-1 (NMEA 0183) compliant Digital Transmission format. Constructed ...
The MD34/8 115-90V-400 is a solid state NMEA to synchro interface designed to convert ships heading information from NMEA 0183 protocol to 400 Hz Synchro format with a reference voltage of 115 V ac and a single voltage of 90 V line to ...
OPTO-4 Serial Opto Isolator Isolate an RS232 (PC) port to protect against ground loops. The OPTO-4 provides a safe and low cost way of connecting an NMEA 0183 system to a PC or any other device with a standard RS232 9-pin port. As a ...
Your suggestions for improvement:
Receive regular updates on this section.