|
|
|
The widespray dispersant system comprises of a diesel/electric/hydraulic driven pump set, a pair of spray arms fitted with special nozzles and a set of hoses for the suction of seawater dispersant and discharge to the spray arms.
|
|
MAVI DENIZ manufacture and supply a number of different sizes of Boat Spray sets are available, ranging from large, permanently mounted equipment for use on tugs to small, portable inshore spray sets for use by small vessels.
MAVI DENIZ supply 2 (two) different types of models for the boats.
MAVISPRAY E Model is ; Fixed permanent type electric installed dispersant spray system for the application of oil dispersant from vessels and Boats.
MAVISPRAY D Model is ; Portable diesel driven dispersant spray system for beach use or operation from Oil recovery Vessels, Tugs, Offshore Supply Vessels or other Craft.
|
|
|
|
|
|
|
Neat Sweep® collects a broad swath of oil, funneling the slick into a narrow band where dispersant is applied at full concentration. Neat Sweep® is the most efficient dispersant application system available.
·Dispersant is applied 'Neat' (undiluted) for maximum efficiency.
·Concentrates oil into a narrow band of uniform thickness.
·Personnel has virtually no exposure to air borne dispersant mist.
·Ideal for use with vessels of opportunity.
ADVANTAGES
·Allows the 'neat' (full concentration) application of dispersant directly on the oil. This reduces the amount of dispersant that is wasted through evaporation and mis-targeting that happens with other application methods.
·Concentrates a broad swath of oil slicks, varying in thickness, to a band of oil, uniform in thickness. Reduces overdosing and under dosing.
·NeatSweep® allows very high payloads, since dispersant is carried on towing vessels.
·Dispersant is applied hundreds of feet downwind from people and equipment, greatly reducing the risk of exposure.
·Using NeatSweep® reduces the dependence on multiple aircraft, making air operations safer.
·Sensors control dispersant application and provide monitoring of important data related to application parameters.
|
|
|
AccuDock's unique rail system incorporates the long proven method of storing a boat - our rail system is much like the bunks of a boat trailer. Boat hulls are built to be supported along their length - not just pressure points that roller systems provide. Our system utilizes rollers to assist getting onto the float - but the rails support the vessel - the boat does not sit on rollers.
|
|
|
|
|
|
|
The Dual Voltage systems come supplied with two power cables, both of which should be connected in order for the unit to automatically switch between AC and DC, according to the available source.
The Ultra 10 dual comes with one single transducer and is suitable for boats with a waterline length of 10 metres.
The solution is simple!
The Ultrasonic Antifouling unit destroys algae and prevents barnacle growth, so they don't attach themselves to your hull.
How Ultrasonic Antifouling works
The control box sends a variety of pulsed ultrasonic signals to the transducer, which in turn emits a series of low power, low frequency sound waves which are virtually inaudible to the human ear. They create a wall of moving water molecules over the whole of the submerged hull. The micro - environment which exists as a result, destroys algae and barnacles so they don't attach themselves to your hull. 'The science' is in the differing frequencies and the harmonics set up within.
It's as simple as that and it works!
|
|
The Ultra 10 AC unit is powered from the Mains supply and this can be used within the range of 110 - 240v . It has one single transducer and is suitable for boats with a waterline length of up to 10 metres.
The solution is simple!
The Ultrasonic Antifouling unit destroys algae and prevents barnacle growth, so they don't attach themselves to your hull.
How Ultrasonic Antifouling works
The control box sends a variety of pulsed ultrasonic signals to the transducer, which in turn emits a series of low power, low frequency sound waves which are virtually inaudible to the human ear. They create a wall of moving water molecules over the whole of the submerged hull. The micro - environment which exists as a result, destroys algae and barnacles so they don't attach themselves to your hull. 'The science' is in the differing frequencies and the harmonics set up within.
It's as simple as that and it works!
|
|
The Ultra 10 DC unit operates on a 12 - 24 volts supply. It has one single transducer and is suitable for boats with a waterline length of up to 10 metres.
The solution is simple!
The Ultrasonic Antifouling unit destroys algae and prevents barnacle growth, so they don't attach themselves to your hull.
How Ultrasonic Antifouling works
The control box sends a variety of pulsed ultrasonic signals to the transducer, which in turn emits a series of low power, low frequency sound waves which are virtually inaudible to the human ear. They create a wall of moving water molecules over the whole of the submerged hull. The micro - environment which exists as a result, destroys algae and barnacles so they don't attach themselves to your hull. 'The science' is in the differing frequencies and the harmonics set up within.
It's as simple as that and it works!
|
|
|
|
|
|
|
Ultra Solar is a new stand-alone system which complements the existing Ultra range. It is designed to give boatowners without access to a shore power supply the opportunity to benefit from having an Ultra system fitted to their boat - something which was not previously possible.
The solar controller has been specially designed to control the power between solar panels, battery and the Ultrasonic Antifouling system.
The intelligent unit keeps your battery in good health and provides the Ultrasonic system with the correct amount of electrical power. According to the voltage of your battery the controller will adjust the charge current and decide if it needs to supply the electrical loads.
Commenting on the launch, Managing Director, David Sothcott said, "Ultra Solar came about as a result of feedback from boatowners who wanted to install the original Ultra product but were unable to due to lack of a suitable power supply. We have responded to that demand, and are excited that we can now offer a solution that makes the system available to all."
Ultrasonic Antifouling has seen a massive rise in demand for its environmentally-friendly system, which uses high frequency, low power sound waves to destroy algae and therefore prevent weed and barnacle growth.
|
|
|
|
|
|
|
The Dual Voltage systems come supplied with two power cables, both of which should be connected in order for the unit to automatically switch between AC and DC, according to the available source.
The Ultra 20 dual has two transducers and is suitable for boats with a waterline length of up to 20 metres.
The solution is simple!
The Ultrasonic Antifouling unit destroys algae and prevents barnacle growth, so they don't attach themselves to your hull.
How Ultrasonic Antifouling works
The control box sends a variety of pulsed ultrasonic signals to the transducer, which in turn emits a series of low power, low frequency sound waves which are virtually inaudible to the human ear. They create a wall of moving water molecules over the whole of the submerged hull. The micro - environment which exists as a result, destroys algae and barnacles so they don't attach themselves to your hull. 'The science' is in the differing frequencies and the harmonics set up within.
It's as simple as that and it works!
|
|
The Ultra 20 AC unit is powered from the Mains supply and this can be used within the range of 110 - 240v . It has two transducers and is suitable for boats with a waterline length of up to 20 metres.
The solution is simple!
The Ultrasonic Antifouling unit destroys algae and prevents barnacle growth, so they don't attach themselves to your hull.
How Ultrasonic Antifouling works
The control box sends a variety of pulsed ultrasonic signals to the transducer, which in turn emits a series of low power, low frequency sound waves which are virtually inaudible to the human ear. They create a wall of moving water molecules over the whole of the submerged hull. The micro - environment which exists as a result, destroys algae and barnacles so they don't attach themselves to your hull. 'The science' is in the differing frequencies and the harmonics set up within.
It's as simple as that and it works!
|
|
The Ultra 20 DC unit operates on a 12 - 24 volts supply. It has two transducers and is suitable for boats with a waterline length of up to 20 metres.
The solution is simple!
The Ultrasonic Antifouling unit destroys algae and prevents barnacle growth, so they don't attach themselves to your hull.
How Ultrasonic Antifouling works
The control box sends a variety of pulsed ultrasonic signals to the transducer, which in turn emits a series of low power, low frequency sound waves which are virtually inaudible to the human ear. They create a wall of moving water molecules over the whole of the submerged hull. The micro - environment which exists as a result, destroys algae and barnacles so they don't attach themselves to your hull. 'The science' is in the differing frequencies and the harmonics set up within.
It's as simple as that and it works!
|
|
|
|
|
|
|
Ultra Solar is a new stand-alone system which complements the existing Ultra range. It is designed to give boatowners without access to a shore power supply the opportunity to benefit from having an Ultra system fitted to their boat - something which was not previously possible.
The solar controller has been specially designed to control the power between solar panels, battery and the Ultrasonic Antifouling system.
The intelligent unit keeps your battery in good health and provides the Ultrasonic system with the correct amount of electrical power. According to the voltage of your battery the controller will adjust the charge current and decide if it needs to supply the electrical loads.
Commenting on the launch, Managing Director, David Sothcott said, "Ultra Solar came about as a result of feedback from boatowners who wanted to install the original Ultra product but were unable to due to lack of a suitable power supply. We have responded to that demand, and are excited that we can now offer a solution that makes the system available to all."
Ultrasonic Antifouling has seen a massive rise in demand for its environmentally-friendly system, which uses high frequency, low power sound waves to destroy algae and therefore prevent weed and barnacle growth.
The company currently offer four easy to install models - the Ultra 10 (AC or DC) and the new Ultra 10 dual, for boats up to 10m, and the Ultra 20 (AC or DC) and the new Ultra 20 dual for boats up to 20m. Each system consists of a control box and either one or two transducers which are bonded to the inside of the boat's hull.
|
|
Boatsonic is a unique, small, but extremely effective method for the removal and prevention of algal growth on boat hulls.
Installation is very simple. All you need to do is fix the Boatsonic on the inside of the boat below the waterline, and algae and other biofouling organisms will be removed ultrasonically.
The biggest advantage of the Boatsonic is that annual antifouling becomes unnecessary.
The system benefits the environment by eliminating the need for antifouling paints, forever!
|
|
Boatsonic is a unique, small, but extremely effective method for the removal and prevention of algal growth on boat hulls.
Installation is very simple. All you need to do is fix the Boatsonic on the inside of the boat below the waterline, and algae and other biofouling organisms will be removed ultrasonically.
The biggest advantage of the Boatsonic is that annual antifouling becomes unnecessary.
The system benefits the environment by eliminating the need for antifouling paints, forever!
|
|
Boatsonic is a unique, small, but extremely effective method for the removal and prevention of algal growth on boat hulls.
Installation is very simple. All you need to do is fix the Boatsonic on the inside of the boat below the waterline, and algae and other biofouling organisms will be removed ultrasonically.
The biggest advantage of the Boatsonic is that annual antifouling becomes unnecessary.
The system benefits the environment by eliminating the need for antifouling paints, forever!
|
|
Boatsonic is a unique, small, but extremely effective method for the removal and prevention of algal growth on boat hulls.
Installation is very simple. All you need to do is fix the Boatsonic on the inside of the boat below the waterline, and algae and other biofouling organisms will be removed ultrasonically.
The biggest advantage of the Boatsonic is that annual antifouling becomes unnecessary.
The system benefits the environment by eliminating the need for antifouling paints, forever!
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
30" Tapered Radar Mount For All 2kW / 4kW Radomes & All Open Array Radars Up To 4%u2019
PMA-100
30" Tapered Radar Mast With Spreaders For All 2kW & 4kW Radars
|
|
Scanstrut's SC100 Pole Mount allows installation of your radar or small satcom antenna onto the deck or transom of your boat.
Features
- Adjustable base, able to rotate through 360° and angle from horizontal all the way to vertical
- Unique pole extrusion accommodates two cable channels with a cover strip to hold cables in place
- Supplied with two support modules providing maximum fore / aft and sideways bracing
- Easily removed for racing or winter storage, leaving just low profile base on deck
|
|
Available as a deck mounted or through deck installation:
Deck Mounted
Features
- Ideal for installations on decks, cabin roofs, low arches and other areas where minimal elevation is required
Through Deck Mounted
Features
- Provides maximum stability for taller installations and heavier antennas
- Recommended minimum of 0.6m / 20" below deck
|
|
|
Seaview modular mast are available in 3 and 4" diameter aluminium tube. There are adapted for any kind of Radar, TV and Satcom antennas. They can have either a fix, ajustable or thru deck fitting. Accessories will complete the unit will lights, davit for HB engine....They are cut to the request lenght from 50 cm up to 5 Meter.
|
|
|
Our Satellite Antenna Pole Mounts are constructed from high quality marine grade aluminum tubing with an Aluminum Die-Cast Base and Top, then treated with an anodized primer and then finished with a brilliant white powder coated finish. Designed specifically to fit all Satcom/TV Domes. Available in 9 in. to 10 ft. lengths. The last number at the end of the part number indicates the Pole length desired. For example, A 5' pole for a KVH 4 would be AP-4B-5.
|
|
30" Tapered Radar Mount For All 2kW / 4kW Radomes & All Open Array Radars Up To 4%u2019
PMA-100
30" Tapered Radar Mast With Spreaders For All 2kW & 4kW Radars
|
|
|
|
see the results for the following category : 
