Boat bilge operation and control panel
(with alarm) Smart Switch Technologies
BILGE CONTROL BC-8000

The Smartswitch BC-8000 Controller provides an intelligent networked solution for the monitoring and control of up to eight bilge areas. When any bilge area runs for more than one minute an alarm sounds. If the high float detects water the alarm will sound. You can controll the pump by switch the system into manual mode. The system is happy with pumps up to 40 AMPS. Want to know how many times the bilge area pupm was activated? Easy with the BC-8000 from Smartswitch
The system consists of the BC-8000 display controller (as seen above) up to eight BC-100 or BC-100/P controllers and one (optional) RB-800 repeater displays. The system communicates via a 2-wire network cable with a maximum cable length of 1000 meters

More specifications...