Speed sensor 90-60-369
anemometerwind vaneangle

speed sensor
speed sensor
Add to favorites
Compare this product
 

Characteristics

Measured value
speed, anemometer, wind vane, angle
Application domain
for boats
Power supply

Min.: 10 V

Max.: 16 V

Description

STANDARD WIND UNIT The wind sensor measures the wind angle through 360°. It is easy to install on the mast headand an offset value can be applied to adjust the alignment to the boats centreline. This offset is usually required as the mechanical alignment achieved during installation is not accurate enough. The wind angle value is dependent on getting the alignment correct first. HR WIND UNIT The wind sensor “HR” is highly accurate for both angle and speed measurements: less than 1° for wind angle and less than 1% for wind speed linearity. It measures wind angle through360° and its sensitivity allows wind speed measurement below 2 knots. It is easy to install on the mast head. An offset value adjusts the alignment to the boats centreline. This offset is usually required as the mechanical alignment achieved during installation is not accurate enough.The wind angle value is dependent on getting the alignment correct first. This sensor is available with a long vertical arm (see Carbowind). FEATURES The wind sensor measures data used to determine: True wind angle and speed (when a speedometer is connected to the system) in knots or meters per second, Air temperature in °Cor °F, VMG (Velocity Made Good)

Catalogs

No catalogs are available for this product.

See all of nke Marine Electronics‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.