Straight-knife cutting machine KVS 900

electrictextilefor shipyards

The KVS 900 straight-knife cloth cutter is the machine for the job. Ideally suited to cutting every type and design of textile material, though particularly for cutting thick layers, tight curves and acute angles. Straight-knife cloth cutter for average layer heights, even for difficult to cut materials, high cutting accuracy thanks to the very small dimensions of the base plate, support and blade, fatigue-proof work with quiet running, good overview and low weight. We play it safe when it comes to safety. Just like all Kuris models, the Kuris KVS 900 meets the relevant safety standards. Possible sources of danger are already ruled out at the design stage. Therefore the presser foot bar with only a 13 mm gap from the blade takes on an additional function as a blade guard. An important feature (especially with the KVS 900) is that it is not possible for the grinding device drive to be damaged when the grinding device comes up against an obstacle (e.g. a layer of material). The very high lifting speed of the grinding head at approx. 1 s per sharpening operation reduces sharpening times quite considerably, making it possible for the grinding wheel to reach an optimum of 7 rpm. The blade is sharpened on both sides as it is lifted up and down. Unusually even and exact. The layers of material are therefore always cleanly cut, free from fraying right down to the bottom layer of material. Benefits: Exact, sharp cut thanks to the automatic grinding device with whetstones Sturdy special motor with a high power margin Narrow supports reduce effort Low base plate with a special surface minimizes slide resistance