Kilo-Pak offers sound attenuating enclosures. These innovative sound shields represent a significant departure from designs currently on the market. Design criteria included not only sound attenuation but also ease of maintenance and installation. Both sound shields incorporate a strong, corrosion resistant stainless steel base not unlike Kilo-Pak%u2019s standard stainless steel drip pan base. The bases are setup to receive, locate and align the other members of the enclosures. The lightweight fiberglass sound shield Quiet Pak, for the 8kW through 30kW generator sets, employs a honeycomb core sandwiched between two layers of fiberglass. During lay-up vacuum bagging insures proper lamination and fit. This design gives a great deal of strength and rigidity, while eliminating the need for typical sound attenuating foam on the inside of the shield. The gel coated exterior as well as the fiberglass inside are easy to clean and maintain. The shield is held together by a system of locating pins and latches and it can be completely disassembled and removed in less than a minute. Penetrations are provided for exhaust and electrical cables as well as fuel and oil lines. Our Whisper Pak sound shields for sizes 30kW through 300kW, employ stainless steel or powder coated aluminum panels. Like the smaller units these shields are held together by a system of locating pins and latches and can be quickly removed.