A smarter way was needed to secure equipment
to timber and composite decks and hulls. Now
the JEC Marine Firmlock provides an elegant and
effi cient solution.

Securing equipment to timber decks and hulls
can be diffi cult if you need to remove bolts and
replace them from time to time. Traditionally a
metal plate would be secured to the timber and
equipment bolted to that with problems of trapped
water, unnecessary weight and complexity etc.
With the JEC Marine FirmLock, a stainless steel
insert is screwed and epoxied into the timber or
fi breglass, leaving a neat ‘SecuraLock’ thread.
‘SecuraLock’ threads accept standard thread
bolts without the need for spring washers so you
can use counter-sunk bolts. Now you can have
complete confi dence in a watertight and secure
anchor point.

JEC Marine FirmLocks are available in 2 sizes, M8
and M6 with other sizes available on request.

JEC Marine FirmLocks have a 4.3mm keyway
machined down the outer thread and a bevelled
bottom edge to allow excess epoxy to escape the
hole.