Sludge and solid waste incinerator for ships
PYRALL PY ISIR Impianti

Solid wastes are fed into the incinerator through the garbage door and incinerator is then switched on.
For the combustion of pumpable waste, the homogenizer (L) positioned on the sludge service tank, has to be started up, after the neccessary water setting and drainge. It's now necessary to switch the sludge pump (H) so as to feed the sludge into the incinerator.
Heated by an electric heater (Q) the sludge is fed to the main burners (B) and sprayed into the furnace. The pilot burner (A) fed by the Diesel-oil pump (I) ignites or vaporizes the sludge depending upon its condition.
The air fan (C) is installed to supply air for combustion, aswell as for cooling and dilution, to ensure a flue gas temperature below 350°C.
The atomized air for the main burners (B), comes from the air pressure reducing device (D) fed by the ships compressed air service piping, or alternatively by an air blower. The monitoring and control devices installed in the control panel, modulate the incinerator action on the thermal load and carry out its automatic and operation.