Our Gel Coat and Colorant Group offers iso/NPG®, isophthalic, low VOC, vinyl ester, vinyl ester barrier, and general-purpose gel coat systems to protect and beautify your marine FRP parts. Also available are sanding primer gel coats for manufacturers who post-finish their fiberglass parts. Many of these gel coats are CSA-approved. Our B-853BV-LMM black vinyl ester gel coat provides a superior osmotic barrier and is sprayed on after the gel coat. It can also be sprayed "wet on wet" before the gel coat has fully cured which ensures better bonding between the gel coat and the barrier coat. It also has very good tensile elongation, impact resistance and provides excellent resistance to chemical attack and cracking. These characteristics can extend product life. Many customers have found that the barrier gel coat acts as an excellent print barrier to improve part cosmetics. Interplastic's low VOC gel coats deliver outstanding product performance and compliance with Southern California's South Coast Air Quality Management District's Rule 1162 and ANSI Z-124.3 sanitary ware tests. Our low VOC, pigmented gel coats have a 25 - 33% decrease in styrene levels over typical pigmented gel coats and have a weight loss below 60 grams per square meter. This satisfies two points of compliance with Rule 1162; only one is required. The low VOC gel coat product line and our other gel coats are available in a full array of colors.