Boat ceiling-mounted luminaire (LED, for interior lighting)
EuroLED 115
Hella Marine
Efficient EuroLED LED downlights provide a viable alternative to 20W incandescent lamps and offer substantial energy savings.
EuroLED® 115mm LED downlights have a wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K).
Power consumption is <4.5W per lamp (<0.37A@12V / <0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting. Sophisticated lens and optic designs provide intense white light without glare or eye strain. Peak beam angle is a wide 54° and the light patterm is very uniform.
EuroLED 115mm lamps require no remote drivers or control wires, connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can be fully dimmed and controlled via PWM based products like the Hella marine 2 Group Light Dimmer (5XA 998 572-001).
Internal Multivolt electronics also provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability. Pre-wired with quality twin core marine tinned cable, each lamp is completely sealed only 22mm mounting depth.
EuroLED lamps can be installed almost anywhere onboard, interior or exterior, wet or dry. The low heat signature will not cause damage to surrounding materials.
Bezel finishes include highly polished 316 stainless steel or UV resistant bright white plastic. Surface mount versions are available pre-wired with an ON/OFF rocker switch integrated into the side of the housing.
Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free 'fit and forget' technology.
EuroLED® 115mm LED downlights have a wide spread illumination with class leading colour rendering and interior enhancing colour temperatures in white (5000K) or warm white (3000K).
Power consumption is <4.5W per lamp (<0.37A@12V / <0.18A@24V) offering substantial power saving and heat reduction onboard compared to incandescent lighting. Sophisticated lens and optic designs provide intense white light without glare or eye strain. Peak beam angle is a wide 54° and the light patterm is very uniform.
EuroLED 115mm lamps require no remote drivers or control wires, connect the positive and negative cables to 12V or 24V DC systems. Each lamp operates on an input voltage between 10-33V DC and can be fully dimmed and controlled via PWM based products like the Hella marine 2 Group Light Dimmer (5XA 998 572-001).
Internal Multivolt electronics also provide robust reverse polarity, spoke and over-voltage protection for ongoing reliability. Pre-wired with quality twin core marine tinned cable, each lamp is completely sealed only 22mm mounting depth.
EuroLED lamps can be installed almost anywhere onboard, interior or exterior, wet or dry. The low heat signature will not cause damage to surrounding materials.
Bezel finishes include highly polished 316 stainless steel or UV resistant bright white plastic. Surface mount versions are available pre-wired with an ON/OFF rocker switch integrated into the side of the housing.
Hella marine LED downlights represent the very latest in class leading energy efficiency and maintenance free 'fit and forget' technology.
-
zoom








