Pollution control work-boat : oil spill recovery boat
SPILLGLOP SG-180 (CATAMAR)
ECOCEANE CATAGLOP
- 18m 
59' 1"ft
Offshore oil spill recovery vessel for use with major oil slicks and discharges. SPILLGLOP® SG180 (Catamar) can work efficiently up to force 5 and with a clean up rate of 100 m3/hr continuously.
To fight HNS pollution, absorbents can be stored on-board and then spread out using the water system installed for fire fighting.
Storage
For minor pollution (less than 50 m3) or for discharges, SG180's inner storage capacity is sufficient.
In case of major pollution, recovered hydrocarbons are progressively transferred from the SPILLGLOP® SG180 (Catamar) into a bunker barge sailing behind (bunker barge storage capacity : +1000 m3). With a rotation of bunker barge the recovery capacity are unlimited.
1 000 m3 barge equipped with an integrated screw pump can be towed by Catamar increasing its own storage capacity while waiting for the bunker barge to arrive.
How it works
A turbine pulls a stream of water through a tank equipped with a mesh to filter out solid waste. The stream is then separated into two :
First stream : the turbine pumps away the clean water
Second stream: surface water, polluted with oil and hydrocarbons, is channeled into a hydrocarbon separator where the hydrocarbons are stored floating on the water. Clean water within the separator joins the main stream and is rejected through the turbine.
Features
Working speed 4 knots
Considering the weather conditions in the working area, SPILLGLOP® SG180 (Catamar) performs as follows :
Beaufort force 4 included : 40,000 m2 cleaned per hour with her arms covering a 6 m width
From and above Beaufort force 5 : 20,000 m2 cleaned per hour on a 3 meter band with
Recovered hydrocarbons are not emulsified, neither during the recovery process nor during the transfer operation. They remain in the very state as they were floating.
59' 1"ft
Offshore oil spill recovery vessel for use with major oil slicks and discharges. SPILLGLOP® SG180 (Catamar) can work efficiently up to force 5 and with a clean up rate of 100 m3/hr continuously.
To fight HNS pollution, absorbents can be stored on-board and then spread out using the water system installed for fire fighting.
Storage
For minor pollution (less than 50 m3) or for discharges, SG180's inner storage capacity is sufficient.
In case of major pollution, recovered hydrocarbons are progressively transferred from the SPILLGLOP® SG180 (Catamar) into a bunker barge sailing behind (bunker barge storage capacity : +1000 m3). With a rotation of bunker barge the recovery capacity are unlimited.
1 000 m3 barge equipped with an integrated screw pump can be towed by Catamar increasing its own storage capacity while waiting for the bunker barge to arrive.
How it works
A turbine pulls a stream of water through a tank equipped with a mesh to filter out solid waste. The stream is then separated into two :
First stream : the turbine pumps away the clean water
Second stream: surface water, polluted with oil and hydrocarbons, is channeled into a hydrocarbon separator where the hydrocarbons are stored floating on the water. Clean water within the separator joins the main stream and is rejected through the turbine.
Features
Working speed 4 knots
Considering the weather conditions in the working area, SPILLGLOP® SG180 (Catamar) performs as follows :
Beaufort force 4 included : 40,000 m2 cleaned per hour with her arms covering a 6 m width
From and above Beaufort force 5 : 20,000 m2 cleaned per hour on a 3 meter band with
Recovered hydrocarbons are not emulsified, neither during the recovery process nor during the transfer operation. They remain in the very state as they were floating.
-
video
-
zoom
