Dock float Dock Edge
HOWELL 400 & 550

Rotational Molded from high density black virgin polyethylene with UV inhibitors ensures the most rugged float possible. Wall thickness minimum of 5/16" and up to 1/2" at fastening points and corner edges. Extremely strong resistance to splits and punctures.

Howell 550
Recessed flanges and center channel allow this versatile float to be used on standard 2' or 4' centers. Using standard 2" x 6" lumber the surface for the dock will be situated about 14" above the water. (based on 25 lbs. flotation /sq. ft. of dock). Use 8", 10" or 12" to increase freeboard.

1" Drainage plug with sloped channel to elimate water accumulation around the plug. Add water for ballast or to achieve neutral bouyancy when retrofitting old docks. Pump water out after positioning the float.

Recessed Corners for clearance of most hardware and nut and bolt heads. This reduces the chance of rub through allowing the float to be positioned tightly into the corners and flush wih edges for maximum stability.

Flotational Capacity of the Howell 550 is 550lbs. Measures: 24" x48" x16" high and a tare weight of 40 lbs. Can be shipped UPS or up to 10 floats per standard skid.

Howell 400
Flotational capacity for the Howell 400 is 400 lbs. Measures: 24" x48" x12" high and a tare weight of 28 lbs. Can be shipped UPS or up to 12 floats per standard skid.

Foamed Filled Floats - Howell 400 is available foam filled for commercial use and applications that do not require water for ballast.

More specifications...