Cruising sailboat (deck saloon)
331 DS
Degerö
- 9.94m 
32' 7"ft
General Construction:
Hull:
The hull is made of hand-laid GRP with a balsa sandwich above the waterline (remaining solid where shrouds, stays etc. are attached to the hull). Integral longitudinal and transverse beams provide additional strength and rigidity. Structural bulkheads are hand-bonded to the hull and the engine bed is reinforced with steel plates.
The lead keel is attached to a moulded extension beneath the boat using 20mm diameter stainless steel bolts.
The GRP rudder is moulded around a 45mm stainless steel rudder shaft with strengthening arms into the rudder blade, operated by a stainless steel wheel on a steering pedestal.
Rudder shaft bearings are of stainless steel with deldrinium glide-pieces.
The standard hull is white with a blue waterline, with a dark blue hull and white waterline as an option.
Deck:
The GRP deck is also hand-laid with a balsa-cored sandwich construction providing added strength and good insulation. The hull and the deck are through-bolted and bonded over with hand-laid GRP. The aluminium toerail can be upgraded to teak. The deck surface features a moulded non-slip surface. At the bow, there is a self-draining anchor locker.
A spacious self-draining cockpit has a large full-depth locker on the port side, a second locker to starboard, and cave lockers on both sides for smaller items. The cockpit seats and sole are laid with 11mm solid teak, providing a warm and attractive surface.
32' 7"ft
General Construction:
Hull:
The hull is made of hand-laid GRP with a balsa sandwich above the waterline (remaining solid where shrouds, stays etc. are attached to the hull). Integral longitudinal and transverse beams provide additional strength and rigidity. Structural bulkheads are hand-bonded to the hull and the engine bed is reinforced with steel plates.
The lead keel is attached to a moulded extension beneath the boat using 20mm diameter stainless steel bolts.
The GRP rudder is moulded around a 45mm stainless steel rudder shaft with strengthening arms into the rudder blade, operated by a stainless steel wheel on a steering pedestal.
Rudder shaft bearings are of stainless steel with deldrinium glide-pieces.
The standard hull is white with a blue waterline, with a dark blue hull and white waterline as an option.
Deck:
The GRP deck is also hand-laid with a balsa-cored sandwich construction providing added strength and good insulation. The hull and the deck are through-bolted and bonded over with hand-laid GRP. The aluminium toerail can be upgraded to teak. The deck surface features a moulded non-slip surface. At the bow, there is a self-draining anchor locker.
A spacious self-draining cockpit has a large full-depth locker on the port side, a second locker to starboard, and cave lockers on both sides for smaller items. The cockpit seats and sole are laid with 11mm solid teak, providing a warm and attractive surface.
-
zoom
