Boat engine hourmeter
EH60 Cruzpro

The EH60 is a full featured Engine Hours and Elapsed Trip Time gauge which displays total engine hours and elapsed trip time from 000.0 hours to 9999 hours. A built-in engine hours countdown alarm can be set to warn you to perform needed maintenance such as changing the engine oil or oil filters. When activated the built-in alarm will sound and the display will flash.

The total engine hours can be preset for retrofit to older existing engines. Five levels of backlighting can be selected from the front panel, including OFF and the backlights can be deactivated with a remote switch. All calibration and alarm values are saved to a nonvolatile memory. The EH60 is easy to install with a minimum of only two wires connected to the ignition line and ground.

All constants and calibrations are pre-set during manufacture but you may alter these settings to suit your particular needs. All calibrations and settings are saved to a non-volatile memory that works without power for ten years.

With a press of the button you can display either Total Engine Hours or Elapsed Trip Time.

An engine maintenance alarm can be set using the front panel switches and it will remind you when its time to change the oil, check water levels, etc..

The EH60 draws only 0.018 amps and 5 levels of backlight (including OFF) can be selected from the front panel and is saved to non-volatile memory.