ROV and underwater works equipment

Application: Deployment and recovery of UHD class ROV over side of vessel
Features: · 15 metric tonne Safe Working Load
· Hydraulic actuation of main ...

Application: Deployment and recovery of UHD class ROV for Offshore subsea inspection
and maintenance
Features: · 15 Mt LARS frame ...

Application: Deployment and storage of umbilical cable for Installation and Workover
Control System (IWOCS) in Offshore application
Features: • Radial piston air motor driven
• Two planetary ...

The radiation detector for the VideoRay Pro series ROV mounts easily to the bottom of the sub and utilizes the 9-pin accessory port. A PC is required (connected to the control panel serial port) to read, ...

The ultimate system for maximum efficiency, especially in low-visibility and zero-visibility conditions. The compact size and ultra-wide field-of-view (FOV = 130˚) makes this ...

Plug and Play thin diameter neutrally bouyant tether. ...

The essential elements of an ROV Launch and Recovery System (LARS) are:

An umbilical winch with sufficient capacity to accommodate the maximum length and diameter of ROV umbilical that the system requires. The winch will normally be fitted with a level wind mechanism to ensure even spooling of the umbilical cable onto the winch drum. A hydraulic winch motor is installed in the winch that ...

* Full ocean depth rated
* Brushless motors proving high output torque
* Precise control and positional feedback
* Selectable control via RS232 or RS485
* Robust hard-anodised aluminium body construction
* Easy ...

Saab Seaeye was the first manufacturer to successfully introduce reliable brushless DC motor technology for ROV propulsion and won technology awards for its thruster innovations. Part of this development was ...

These pan & tilt unit are used on a wide range of vehicle sizes from electric inspection class up to the largest cable plough. They provide a rugged and reliable alternative to hydraulic units.
24 Volts DC or 110 Volts AC
Top Mounting Flange ...

This versatile tilt / actuator unit is used on all our small electric ROVs for camera positions but also as a latching actuator in our TMS systems.
24 Volts DC or 110 Volts AC
Top Mounting Flange on Pan ...

Sub-Atlantic's new direct drive range of brushless DC thrusters break new ground in thrust, low weight and enhanced reliability. They are currently available in four sizes, each incorporating Sub-Atlantic's unique StatorshieldTM technology.
- High Reliability, ...

Standard Features

* 92 kW (125 HP) Electro-hydraulic ...

Standard Features

* Docking Head with latch / rotate capability
* Cable ...

Model: IMSV
Category: Mini Probe
Work Capabilities: Sound Velocity Calculation in Water
Operation depth: 2000 Mt
Weight: 4kg
The Ageotec IMSV Mini Sound Velocity Probe and Profiler is a high quality Mini Probe with CTD sensors ...

- High brightness Leds module lamp
- Colour temperature : 6500°K
- ...

Example of application : 2000 msw deep pressure balanced oil filled junction box including AC/DC converter to power ...

Shallow water white LED spotlight - 300 msw depth
For ...

Subsea slope indicator - 4000 msw depth

Subsea pressure balanced oil filled ...

How can all various payloads share the same time underwater? This GIB-USC NTP board is the solution. Synchronized on GPS time, it will re-distribute this accurate time and trigger payloads. Perfectly ...

The GIB-MSC is a miniature ultra stable clock designed to trigger an acoustic equipment. This trigger is synchronized on GPS PPS. This board can be mounted inside an acoustic equipment (pinger, sonar...) pressure housing or inside an ...

GIB-Lite : Underwater GPS made easy

Latest born in the series of "Underwater GPS" products offered by ACSA, the GIB-Lite offers an affordable solution to those users who need accurate sub-sea positioning in a confined area (typically 500 m x 500 m).

By firstly using a smaller, lighter buoy, and secondly by combining some deck box electronics into the antenna assembly, ACSA has ...

SUCTION-CUP PUMP FOR ROVS

Reversible pump ...

CxFLH 1000 FLASH HOUSING

Housing ...

Housing for HDHC1 camcorders on ROVs.
By permitting ...

The Type III tether management system (TMS) uses the latest PSS tether path geometry and has high capacity, simple tether
route, tether load sensing and proportional speed control. It is suitable for ...

The Type IV Tether Management System (TMS) has been specially developed to provide an ultra-compact and weightefficient solution. Although it is smaller and lighter than any other current production TMS there is no compromise in ...

The Type V Tether Management System (TMS) has been developed to provide a compact and weight-efficient solution with
high tether capacity. Although it is smaller and lighter than any other current production TMS there is no compromise ...