|
|
|
|
8.55 m
28' 1"
|
|
|
LOA: 9,35 m
L,hull: 8,55 m
BOA: 2,70 m
B,hull: 2,56 m
Dry weight: ca. 3 000 kg
Engine: 315 %u2013 840 Hk
Fueltank: ca. 400 L
Speed: 40 knop
|
|
|
|
8.84 m
29' 0"
|
|
|
|
Built from our Powered Barge platform, the LINE HAULER SERIES was designed specifically for ship dockingoperations. Its modified “V” hull design, low profile, flat deck and recessed cockpit allow the operator to travel to the worksite quickly, maneuver in low clearance areas and transport heavy loads effectively. The Line Hauler is an excellent example of the innovative approach the Workskiff Team takes to meeting our client’s specific needs.
|
|
|
|
9.14 m
30' 0"
|
|
|
With its large flat deck and modified V hull design, our POWERED BARGE is engineered to balance heavy load operations with speed and maneuverability.
Typically outfitted with a console, T-top or cabin it can be adapted to meet a variety of marine transportation needs. Just add a recessed cockpit for low clearance hauling operations or drop the deck down to create a high volume transporter vessel.
|
|
|
|
9.50 m
31' 2"
|
|
|
|
|
|
9.60 m
31' 6"
|
|
|
The latest creation in the Anytec family, the V-shaped hull in combination with a modern superstructure and a RIB, makes Anytec 960 CAB an innovator in aluminium boats. The boat for fast and safe transports in tough conditions - all year. Twin engines give complete control of operation and function. A boat for those wanting professional leisure.
Anytec 960 CAB is a further development of the 950. By using two engines with gears, space is freed behind the cabin. The space can be used for a toilet facility or other use. The front panes are straight and have negative angle, which means less glare and splash. We have given the boat a modern shape by rounding the cabin and superstructure at the front.
|
|
|
|
9.90 m
32' 6"
|
|
|
Rapid reaction outside harbour areas...
Cataglop XL has been especially designed to collect up macro-waste and floating hydrocarbons in coastal areas up to 6 nautical miles from the shore, near beaches, rocky areas, cliffs, ...
It has a cruising speed of 6,5 knots.
It collects floating waste, even in difficult to get at areas :
- Solid floating waste (wood, plastics, polystyrene, algae...) are collected in a pivoting basket which is automatically emptied into an on board container
- Liquid floating waste (oils and hydrocarbons) are stored floating in a separator tank, without any emulsion, and transfered to earth with a motorized pump
Strong points
- Its cruising speed allows a daily work on several areas (harbours, beaches, cliffs...)
- Its storage capacity can be increased thanks to a towed flexible reservoir
- Equiped with removable flexible booms wich increase its operating width
- Fire fighting
- Built in 5083 aluminium
|
|
|
|
10.00 m
32' 10"
|
|
|
The company specialises in the research, development and manufacture of large offshore RIBS. We build boats to supply the Commercial, Military, Authorities, Exploration and Sailing markets. With a wealth of experience we have designed our RIBS to give the very best reliability and support for all sea states.
Using Professionals from Hull Design, GRP & Composites, Shock Mitigation and Power, we are building some of the toughest RIBS on the market today. Ranging from 9-15 Metres (V Offshore & V Ocean). Our boats have been ergonomically designed and are hand built using only the best materials and proven methods available.
|
|
|
|
10.00 m
32' 10"
|
|
|
- Four man console with foot straps & 30 mm heavy duty A4 stainless steel brackets
- 1200 litres fuel tank under the deck with pipe for cleaning
- Sea through water seperator & fuel filter
- A4 stainless steel grab handles on console
- Large waterproof bow locker with aluminium hatch incorporating collision bulkhead
- Well at rear of boat with drain plugs from waterproof compartments
- Heavy duty A4 stainless steel "U" bolts on rear of transom, bow & bow locker
- Marine electrical bilge pimp with efficenty 9000 litres/h
- Rear cargo board to prevent dive bottles, sliding back
- Plastimo Offshore 105 (heavily dampened) compass.
|
|
|
|
10.30 m
33' 10"
|
|
|
Stem Jet is an innovative boat designed on a polyvalent base, which offers the possibility to adapt the boat for various uses: Rescue, Fire Fighting, Research, Anti-pollution.
Besides the other variants already anticipated for the series, STEM’s design department is able to offer a number of personalisations, ideal for people that work on the water, considering safety and practicality.
|
|
|
|
10.50 m
34' 5"
|
|
|
Madera Ribs operate in the most difficult conditions and have proven their worth for professional and military use. We co-operate with our customers to design and implement optimum solutions for their needs. CUSTOM modifications and reinforcements are welcome to meet the requirements of the professional user.
Customers for Madera RIBS Professional and Military Range can be found among:
Special Forces
Law Enforcement
Fast Attack
Coastguard
Oil Safety
Fishery Protection
Offshore Patrol
Search and Rescue
Air Drop
High Speed Rescue
Fire Offshore
|
|
|
|
11.00 m
36' 1"
|
|
|
|
|
|
12.00 m
39' 4"
|
|
|
|
|
|
12.00 m
39' 4"
|
|
|
The company specialises in the research, development and manufacture of large offshore RIBS. We build boats to supply the Commercial, Military, Authorities, Exploration and Sailing markets. With a wealth of experience we have designed our RIBS to give the very best reliability and support for all sea states.
Using Professionals from Hull Design, GRP & Composites, Shock Mitigation and Power, we are building some of the toughest RIBS on the market today. Ranging from 9-15 Metres (V Offshore & V Ocean). Our boats have been ergonomically designed and are hand built using only the best materials and proven methods available.
|
|
|
|
12.30 m
40' 4"
|
|
|
Anytec 1230 CAB - when design, construction and function are at their best. This boat is equipped with twin diesel engines and water jets, resulting in next to limitless possibilities for manoeuvring and travel in shallow waters.
Two big bunks, restroom, shower, and galley with a generous pilot house provide a comfortable life on-board. Anytec 1230 is primarily for leisure use that is a cut above the norm. Nominated for Boat of the Show 2002.
Flybridge for lazy "cruising days" (can also be supplied without flybridge). Bench seat that turns into another bunk. Table that can be raised and lowered. Well-planned pilot house. Plenty of stowage space. After-body that becomes a great outdoor patio in the evening sun.
For the interior we can choose woods such as birch or mahogany with matching textile
Several options such as teak deck, stainless piping, etc. may be ordered above and beyond standard. Fendering is a foam-core protected by rugged UV-resistant fabric
|
|
|
|
14.00 m
45' 11"
|
|
|
|
|
|
15.00 m
49' 3"
|
|
|
|
Barge multiservices out of aluminum uses for the maintenance of the maritime ways naviguables or fluviales.15 m X 4 m, 25 m X 6 m....
|
|
|
|
15.50 m
50' 10"
|
|
|
Small crafts TM-1526 IBC series are designed for offshore working and long range passengers caring f.e. oil platform crews.
TM-1526 3IB Cabine
Specification:
- Length overall - 15,50 m
- Rigid hull length - 14,16 m
- Beam - 4,00 m
- Draft w/o eng. - 1,18 m
- Weigh dry.no eng. - 9200 kg
- Design. displac. - 12,7 m3
- Aver.chamber diam. - 0,57 m
- Person capacity - 16
- Max power - 3x370HP
- Design.speed - 40 kn
- Fuel capacity - 2100 dm3
- Water capacity - 300 dm3
|
|
|
|
15.50 m
50' 10"
|
|
|
|
|
|
16.00 m
52' 6"
|
|
|
A.S. started to built aquaculture catamaran in order to Turkish Fish Farmers. Now we are constructing new vessel for Russian Fish Farm Company. She will be delivered at the end of august. Aquaculture catamaran was designed for multiple uses. Salvage, diving, and research equipments can be fitted on the boat. Her high stability hull can be certificated by all Classes.
We work closely with our clients; we synthesize the clients%u2019 needs for special arrangement features, like machinery choices or operation types.
We can customize our catamaran range for;
-Expedition operations
-Fish and Fish processing operations
-Salvage and Dive assist operations
|
|
|
|
16.00 m
52' 6"
|
|
|
The Vigilante Professional Workboat range is designed specifically to meet the varied challenges presented to workboat operators in the contemporary marketplace. The team, work continuously with customers and suppliers to develop and perfect the finished product.
Vigilante Professional Workboat Range: -
* 10m GRP Pilot Boat
* 10m GRP Survey/Patrol Boat
* 16m Aluminium Survey Catamaran
* 16m Aluminium Crew/Wind Farm Support Catamaran
* 22.5m Aluminium Crew Boat (mono hull)
|
|
|
|
18.00 m
59' 1"
|
|
|
Offshore Oil Spill Recovery Vessel
Offshore oil spill recovery vessel for use with major oil slicks and discharges. Catamar can work efficiently up to force 5 and with a clean up rate of 100 m3/hr continuously.
A turbine creates the flow, sucking in the hydrocarbons.
This flow between the twin hulls of Catamar is towards a tank equipped with a mesh to hold back solid waste.
Storage
For a pollution lower than 50m3 or a degasification, the own storage capacity of CATAMAR is sufficient.
In case of major pollution, recovered hydrocarbons are progressively transferred from the Jumbo25 into a bunker barge sailing behind the Jumbo25 (bunker barge storage capacity: 1000 to 8000 m3 maximum).
200 m3 bladders equipped with an integrated screw pump can be stored on the deck increasing Jumbo's own storage capacity while waiting for the bunker barge to arrive.
Performances
Considering the weather conditions in the working area, CATAMAR performs as follows:
- Beaufort force 3 included : 70000 m 2 cleaned / hour with her arms covering a 10 m width
- From and above Beaufort force 4: 20000 m 2 cleaned / hour on a 3 meter band with
|
|
|
|
18.00 m
59' 1"
|
|
|
FINTRY CarboCAT Multi-Purpose-Vessel
The FINTRY CarboCAT Multi Purpose Vessel (MPV) was developed as a future-oriented ship concept for many different uses at sea. It combines the advantages of innovative carbon fibre composite technology with those of the tried-and-tested catamaran philosophy.
The FINTRY CarboCat offer various advantages over mono-hull such as, for instance lower displacement resistance, higher initial stability and superb seaworthiness. Aparticular feature of FINTRY CarboCATs, however, is the composite structure made of carbon fibres that has been successfully used in commercial shipbuilding for some years.
Thanks to this technology, coupled with the high-quality materials, FINTRY CarboCAT Multi Purpose Vessel sets new quality standards with regard to efficiency and longevity.
The uses of FINTRY CarboCAT MPVs are diverse:
• Pilot | Patrol
• Offshore Wind Farm Support
• Diving | Survey
• Cargo Ferries
• Aquaculture | Fishing
• Pollution Control
• Fire & Rescue Assistance
FINTRY CarboCAT MPVs 18 m | 20 m | 23 m | 38 m (in development)
The copyright for all development of FINTRY catamarans is owned by FINTRY Marine Design AG.
|
|
|
|
19.25 m
63' 2"
|
|
|
|
|
|
50.00 m
164' 1"
|
|
|
|
| ... products without information |
| |
|
|
3.00 m
9' 10"
|
|
|
|
|
|
4.57 m
15' 0"
|
|
|
|
|
|
4.75 m
15' 7"
|
|
|
|
|
|
4.90 m
16' 1"
|
|
|
|
|
|
5.00 m
16' 5"
|
|
|
|
|
|
5.19 m
17' 0"
|
|
|
|
|
|
Other work-boats
