|
|
The CL244 boom cleat allows you to adjust your outhaul whilst sailing to achieve the ideal sail shape and keep ahead of the competition. The tooth design of the cleat allows a quick, positive lock that is easy to release.
The alloy cleat is fitted onto the boom by a strap that allows you to personalise the position, a rubber packing piece accomodates tapered or oval tubes.
We offer 3 sizes of stap to fit most booms, CL111,CL115 and CL134.
The CL111 and CL115 suite booms 110-116mm in circumference.
whilst the CL134 covers booms from 132-136mm circumference.
|
|
|
Simple, durable harness lines. Designed with no swing, precise sizing, and very low-profile styling. Available in 16", 18", 20", 22", 24", 26", 28", 30" lengths.
|
|
|
Adjusting your harness lines has never been so easy. The marine grade stainless steel pulley cleat makes it easy to adjust your line length even while sailing.
|
|
|
The Gaastra harness lines have been tested in every condition without any kind of consideration. Because of the continuos development of these products we are able to offer extremely high resistance and durable harness lines.
|
|
The Quiktune lines are based around a simple V-jam line cleat. They are supplied with Marlow line and high durometer, durable urethane tubing sleeves. The unique V-jam cleat resists fouling by sand, grit and salt for a secure hold and quick adjustment.
Long arms? Short arms? Waist harness? Seat harness? No problem! Quiktune lines are supplied in a generous 24" to 30" configuration, but can easily shorten by trimming the tubing and shifting the stopper knots to what ever min. & max. length you desire
|
|
CL261 - Power Grip 1
Double your pulling power AND take the pain out of pulling smaller ropes. CL261 Power Grip 1 allows you to pull twice as hard compared to using your bare hands. For right or left handed use. The smoothly contoured hand grip area has been voted the most comfortable shape to fit all hand sizes.
Manufactured from high pressure die-cast aluminium for strength and durability.
For two handed use try our CL262.
|
|
|
Tug Handles The plastic handle fits permanently with a knot whereas the Clamcleat can be kept in your pocket and positioned anywhere along the line being pulled. Both enable you to pull at least twice the load compared to wrapping small ropes around your hand.
|
|
– Solid quiverbag for sails, masts, booms, etc.
– Sliding rails
– 20cm extension bag for long masts
– Seperate opening at the back to unload the bag when the bag is strapped onto the car roof
– Heavy duty PVC coated 600d nylon
Sizes:
– 235cm (+20) x 80cm x 40cm
– 260cm (+20) x 80cm x 40cm
|
|
|
Description: The belts for fastening on the roof rack runs through over the masts and under the sails, they are protected from unnecessary creases. Distance of the fastening zippers from ca. 80cm to 140 cm. Removable shoulder carrying belts (none flutter on the car roof), mast bag with 6 subdivided mast compartments and zipper at both ends for simply taking the masts. Equipped completely with robust Zippers.
|
|
|
Expandable ends accommodate a large range of sail sizes, and 2 piece masts. Handles on all expanded ends makes for easy transporting.
|
|
|
Description: Flexible uphaul line by use of rubber band inside.
|
|
|
Join everyone on the US Sailing Team and uphaul with a smile. Take it easy on your back. Everyone who tries it loves it, even beginners. Design has been recently improved.
|
|
Oversized grips for maximum power while up-hauling.
Internal bungy system holds tight to the mast
Oversized EVA grips
|
|
Adjustable inner crown and head measurement
- EEC standards EN 1385
- Size : 54-62 cm
- Weight : 400 g
- Color : dark grey
|
|
|
The all new carbon fibre full face watersports helmet is designed for waterski jumping or jetskiing. It is available in small,medium,large and a range of colours. The Viper helmet only ways 600gs and has a water proof linning for ease of use. This great new light weight full face helmet is used by the current 2005 European jump champion and 2005 world jump bronze medalist, Jason Seels (as photo), he should know what works well with a personal best in the jump event of 70.9m (230ft).
|
|
- High Absorption Closed Cell Foam Inside
- Lightweight Outer Shell
- Designed for Watersports Only
- Internal Adjustment Strap
- Quick Release Chin Closure
- CE Approved -Black Color
|
|
FREESTYLE ADULT
- ASTM/CE approved
- Injected Helmet in ABS
- Adjustable air flow vents
- Double goggle retainer clips
- Ergonomic, hypoallergenic padded liner
- Removable anatomic ear pads
- Adjustable, padded chin strap with quick release buckle
- Comes with a storage/travel bag
- Weight 445G
|
|
FREERIDE ADULT
- ASTM/CE approved
- Injected Helmet in ABS
- Ultra thin outer shell to reduce weight•
- Integrated adjustable air flow vents
- Ergonomic, hypoallergenic padded liner
- Removable ear pads
- Adjustable, padded chin strap with quick release buckle
- Double goggle clip
- Comes with a storage/travel bag
- Weight 510G
|
|
Helmets are a necessary addition to your collection of paddling safety gear and with Yak’s range of light yet highly durable headwear you will be better protected against impacts.
- Stylish, lightweight helmet, CE Approved for impact resistance
- Heat sealed comfortable foam inserts for optimum fit
- Super high impact ABS hard shell
- High density black EPS
- Fully adjustable webbing cradle
|
|
Boom Bag
- Square back end to match boom shapes
- PVC nose and tail protection
- Heavy Duty YKK zippers
|
|
|
|
|
|
|
Ideal for either our Techno or Core boards, the Cruiser is a pure freeride rig, both easy to use and lightweight, a rig that really performs in light to moderate winds. Its modern design gives it a wide wind range despite the absence of cambers. With plenty of sail area down low, it's got plenty of power to get you up and planing easily, with a smooth and steady pull allowing you to get into the harness and footstraps comfortably. With no cams it is easy to manoeuvre during gybes, tacks, and tricks. With its soft response it is a rig that is easy to control and simply fun to ride. The Cruiser comes with a quality mast and wishbone and is excellent value for money. It's ideal for all our freeride boards and for making your runs.
Delivered in a very practical sail bag that includes additional pockets for storing the mast and the mast base, and the possiblity to attach the boom so that it can be carried «all in one».
The rig package includes sail, mast, boom and items mentioned under the heading "Related products" on the left-hand side of this page.
|
|
|
|
|
|
|
In order to support the growth and development of the Techno 293 OD and Hybrid classes, BIC Windsurf developed the One Design Rig package for use specifically by youth sailors on hybrid boards. This rig package has been designed to be raced in the widest wind range possible, representing the best possible compromise between light wind pumping performance and high wind planing performance. The key features of these rigs include:
A huge wind range: from 6 to 30 knots. By tuning the downhaul and outhaul, the sail can be rigged either very full with a tight leech, or very flat with an open leech.
A draft placement at approx. 40% from the front of the sail (freeride sails = 30% / sub-planing sails = 50%), offering the best compromise between lightwind performance and high wind control.
6 batten / 2 cam configuration for the best compromise between weight and performance.
A very stable profile for ease of use and control in the high winds.
A tack strap tensioner for maximum tuning range and power in light winds.
X-Ply reinforcements in critical areas, durable luff pocket material and webbing batten tensioners for ease of use and practicality in a club and racing environment. Though you may not win every race in all wind conditions, the goal of the One Design sails is to make sure that you have the tools to win the regatta!
|
|
|
Ideal for either our Techno or Core boards, the Core is a pure freeride rig, both easy to use and lightweight, a rig that really performs in light to moderate winds. Its modern design gives it a wide wind range despite the absence of cambers. With plenty of sail area down low, it's got plenty of power to get you up and planing easily, with a smooth and steady pull allowing you to get into the harness and footstraps comfortably. With no cams it is easy to manoeuvre during gybes, tacks, and tricks. With its soft response it is a rig that is easy to control and simply fun to ride. The Core comes with a quality mast and wishbone and is excellent value for money.It's ideal for all our freeride boards and for making your runs.
|
|
The energy shield construction helps protect your investment from the sun.
- Reflective energy shield material
- individual compartments
- Quick release buckle end
|
|
|
|
Other windsurf accessories
