The bio sludge with approx 2% total solids (TS) is pumped to the decanter for dewatering. A decanter's normal capacity is around 3.5 m3/h. The bio waste has to be mixed with polymer to create flocculates, so ...
Food waste in-feed stations are freestanding. They are manufactured completely of stainless steel and come with all necessary fittings housed in a suitable framework. The hopper is ...
The average dry solids (DS) content of the shredded and collected waste is around 5-7%. Before it is suitable for disposal at the incinerator, it must reach a final DS of about 20%. To achieve this ...
In the Bio sludge Treatment System all sludge from waste water and food waste is processed. The system is tailor made to secure the interface between liquid and solid sludge before final incineration.
The main target for the bio sludge treatment system ...
Onboard a modern cruise ship a substantial amount of food waste is collected from galleys, pantries and preparation. To align with future requirements, the cruise industry chooses to process food waste onboard.
The smallest in the range of the well-known TeamTec incinerators. The sturdy, compact design and high performance make it an obvious first choice for solving ...
With its sturdy and compact design and high performance the OG400C is one of our most popular models and an obvious first choice for solving the waste treatment onboard ...
Since 1980, Enviro-Pak® models have been proven to have safe, simple, and reliable operation, and our model 600 C/B is built to the same exacting standards.
Top Performance Under Harsh Conditions The Red Fox Environmental Cajun Crusher was specifically engineered to perform under the rigorous demands placed on equipment operating in the marine industry. High performance levels and product dependability demanded of all Red Fox Environmental products are built into every model. The Red Fox Environmental ...
The incinerators in our program are very easy to operate and require a minimum of maintenance.
The annex V of MARPOL 73 regulates the discharge of garbage. It is much easier to comply with the regulations if you install an incinerator that really works ...
Solid wastes are fed into the incinerator through the garbage door and incinerator is then switched on. For the combustion of pumpable waste, the homogenizer (L) positioned on the sludge service tank, has to be started up, after the neccessary water setting and drainge. ...
The Pyrall PR is a static incinerator which functions by pyrolysis, destroying refuse cheaply and efficiently tanks to the special shape of its combustion chamber and the forced air system adopted. The Pyrall PR handles urban refuse ...
