Fluid heaters, Ship heat exchangers

Electric flow-through heater, vertical or horizontal installation
Marine ...

General

Electrical flow-through preheater, horizontal installation
Designed for marine applications.
Flexible design ...

General

Shell and tube design with small diameter U-tubes
Marine and industrial applications with fluids such as steam, fresh or treated water, ...

Plate coil type gas cooler is the direct/alternative/counter flow thermal exchanger which prevents both fluids from mixing by combining multiple plate coils, which have flow paths in their insides ...

Plate thermal exchanger is composed of multiple corrugated multiple electric heating panels hanging between ...

Oblong Plate & Shell thermal exchanger is a product supplementing strong points of plate thermal exchanger and weak points of multi-tube type thermal ...

The new NX series represents the latest step forward for clean, low viscosity media in high pressure applications. It delivers temperature approaches down to 1°F with fewer plates and a single pass design. It is used primarily in HVAC applications and performs well in other applications with the same conditions:

...

The NC Series gasketed plate heat exchanger is independently certified as part of the AHRI400 certification program by ...

With its NT range GEA Ecoflex has successfully implemented the results of its innovative research onto the market. This new generation of plates sets economic standards, and is distinguished ...

Bowman Exhaust Gas Heat Exchangers are designed to remove heat from the exhaust ...

Bowman fuel coolers are designed for cooling fuel on marine engines. They have cupro-nickel ...

Bowman Marine Heat Exchangers.

There are three methods employed for water-cooled marine petrol and diesel engines: direct, heat ...

Circulating pumps are used in all for forced circulation ...

General
Electrically heating elements are arranged centrically in a pipe system, and heated oil will flow parallel. The ...

General
GESAB-HTI Exhaust Gas Heaters, heated by waste gases from the vessels's ...

Thermex Shell and Tube Charge Air Coolers utilise uniquely enhanced internal ...

Exhaust Gas Heat Exchangers

* Exhaust gas cooling and ...

Copper Shell Heat Exchangers

* Water to water applications for fluids not compatible with aluminium.
...

GEA Bloksma has a long history in tailor made components for charge air ...

The GEA Bloksma oil & water heater V-type is a compact heat exchanger ...

A Box Cooler is a cooling system which finds growing application both for inland and sea going ships.

The unique characteristic ...

Applicable material.
Titanium, SUS304&316, Hastelloy








The Plate Cooler is the most simple structure heat exchanger, it consists of the thin plate with attached rubber gasket and ...

Feature

-Applicable CODE
Every nation's CODE including ABS, LR, DNV, GL, BV, KR, NK, RINA
- Applicable material.
CARBON STEEL, SUS, TITANIUM, CU-ALLOY
-Max. manufacturing condition.
Weight : 200Ton, Length : 40m, Out diameter : 4.5m

We are specialized at manufacturing various ...

▣ Simple, Compact Design
▣ Titanium Heat Exchanger Plates & Other
Sea Water Resistant Materials
▣ Combined Condenser Cooling And Ejector Water
System
▣ Fresh Water Pump & Control System

LNG carrier uses boil off gas as driving force of main boiler during ...

The SUPERMAX® shell & plate heat exchanger is designed for pressures to 70 barg (1,015 psig) ...

PLATECOIL® Prime Surface Heat Exchangers are fabricated from two metal sheets, one or both of which are embossed. When welded together, the embossings form a series of well-defined ...

The plate and frame heat exchanger is designed to provide maximum efficiency in transferring heat from one liquid to another, or from steam to liquid. The heat exchanger consists of a series ...