Bilge water treatment for ships

Purification or clarification of distillates, marine diesel oils, intermediate and heavy fuel oils, and lubricating oils used in marine installations and power stations.

The MOPX separation ...

The MIB 303 separator features a new design concept for solid-bowl separators. Advanced manufacturing, design and drive technologies have contributed ...

is a fully automated centrifugal bilge water treatment system that cleans oily wastewater onboard vessels ...

The new bilgewater treatment system with the Westfalia Separator minimaXx separator type WTC was specially designed for the rough conditions on board.
The product is fed by the feed pump into the centre of the separator bowl. Within the rotating ...

Every ship, whether it is a container ship, an oil tanker or a freighter, produces bilgewater which poses an acute disposal problem. The IMO (International Maritime Organization) specifies that bilgewater may be discharged into the sea only if its residual oil ...

The product (i.e. oily water) is sucked up from the oily water tank or engine room bilge and fed by the feed pump through the filter and preheater via the feed valve to the separator. During the start-up or ejection program ...

MAHLE Industriefiltration refers to its series of continuously operating bilge water oil separators for maritime use as multiphase emulsion breakers (MPEB).

In an MPEB, both separation phases are located in one pressure vessel. This results in ...

MAHLE Industriefiltration refers to its series of continuously operating bilge water oil separators for maritime use as multiphase emulsion breakers (MPEB). The MPEB-VT has separate pressure vessels for its two separation phases, which is particularly well suited ...

MAHLE MFEB membrane filtration oil separators can be used for separating a wide range of oil/water emulsions. Neither thermal nor chemical additives are required in the process, nor are new contaminants created, such as foams or exhaust ...

The “Ocean Clean” system fulfill the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The “Ocean ...

The “Ocean Clean” system fulfill the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The “Ocean ...

The “Ocean Clean” system fulfill the test specification of a.m. IMO-Resolution more than required. The maximum oil content in the effluent water is less than 5ppm. The “Ocean ...

CJC%u2122 Blue Baleen OilAbsorb 38/100 Multistay is a bilge water polishing system with 8 inserts fitted in two parallel 38/100 housings. On request, the Multistay system is available with more than two housings, custom-made for the application.
...

CJC%u2122 Filter Separators combine fine filtration with water separation all in one unit, with an integrated circulating pump. They are designed for use in applications containing hydraulic oil, diesel fuel, lubrication oil, etc., in which water ingress is a constant or recurrent problem.
...

The CJC%u2122 Blue Baleen Bilge Water Systems are polishing systems, used to absorb oil from bilge water to below 5 ppm.



Based on a unique absorption principle with the specially developed ...

Simple and Effective Bilge Water Treatement Option for Ferries, Work boats, and Cruise Ships
Small, Compact, ...

PureShip Bilge Polishing Solutions

Our revolutionary bilge water treatment solution is relied on by over 300 ships and recommended by responsible harbor and marine authorities by name. Why? Because ...

Our bilge water separator treatment solutions have ...