- Maritime equipment >
- Water, Waste, Emissions and discharge reduction >
- Ship ballast water treatment
Ship ballast water treatment
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
The InvaSave system is a one-step treatment process that is able to clean your ballast water wherever and whenever.
The Marex VCS is a fully pneumatic valve control and tank sounding system that combines the fundamentals of AVENTICS technology with modern efficiencies and control. Easy to install and maintain, the Marex VCS is ruggedized for hard-working ...
The BIO-SEA ‘L’ – Low Flow range is particularly well-suited for flow rates ranging from 13 to 120m3/h, ultra-compact, easy to use, reliable and competitively priced. The system components are delivered all-inclusive and can be supplied ...
The BIO-SEA ‘B’-Series offers ship operators with a flow rate requirement of between 100 and 500 m3/h the ideal compromise between cost, performance and reliability. With a standard BIO-SEA ‘B’ design of one lamp per reactor, effective ...
The BIO SEA ‘M’- series is a ballast water treatment system that delivers the highest flow rate capacity from a compact, low-height unit with multiple UV-C lamps contained within a single reactor. This system is suitable for container ...
ERMA FIRST FIT BTWS incorporates the most reliable and efficient filtration followed by a state-of-the-art disinfection stage. Filtration takes place in either 40 microns automatic backwashing filters. The disinfection stage takes place ...
GloEn-Patrol™ is a combined treatment system taking advantage of Filtration and UV irradiation, the most environmentally friendly and optimally designed solution for every kind of vessel to install and operate.Adopting a 100% physical ...
Effective disinfection of harmful aquatic organism Component concept for stabilized capacity expansion Less power consumption Low maintenance cost Simple operating system Automatic back flushing in the filtration unit Automatic ...
The latest version of the Cathelco BWT system is currently being tested to the ‘live/dead’ standard demanded by the U.S. Coast Guard with the aim of gaining Type Approval by the 3rd Qtr of 2017. The Evolution system will supersede the ...
Alfa Laval PureBallast 3 is the third generation of the leading ballast water treatment technology – and the first solution to be revised G8 ready. It offers unmatched performance in all waters, fresh, brackish and marine. Over 1,700 ...
HiBallast is a side stream system combined with filter and electrolysis unit. lt provides an ex-cellent disinfecting efficiency and easy installation on any vessel type without harming the ship, ballast tank coating, the crew, and the ...
HiBallast is a disinfection system by electrolysis of seawater with the following characteristics:• Components: Filter, Electrolysis Unit, Neutralization Unit, TRO Sensing Unit• Required Sea Water Capacity for Electrolysis: only 1% of ...
HYUNDAI HEAVY INDUSTRIES
Compact Ballast Water Management System Looking for a ballast water management system that can be installed easily and without relocating other equipment? CompactClean is the answer. DESMI CompactClean system is based on filtration ...
Desmi
cienco/FAST is extremely proud to offer this new second generation, no filter BWT technology with extensive development, documentation and thorough treatment process for the vessel to remain InCompliance™. The Scienco® InTank™ Ballast ...
OceanGuard™ adopts AEOP (Advanced Electrocatalysis Oxidation Process) OceanGuard™ BWMS adopts Advanced Electrocatalysis Oxidation Process (AEOP) to kill microbes, bacteria, viruses and dormant ovum in water by using special semiconductor ...
The ballast water management convention will soon go in force. According to the IMO MEPC requirements, any member states' vessels with international navigation certificate---newly built ships and operational ships should be equipped with ...
Steel Tank Vent Check Valve – Type RM Sizes: DN40 – DN450 Flange connection standard: DIN 2576 PN10 Hot dip galvanized as well as painted on the inside. Type Approval. Options: – Other flange connections – Other flange hole pattern
Winel B.V.
Daniamant Electronics has developed a Salinometer SL8040 for Ballast Water Treatment systems. SL8040 has DNV-GL Type Approval. We are aslo able to offer tailormade solutions. Major Benefits Salinity Monitor for Seawater Measuring ...
Your suggestions for improvement:
Receive regular updates on this section.
Please refer to our Privacy Policy for details on how NauticExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- AboutVirtualExpo Group
Please specify:
Help us improve:
remaining