Boat hydraulic equipment : Pumps, Hydraulic cylinders...

77 companies | 374 products
Filters
  • What’s new?
    Submit

(This isnt your fathers hydraulic system.) Given any combination of independent shipboard hydraulic systems, NAIAD routinely designs a single well-configured package to provide hydraulic power, hydraulic fluid filtration, and system...

Naiad designed Hydraulic Power Packs contain everything required to supply hydraulic power independent of the main engines.
Each Power Pack contains one or two...

{{productDetail[25361]}}

Description:

It is the simplest model with the inlets and outlets located on the base of the opposite side of the drive shaft.

• Inlets and outlets diameter 0 = 4 mm and center distance of 15 mm
•...

Description

The model has 2 additional intakes (1 for each direction of rotation), located on the inside of the pump body.
The typical application is to feed a cylinder with inner rod: when the cylinder is operating, the pump first takes the volume into the other chamber, then,...

Description:

Rotary oil-pressure piston with electric...

{{productDetail[32896]}}

As an integral part of BESI´s flow management systems, Control Systems for Remote Controlled Valves (RCV), Tank Level Gauging (TLV) and Anti Heeling System (AHS) are offered.
Control Stations

BESI designs and produces centralized and decentralized control...

BESI Quick Closing Valves are designed with multiple execution release cylinders, which allow operation by manual (pulling wire), pneumatic and hydraulic execution. The BESI Quick Closing Valve...

{{productDetail[30802]}}

AutoNav’s New Type P Electrohydraulic Steering System is Superior in Design, Operation and Reliability. A pair of double acting...

AutoNav’s New Type P Electrohydraulic Steering System is Superior in Design, Operation and Reliability. A pair of double acting...

This pumpset servo drive, designed to eliminate steering system shock while ensuring accurate control, results in great extension of motor brush life. AutoNav offers...

Floating Pintle, design for smooth, easy operation.
Minimum wheel effort due to reduced friction.
Reduced wheel slippage due to finer machining tolerance.
Spill valve for rapid filling and elimination of pressure locking (stiffness in wheel).
Cartridge valve design allows on-board...

The smaller 1 1/4" and 1 1/2" models have hard black anodized aluminum construction for corrosion resistance and lightweight. The larger 2" and 3" models utilize brass and bronze material....

{{productDetail[21523]}}

Item list

Can be mounted for different angle positions.
...

{{productDetail[23406]}}

Tackle system operated by a push-pull hydraulic cylinder. It was designed mainly for the control of sheets (main and genoa), but it may be used for other running rigging (runners) as well. The device is made...

Hydraulic cylinder with spherical fulcrum

It is an innovative evolution of the standard hydraulic cylinder. It...

It is an innovative evolution of the standard hydraulic stay tensioning cylinder. It makes use of a special spherical anchoring system to be fitted through deck, thus allowing...

hydraulic cylinder for mainsheet traveler

BCPTB,...

Thanks to our multi-year experience and continuous research, we created Bamar high quality and long lasting cylinder line. Bamar standard cylinder line is manufactured with...

{{productDetail[22245]}}
{{productDetail[24801]}}

The system is designed for remote control of pneumatic, hydraulic, electro-hydraulic, or electrically operated valves as well as pumps used in ballast, bilge, fuel oil, and liquid cargo systems.

The state of the art PLC unit HOMIP provides the signal hub between all process components and control...

{{productDetail[31122]}}

This compact tube-mount cylinder is capable of handling up to twin 150HP engines (counter-rotating) or a single 235HP with comfort. It attaches directly to the outboard motor’s tilt-tube just like the old push-pull cable steering! It also attaches...

A very popular cylinder type for outboards is the HyDrive tube-mount or side-mount 210T (balanced) and 210TSE (unbalanced). It can handle the same horsepower as the powerful 210BH...

This cylinder attaches directly to the transom shield of Mercruiser sterndrive...

This cylinder bolts to the transom shield of most Volvo sterndrive...

There are several different ways to steer outboard motors, mostly depending on the room available and the design of the individual boats engine well. By far the most popular of our Outboard steering cylinders...

{{productDetail[25346]}}

The remote control systems for pumps and monitors are designed and manufactured...

{{productDetail[36506]}}

The EW provides full follow-up electric wheel control. When the traditional steering wheel is turned the EW produces an analog rudder command signal. The rudder will then follow-up to the position commanded by the movement of the wheel.

Compatible with all Jastram...

This patented hybrid hydraulic / electric unit provides full follow-up digital electric control as well as emergency manual hydraulic control. Under power steering, the steering wheel is turned producing a f rudder command signal the rudder then follows up to the position requested by the wheel. In the event of a power...

Jastram designs and manufactures custom Hydraulic Power Units (HPU) to meet a wide range of requirements. Powerunits are available to meet...

Jastram B Model Actuators are double-acting equal displacement cylinders which are directly connected to a tiller. Designed for continuous duty operations for the marine...

Jastram S Model Actuators are specifically certified for use in commercial marine hydraulic steering systems. Their...

{{productDetail[24931]}}

The Mavi Deniz power packs supply the hydraulic power required to use the boom reels, winches,...

The Mavi Deniz power packs supply the hydraulic power required to use the boom reels, winches,...

The Mavi Deniz power packs supply the hydraulic power required to use the boom reels, winches,...

{{productDetail[32743]}}

Navtec stainless steel cylinders represent the highest standard...

The Navtec Rotary Pump is designed to...

It is the heart of a Navtec hydraulic system, putting the operator in complete...

The System VIII panel incorporates new Cam Valve technology, developed by Navtec. Cam...

{{productDetail[21929]}}

ARCHER™ - (Advanced Ride Control High Speed Extendable Retractable) - provides pitch, roll and trim control for high speed yachts using retractable...

The hydraulic power unit provides the fluid power necessary to articulate the stabilizer fins.
Quantum power units can be paired with a variety of stabilizer hull unit sizes and quantities
based...

The hydraulic power unit provides the fluid power necessary to articulate the stabilizer fins.
Quantum power units can be paired with a variety of stabilizer hull unit sizes and quantities
based...


The hydraulic power unit provides the fluid power necessary to articulate the stabilizer fins.
Quantum power units can be paired with a variety of stabilizer hull unit sizes and quantities
based...


The hydraulic power unit provides the fluid power necessary to articulate the stabilizer fins.
Quantum power units can be paired with a variety of stabilizer hull unit sizes and quantities
based...

{{productDetail[23380]}}

The A Series solenoid valve gives you a highly adaptable design for practically all applications requiring flow between CV 0.019 and 0.300. This robust...

The B Series is a direct acting solenoid valve, available in 2- or 3-way functionality. Like all of our valves, the B Series has bubble tight...

The C Series solenoid valve, available only in brass, is a highy durable miniature 2- or 3-way direct acting valve for applications...

For maximum flow in a miniature solenoid valve the D Series valves deliver a wide range of CV values and maximum operating pressures. The D Series...

A 2- or 3-way sub-miniature solenoid valve that delivers faster response times -- and higher flow rates, the...

{{productDetail[32816]}}

Built-in lock valve for positive rudder lock
Integral relief valve for over-pressure protection
3/4" tapered...

Available in five different displacement sizes
UP25F and UP33 F models are also available without built-in lock...

Available in four different displacement sizes
Compact design
Ball bearing piston race
Built-in lock valve for positive rudder lock
Integral...

UC94-OBF - Balanced: the number of turns lock-to-lock is...

UC128-OBF - Balanced: the number of turns lock-to-lock is equal port to starboard...

{{productDetail[21565]}}

The MITTO steering cilinders are available in four different displacement sizes.

Made of an aluminium anodized liner and chromium plated stem,...

{{productDetail[37808]}}

Few can match the hydraulic design characteristic of the WESMAR Hydraulic packages. Quiet, reliable, and state of the art are just a few buzz words that come to mind. WESMAR's hydraulic system comes fully documented including drawings both isometric and schematic for all levels of hydraulic support...

{{productDetail[24994]}}

Comprising:

* pump
* motor
...

{{productDetail[23288]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With NauticExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation