|
|
Are included : The mounting panel for boats, the mounting screws, the LEDs or neon and the common bus bar. The circuit breakers are supplied separately dependently of their calibration (see reference).
|
|
| Quick "slow burn" hydraulic magnetic circuit breakers offer protection when using direct currents. In over current situations they will trip, break the circuit and protect the marine equipment, they may be reset manually and are suitable up to 80 Vdc. |
|
Single-pole, triple-throw switch permits four connection modes: Battery One, Battery Two, two boat batteries in parallel, or both off. Rated for 230 amps continuous, 345 amps momentary. For 6-volt to 32-volt systems. Includes alternator field circuit disconnect to prevent surges. Selector has positive click positions. Bakelite housing with copper washers, brass terminals for boats, and brass nuts. Install with #10 screws.
|
|
NAVYLEC NL101
ATC FUSE/SWITCH FOR BOAT PANELS FOR BOATS
Switchboard ATC fuse holder
Sizes :
1-way : W.140 x H.40mm
2-way : W.140 x H.60mm
3-way : W.140 x H.80mm
4-way : W.140 x H.100mm
5-way : W.140 x H.120mm
6-way : W.140 x H.140mm
7-way : W.140 x H.160mm
8-way : W.140 x H.180mm
Panels from 1 to 8 ways
12 or 24Vdc
Caliber of snap marine fuses up to 10A
Single pole
Compact size
Functions labels
Circuit LEDs status
Faston connectors for boats
Aluminium front panel
Anticorrosion treatment
Using voltage in 12 or 24Vdc.
Front panel in aluminium, black epoxy paint for boat protected, white and yellow serigraphy NAVYLEC.
Distribution circuit, snap fuses protected, interchangeable, maximum size 10A by way.
Printed circuit marine varnish protected.
Easy Connection by faston connectors Input / Output.
Switch On/Off by way with serigraphy 0/1.
Green LED for monitoring the circuit status in operation or not and the fuse state.
Each way has a window that can receive standard labels for the names of customizable functions or on the web site www.navylec.com |
|
NAVYLEC NL103
ELECTRIC SWITCHBOARDS
With switching, control and electronic protection of the electric consumers.
Serigraphy backlighting.
Sizes
1-way : W.140 x H.40mm
2-way : W.140 x H.60mm
3-way : W.140 x H.80mm
4-way : W.140 x H.100mm
5-way : W.140 x H.120mm
6-way : W.140 x H.140mm
7-way : W.140 x H.160mm
8-way : W.140 x H.180mm
9-way : W.140 x H.200mm
Panels for boats from 1 to 9 ways 12 or 24Vdc
Programmable fuse 1 to 8A by Mosfet with control and electronic protection
State control of consumers
Automatic rearmament
Serigraphy and labels backlighting
State marine indicators by LED
Allows a large surge current
Waterproof front panel
Compact size
Backlighting by long life electroluminescent sailboat lamp.
Distribution circuit protected by automatically resetting programmable fuse from 1 to 8Amps with electronic control.
System Switching by MOSFET technology extremely robust and wear resistant.
Touch-switch on/off allowing 3 million cycles.
The allowed surge current for each way can be 6 times the setting value. This panel is particularly suitable for the control of marine pumps and fridges.
Easy Connection by faston connectors for boats on Input / Output.
Green LED indicating activation of the circuit
Red LED indicating that the electronic fuse is open (overload or short circuit)
Flashing red LED indicating that all or part of the load connected is in fault. Current threshold programmable for each output independently.
Interchangeable labels.
|
|
NAVYLEC NL102
ELECTRONIC FUSE/SWITCH FOR BOAT PANELS FOR BOATS
Switchboard with automatic fuse rearmament
Sizes :
2-way : W.140 x H.60mm
3-way : W.140 x H.80mm
4-way : W.140 x H.100mm
5-way : W.140 x H.120mm
6-way : W.140 x H.140mm
Panels from 2 to 6 ways
12 or 24Vdc
Electronic boat fuses 5 and 10Amp
Automatic rearrmament
Functions labels
Status and fuse defect LEDs
Faston connections
Aluminium front panel
Anticorrosion treatment
Compact size
Using voltage in 12 or 24Vdc.
Front panel in aluminium, black epoxy paint for boats protected, white and yellow serigraphy NAVYLEC.
Circuit distribution electronic fuse protected by automatic restart .
Electronic fuses calibre 5 and 10Amp
Printed circuit boat varnish protected.
Easy Connection by faston marine connectors Input / Output.
Switch On/Off by way with serigraphy 0/1.
Green LED for monitoring the circuit status in operation or not and the fuse state.
Red LED indicating that the electronic fuse is open (overload or short-circuit), turns off auto-resetting fuse electronic
Each way has a window that can receive standard labels for the names of customizable functions or on the web site www.navylec.com
|
|
For installation of a fused marine electrical system. Sturdy, bakelite panel for boats with metal on/off marine toggle marine switches. 12 volts D.C. only. Each switch rated at 5 amps. Fuse holders include 1/4" x 1-1/4", 5-amp marine fuses. Fuses are bridged to a single hot feed connection.
|
|
The yacht of your dreams is a personal choice, fitted with the finest materials and marine equipment available.
Nothing should be left to chance, least of all your electrical system. If you want the convenience of an electrical panel for boats controlling all functions on board for boats, a MasterVision modular electrical switchboard is the ideal solution. With over 250 different modules and components to choose from, assembling a tailor-made electrical switchboard couldn’t be easier: ask the shipyard/installer or do it yourself.
Please use the Mastervolt Panel Puzzle to set up your own electrical switchboard. This puzzle can be downloaded here. |
|
| The electro-hydraulic power unit with solenoid valves is mainly composed by an electric motor for boat, an marine hydraulic pump, a boat tank, some valves that are electro-magnetically actuated and a built-in relief valve. For the choice of the most suitable unit it's important to make sure that electro-hydraulic power unit's capacity is proportionate to the steering cylinder's volume. |
|
ELECTROHYDRAULIC TELEPHONES EXCHANGE FOR ENSLAVEMENT
The range of the electrohydraulic telephones exchange for autopilot BCS is truly much wide in order to satisfy grandissima a variety of applications. Our telephones exchange not only represent an interface for the connection of the autopilot, but important characteristics have some that they render the system timoneria anchor for boat simpler to install and to use. The first important advantage is what such telephones exchange can be endowed of a filling system automatic rifle. Therefore, the eventual ones added of oil will have to be carried out directly from the tank of the same telephone exchange, thus avoiding to soil plancia and the flying-bridge. Moreover, the annoying procedure of the clearing of the air from the system is not more necessary, as it comes automatically carried out from the electrohydraulic telephone exchange as the hydraulic oil circulates in the pipages. The range of electrohydraulic telephones exchange BCS is subdivided in two main series: the series of the telephones exchange with valves solenoids and that of the reversible units. For the choice of the suitable article pack-saddles to only say that in the majority of the applications it comes advised to the installation of a telephone exchange with valves solenoids, as generally more reliable. One prefers instead a reversible telephone exchange for all those applications in which express it is demanded and when absorption problems are introduced, like as an example on the sail boats. |
|
REVERSIBLE ELECTRO-HYDRAULIC MARINE POWER UNITS
The reversible electro-hydraulic power unit is mainly composed by a reversible electric motor for boat, an marine hydraulic pump, a boat tank and a built-in relief valve. During the choice of the unit it's important to remember that a power unit belonging to this series can only be fitted together with the so-called 'balanced' or 'symmetric' steering cylinders, in other words, those cylinders with a passing-through rod. |
|
| ... products without information |
| |
|
|
Panels, Circuit-breakers, Plugs, Switches...
