|
|
| To control cylinders and boomvangs with one central pump for boat, Holmatro offers conveniently arranged and easy-to-use control panels for boats. They are suitable for control of up to 4 different functions. A push button control panel with a separate and extremely compact electric-hydraulic pump is also available. |
|
| The new CARITEC complete set for hydraulic system manual control has been developed and tested for Open 60 boat trimarans and America's Cup yachts, therefore they are very high performance and extremely reliable products, working up to 700 bar (10000 psi) pressure, thus minimising size and weight. A complete set of manual valves and fittings is available. The alternate pump for boats is available in single speed or two speed with auto shift model; and we can also propose the rotating model, powered by an universal sailboat winch handle. For maximum power the new marine pedestal pump, driven by coffee grinder is now available. Gauges are designed for easy and quick reading thanks to the coloured sectors, and made of ABS for lightweight. The whole set is made of black hard coated 7075-T651 aluminium. Marine panels are available also in stainless steel, Titanium, or in hi-tech carbon fiber. |
|
FOR REMOTE CONTROL OF CYLINDERS, INCLUDING VANGS, SAILTEC MARINE PANELS OFFER THE MOST POWER FOR THEIR SIZE AND WEIGHT.
SAILTEC panels control up to four functions per panel. Backstay cylinders, vangs, outhauls and forestay cylinders can be pumped to 5,000 psi (350 bar) and released from the panel location.
|
|
| By adjusting the backstay tension, you can increase boat speed and point higher. Genoa furling becomes a lot easier. Holmatro® integral marine adjusters enable you to alter the backstay tension accurately and quickly. These backstay adjusters are made of lightweight aluminium and have an integrated two-speed pump for boat. |
|
The hydraulic single-acting cylinders are available in many models ready in stock or with very quick delivery. Our technical office can design new custom models in short times. Hi-tech materials and advanced design for top performance, reliability and lightweight. Black hard coated aluminium
(6082 or 7075) for cylinder tube and boat terminals, Nitronic 50 stainless steel for piston rod and 17-4-PH stainless steel for pins for boats. Titanium for standard extralight cylinders. |
|
As boats get bigger and headstays longer, both easy adjustment and accurate backstay tension become increasingly important. The solution to this is hydraulics.
A hydraulically controlled backstay permits quick adjustment of headstay sag and marine mast bend which can make boats sail faster, point higher and make furling and reefing much easier.
|
|
Using proven hydraulic technology, Bennett Hatch Lifter Systems raise hatches at the push of a button. The operation is quiet, smooth and responsive with no cylinder drift.
Retrofit Hatch Lifting Systems can be operated by the Trim Tab Hydraulic Marine power unit. Kits for boats are complete with all necessary hardware, tubing and fittings for simple Hatch Lifter installations. Independent Systems include the Trim Tab Hydraulic Power Unit. Independent Dual Acting Systems also available for applications that need a return "pull and hold" feature.
Hatch Lifter cylinder features:
* Single cylinder has about 250 lbs. of vertical lifting capability
* ¾-inch diameter stainless steel shaft, inside a black anodized aluminum cylinder
* Standard stroke is 18 inches with 12- and 24-inch strokes also available
* Dual cylinder systems can move simultaneously or independently |
|
| The Model 7033 outboard motor steering cylinder was designed to be attached directly onto the late model outboard motor brackets. The draglink provided is used to connect the cylinder rod onto the motor tiller arm with stainless steel shoulder bolts. |
|
MARINE HYDRAULIC CYLINDERS
Our sailboat steering cylinders are in bronze and steel with stainless steel rod. The ball joint is in steel as well. The cylinder's dody is properly painted to work in a marine environment and can be in different colours on specific request. Each cylinder is supplied with brass fittings in different sizes. ACCESSORIES In the BCS products range there is a wide choice of hydraulic steering accessories, too, such as non return valves, by-passes, relief valves, marine steering wheels, hosing and fittings of any type and seize. Some of our standard models are shown here below. For any further reference about a great number of special configurations for the most various applications our Technical Department can supply any detail about seizes and technical data. |
|
| A very popular cylinder type for outboards is the HyDrive tube-mount or side-mount 210T (balanced) and 210TSE (unbalanced). It can handle the same horsepower as the powerful 210BH Bullhorn cylinder, but it is simpler and cheaper to install. The only restriction to fitting them is the side-clearance requirements in the engine for boat well. Made of chromed brass, bronze and stainless steel, there are two versions available, - the 210T which is a balanced cylinder, and the unbalanced 210TSE which has slightly higher turns one way than the other. It's advantage is that it requires less clearance for installation. They can also be fitted directly to splashwell brackets to replace any cable steering. It's really that simple. |
|
| Introducing the HyDrive Model 212T Sport cylinder which offers the power and reliability of hydraulic steering at prices which are more than competitive with many mechanical systems. This compact tube-mount cylinder is capable of handling up to twin 150HP engines for boats (counter-rotating) or a single 235HP with comfort. It attaches directly to the outboard motor's tilt-tube just like the old push-pull cable steering! It also attaches to Stern-Drives in the same manner, and can be used on Sterndrive Marine power steering cylinders making dual stations very simple. |
|
Arcturus Marine evaluates each boat application individually and configures the hydraulic system to meet the specific needs of your yacht.
|
|
Reliable low noise fixed displacement hydraulic vane marine pumps are supplied standard on NAIAD Models 160, 174, 1018, 252, and 254. Much more efficient than gear pumps, these premium quality pumps are physically small relative to their output power. They easily mount to your main engine for boats, marine gear, or other power source. Rotation, keyed or splined shaft, and SAE A or B flange configurations are in stock to match vessel requirements.
Pressure compensated axial piston pumps of the highest quality are supplied standard on all mid range and larger NAIAD Systems (model 302 and above). These pumps automatically vary flow to match hydraulic demand for high efficiency and minimal power consumption resulting in substantially cooler operating temperatures and long component life. Rotation, keyed or splined shaft, and SAE B or C flange configurations are in stock to match vessel requirements.
All NAIAD pumps may be provided pre-assembled to a highly efficient Totally Enclosed Fan Cooled AC boat electric motor in 50 or 60Hz. These power packages are supplied with a soft starter to minimize inrush current during start-up. Specify sailboat ship’s voltage, phase and frequency. |
|
HYDRAULIC HELMS
The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for boat for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different kits for boats can be found on the price list. |
|
| The hydraulic helms are of the axial pistons type. The helm housing is in aluminium with bronze gears and cylinder block for boat for greater durability and longer life. The P20, P30 and P42 models are supplied with a built-in non return and relief valve. For all the other models a non return valve shall be mounted separately. The hydraulic helms are supplied without any fitting. Complete kit of fittings are available separately, which shall be specified when placing the order. The codes and descriptions of the different boat kits can be found on the price list. |
|
Reliable operation of a steering system depends upon the quality and performance of the helm pump for boat. The Jastram "H" series manually operated helm is a precision made axial piston pump specifically designed to operate effectively at a very slow turning rate.
The H26/36/58 provide excellent primary or backup steering for small and relatively large marine steering systems. |
|
Reliable operation of a steering system depends upon the quality and performance of the helm pump. The Jastram "H" series manually operated helm is a precision made axial piston pump specifically designed to operate effectively at a very slow turning rate.
The H60, 90 and 110 are among the largest helm boat pumps made and provide excellent primary or backup steering for large steering systems for boats. |
|
"No more unprotected hydraulic hoses on the stern. By running the hydraulic hoses through the cylinder brackets we have reduced the risk of hose damage, and there are two less holes to make through the stern bulkhead. In addition, installation is much simpler. Also new is the incorporation of a trim indicator in each cylinder, and this is supplied as standard.
The cylinder kit for boat with built-in indicator will give you full control of the boat's attitude in the water. More powerful cylinders mean that only one per trim tab is required for boats up to 40 feet.
The marine cables from the marine indicators are run to a connector for boats box and then to the indica-tor instrument. There is only one cable from the connector box, which makes connection easier.
Complete kit with boat pump, 2 or 4 cylin-ders, 12V or 24V. Choose black or white instruments."
|
|
A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid marine valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover for boats protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance. Installs easily with sturdy mounting bracket.
Measures 4" x 7 1/2" x 5 1/2". Uses automatic transmission fluid. Includes pump for boat, solenoid valves, reservoir and cover. |
|
| Among all the different marine equipments fitted on board for boat, the trim tab system has a very important role, as it contributes to the boat's stability. It is therefore important to chose the most suitable system, a choice for which some important factors are the type of vessel, its weight and the max. speed. The range of BCS trim tab systems can be divided into two main groups, whose main difference is the type of the tab: it can be both in stainless steel or aluminium alloy. The stainless steel series is normally installed on pleasure yachts that are not very fast |
|
TRIM TABS SYSTEM
Among all the different boat equipments fitted on board for boats, the trim tab system has a very important role, as it contributes to the boat's stability. It is therefore important to chose the most suitable system, a choice for which some important factors are the type of vessel, its weight and the max. speed. The range of BCS trim tab systems can be divided into two main groups, whose main difference is the type of the tab: it can be both in stainless steel or aluminium alloy. The stainless steel series is normally installed on pleasure yachts that are not very fast |
|
| High bow on take-off, pounding, porpoising, and excessive use of the engine for boats's power trim are factors reducing the efficiency of high performance sailboat fishing boats. You may also find yourself needing a high throttle setting just to stay on plane. With a unique Batwing design and a high-tech black powder-coated finish, Tournament Tabs are engineered to fit your small boat. They increase stability, versatility and overall performance, helping your boat run on plane in shallow water - even at slower speeds. Tournament Tabs are hydraulically adjustable, putting total attitude control at your fingertips. Includes Euro-Style Rocker Switch for boat Control. |
|
| The Sport Tab series (ST9, ST12 and ST16) is engineered for the demands of offshore attitude correction over a wide range of water conditions. For speeds up to 60 mph. Features two heavy duty stainless steel tabs with powder-coated black finish, secured with heavy duty mounting plates and marine fasteners. The ST12 and ST16 Sport Tabs are deflected and held firmly in position by dual actuators on each tab. Kit for boat also includes hydraulic power unit, and all necessary wiring, tubing and hardware. Includes Euro-Style Rocker Switch for boat Control. |
|
| Bennett's M80 and M120 Sport Tabs are ideal for trailered boats in the 17' - 23' range. Their unique Batwing design provides 30% more lift for boats than conventional trim tabs and their space-saving design ensures easy installation on virtually any transom. Trim tab boat kits include two stainless steel trim tabs, two actuators, a hydraulic power unit, all necessary wiring, tubing, hardware and installation video. Includes Euro-Style Rocker Switch Control. |
|
SST System - The Ultimate in Brawn & Beauty
A comprehensive trimming system that meets the demands of the 50-foot (16-meter) to 150-foot (46-meter) large yatch market. Each SST System includes:
* Single or dual 304 stainless steel actuators, single or dual acting (with no external lines)
* 7-gauge, 304 stainless steel, heavy duty trim planes, with an exclusive interlocking 10-gauge hinge
* Two high-pressure, compact hydraulic marine power units, either single acting or dual acting marine pumps
* Choice of three indication systems, all with internal sensors - including the popular three-in-one Electronic Indicator for boat Control (EIC5000)
* Auto Tab Retractor
* Euro-Style Rocker Switch for boats Control (ES2000)[if Electronic Indicator Control is not selected] |
|
|
|