|
|
|
BUKH DV ge-sets can be supplied with flexible or double-flexible mountings on a welded steel frame with marine or industrial generators, with two bearings or flanged-on with one bearing.
|
|
14.5 ekW (18.1 kV•A) at 1800 rpm 60 Hz
12.0 ekW (15.0 kV•A) at 1500 rpm 50 Hz
@1.0pf
13.5 ekW (13.5 kV•A) at 1800 rpm 60 Hz
11.0 ekW (11.0 kV•A) at 1500 rpm 50 Hz
Specifications
Configurations
In-line 3 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke 84 mm (3.31 in) x 90 mm (3.5 in)
Displacement 1.5 L (91 cu in)
Governor Mechanical
Aspiration Naturally Aspirated
LxWxH
Single Phase: Open Set 962 mm x 533 mm x 699 mm
37.4 in x 21 in x 27.5 in
Single Phase: Enclosed Set 1021 mm x 608 mm x 710 mm
40 in x 24 in x 28 in
3 Phase: Open Set 1065 mm x 504 mm x 733 mm
41.9 in x 19.8 in x 28.7 in
3 Phase: Enclosed Set 1170 mm x 504 mm x 733 mm
46 in x 24 in x 30.8 in
Weight (Approx. dry) 319/412 kg (703/908 lb)
|
|
21.0 ekW (26.0 kV•A) at 1800 rpm 60 Hz
17.5 ekW (22.0 kV•A) at 1500 rpm 50 Hz
@1.0pf
21.5 ekW (21.5 kV•A) at 1800 rpm 60 Hz
18.0 ekW (18.0 kV•A) at 1500 rpm 50 Hz
Specifications
Configurations
In-line 4 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke 84 mm (3.31 in) x 100 mm (3.94 in)
Displacement 2.2 L (135 cu in)
Governor Mechanical
Aspiration Naturally Aspirated/Turbocharged
LxWxH
Open Set 1147 mm x 521 mm x 825 mm
45 in x 20.5 in x 32 in
Enclosed Set 1170 mm x 608 mm x 775 mm
46 in x 24 in x 31 in
Weight (Approx. dry) 389/466 kg (857/1027 lb)
|
|
A vessel that needs 16 to 20 kW is large enough that continuous power is critical to its operation. Unfortunately, most sets in this range have small displacement, light duty diesels that can't stand up to heavy use. Some even need turbochargers to compensate for their small displacement.
The M844W3 is different. Powered by a naturally aspirated, four cylinder diesel, this set has the low end torque needed to start big electric motors. Yet it weighs under 900 pounds and is compact in size. The M844W3 meets US EPA Tier III emission standards protecting the environment you enjoy.
Vibration isolation mounts, cast air intake manifold and sound maze intake silencer make the set remarkably smooth and quiet. A sound enclosure is available.
|
|
These are the powerhouses that go in vessels that need continuous AC power to operate. Unfortunately, some 20 kW machines have small displacement, light duty diesels that can't stand up to heavy use. Some even need turbochargers to compensate for their small displacement.
The M844LW3 is different. Powered by a naturally aspirated, four cylinder, 2.2 liter (135 cid) Lugger diesel, this set has the low end torque needed to start bigger electric motors without breaking a sweat.
The M844LW3 meets US EPA Tier III emission standards to protect the environment you enjoy.
Vibration isolation mounts, air intake silencer and cast manifolds make the set remarkably smooth and quiet. A high attenuation sound enclosure is optional.
|
|
The M843NW3 is small in size but not in heart.
The M43NW3 comes with all the time-tested features you expect on a Northern Lights. A simple, reliable cooling system that minimizes belts, hoses and gaskets. A relay based DC electrical system without expensive printed circuit boards. Single side service accessibility. Crankcase oil vapor trap system and welded drip pan base to keep your engine room as clean as the 843's white polyurethane paint job.
The 843 also plays well with others. Team it up with a larger Northern Lights set. The 843 will shoulder the light load hours and let its big buddy take a rest. Since it only uses 0.62 gph of fuel at half load it will rest your wallet too.
|
|
|
Cummins Onan Marine Generators are leading the way by offering the most innovative marine generator sets available, making boating simpler. Cummins Onan digital series gensets, which include Quiet Diesel - QD™ models, give you smart power with user-friendly diagnostic information. Our self-monitoring system and flexible network communications bring you a new level of information for worry-free boating�simply smart.
|
|
175 ekW (219 kV•A) at 1800 rpm 60 Hz
215 ekW (269 kV•A) at 1800 rpm 60 Hz
250 ekW (313 kV•A) at 1800 rpm 60 Hz
150 ekW (188 kV•A) at 1500 rpm 50 Hz
175 ekW (219 kV•A) at 1500 rpm 50 Hz
150 ekW (188 kV•A) at 1500 rpm 50 Hz
Specifications
Configurations
In-line 6 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke 112 mm (4.41 in) x 149 mm (5.87 in)
Displacement 8.8 L (538 cu in)
Governor Electronic
Aspiration Turbocharged Aftercooled
LxWxH
Min. 2106 mm x 996.8 mm x 1169 mm
82.9 in x 39.2 in x 46 in
Max. 22166 mm x 996.8 mm x 1169 mm
87.2 in x 39.2 in x 46 in
Weight (approx. dry) 1753-1903 kg (3865-4195 lb)
|
|
Cummins C Power marine gensets offer optimum durability and functionality for primary ship's service and diesel-electric applications. Designed specifically for the challenges of the marine environment, each C Power genset features a Cummins base engine and alternator that are globally recognized for quality standards.
Every major component of a C Power generator set, including the engine, alternator and control system, is either designed and manufactured or integrated by divisions of the Cummins family. This means all elements of the C Power generator set are engineered to operate with complete system harmony for optimal performance and maximum efficiency. Every day. Every time.
|
|
Every major component of a C Safe generator set, including the engine, alternator and control system, is either designed and manufactured or integrated by divisions of the Cummins family. This means all elements of the C Safe generator set are engineered to operate with complete system integration for optimal performance and maximum reliability.
Cummins designed the C Safe generator set and related control systems to be completely independent from other sources and systems on board. C Safe gensets start every time with absolute reliability. So when your vessel
needs power, it's ready to generate. Every emergency. Every time.
|
|
Reliability. Durability. Simplicity.
The M1066 Series marine generator sets are powered by new, US EPA Tier II compliant, Lugger diesel engines. Each generator incorporates new features that add high power density to the Northern Lights reputation for cast-iron reliability, durability, and simplicity.
An important decision.
Whether you are building a new yacht or repowering, your future enjoyment depends on the generator set you choose today. It will run day and night, so smooth, quiet operation, long engine life, and fuel consumption are major considerations. With so much depending on your new set, it pays to choose one that is built up to a high standard of quality; not down to a low price. It pays to choose Northern Lights.
The heritage continues.
Four decades of marine experience stands behind every Northern Lights. Yachtsmen like you have made them standard equipment on yachts from the world's premier builders. Service is handled by our international dealer network and our factory branches.
|
|
Reliability. Durability. Simplicity.
The M1066 Series marine generator sets are powered by new, US EPA Tier II compliant, Lugger diesel engines. Each generator incorporates new features that add high power density to the Northern Lights reputation for cast-iron reliability, durability, and simplicity.
An important decision.
Whether you are building a new yacht or repowering, your future enjoyment depends on the generator set you choose today. It will run day and night, so smooth, quiet operation, long engine life, and fuel consumption are major considerations. With so much depending on your new set, it pays to choose one that is built up to a high standard of quality; not down to a low price. It pays to choose Northern Lights.
The heritage continues.
Four decades of marine experience stands behind every Northern Lights. Yachtsmen like you have made them standard equipment on yachts from the world's premier builders. Service is handled by our international dealer network and our factory branches.
|
|
OSSA Powerlite® generators are the heart of the OSSA Powerlite system. Whether you are creating a full diesel-electric propulsion package or simply powering our accessories, it all starts here. In a world of thousands of generator manufacturers, just how different is OSSA Powerlite? A quick glance at our specifications makes it clear that no one comes close to our technology. OSSA Powerlite generators are smaller and lighter than anyone. Not just a little - A LOT!
Our exceptionally high power density makes it pretty clear just how different OSSA Powerlite technology really is. However, there is more to OSSA Powerlite power than just the specifications. All OSSA Powerlite generators are Propulsion Duty Ratedtm. Propulsion Duty Rated means our generator sets meet the rigorous international requirements established for generators functioning as prime movers in commercial diesel-electric marine installations. It is your assurance that you will get 100% of the rated output hour-after-hour and week-after-week AND have a little extra in reserve for those tight situations.
OSSA Powerlite® generators are available in capacities of 6, 13.5, 25, 50, 100, 150 and 200kW.
|
|
Engine and alternator close-coupled via flexible disc and bellhousing. Generator resiliently mounted on common steel base tray. Seawater circulation pump, heat exchanger, water-cooled exhaust and injection elbow fitted. The engine with forced lubrication system, constant speed governing to BS649 Class A.. Output as per BS649 and DIN 6270. Included
are injection pump, fuel delivery pump, fuel fine filter, oil filter and air cleaner. All control circuits wired into a common terminal box located on the main alternator. Each set factory tested and sprayed in heat resistant paint.
|
|
Engine and alternator close coupled via bellhousing and resiliently mounted. Engine supports raised to achieve low vibration performance. All pipework and electrical wiring on set, Rating as per BS649 and DIN 6270, governing class A2. Failsafe system to provide protection against lack of oil pressure and overheating. Fan for hot air extraction from under the sound enclosure. Each set factory tested and sprayed in blue hammer, heat resistant paint. The sound enclosure is of substantial construction,
combining the best use of GRP and Balsa Wood. Lead sheeting is laminated into the glass fibre structure to improve the acoustic performance. Noise reduction is considerable, bearing in mind the
small dimensions and the low weight. The new cocooned set incorporates all relevant features to simplify installation on board. All services to and from the cocoon have external connections to ease
service access and increase cost effectiveness.
|
|
2200 ekW (2750 kV•A) at 900 rpm 60 Hz
2420 ekW (3025 kV•A) at 900 rpm 60 Hz
2350 ekW (2938 kV•A) at 1000 rpm 50 Hz
2600 ekW (3250 kV•A) at 1000 rpm 50 Hz
Specifications
Configurations
In-line 8 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke 280 mm (11.0 in) x 300 mm (11.8 in)
Displacement 148 L (9031 cu in)
Governor Mechanical
Aspiration Turbocharged Aftercooled
LxWxH (mm) 4511 mm x 1961 mm x 3937 mm
LxWxH (in) 178 in x 77.2 in x 155 in
Weight (Approx. dry) 11340 kg (25000 lb)
|
|
In designing the engines, consideration was given to their intensive use and to the desirability of easy and simple maintenance. These engines feature individual cylinder heads and wide inspection doors in the block, which makes access to the inside parts of the engine easy, and shortens the service time during maintenance and repair processes.
This series comprises six and eight cylinder in-line engines as well as twelve and sixteen cylinder 60º V-bank engines.
- Reliable
- Efficient
- Economic maintenance
- Environmental-friendly
|
|
big power producer in a little package, the Northern Lights M944W3 is ideal for the boater who expects unqualified excellence from his generator set without sacrificing valuable engine room space.
Cranking out 30 kW at 60 Hz (1800 rpm), the M944W3 is intended for long life at full load. At more then 3.33 liters, this four cylinder dynamo has the displacement (203 cid) to shoulder the large loads. The generator is driven by a reliable Lugger engine, drawing its strength from an industrial block designed for 2500 max rpm; not the 3600 rpm automotive engine common in the industry. That is the reason that the M944W3 hits the top of its torque curve at 1800 rpm instead of sliding down the back of it.
|
|
The M864W3 combines ample power, long life features, and low emissions owners expect from a Northern Lights.
Exceptionally smooth, quiet and clean, it makes life aboard comfortable while protecting the environment. The 2.5 liter Lugger diesel has been designed for clean exhaust and meets the US EPA Tier III emission requirements.
Noise is reduced at the design stage with several features. A laminated oil pan and an isolated rocker arm cover contain the noise at its source. A noise maze air intake silencer lowers noise while isolation mounts limit transmission of vibration to the vessel. For even more comfort specify a super attenuated, powder coated sound enclosure.
|
|
|
The Cummins Onan brand is leading the way by offering the most innovative marine generator sets available, making boating simpler. Cummins Onan digital series gensets, which include Quiet Diesel - QD models, give you smart power with user-friendly diagnostic information. Our self-monitoring system and flexible network communications bring you a new level of information for worry-free boating...simply smart.
|
|
In designing the engines, consideration was given to their intensive use and to the desirability of easy and simple maintenance. These engines feature individual cylinder heads and wide inspection doors in the block, which makes access to the inside parts of the engine easy, and shortens the service time during maintenance and repair processes.
This series comprises six and eight cylinder in-line engines as well as twelve and sixteen cylinder 60º V-bank engines.
- Reliable
- Efficient
- Economic maintenance
- Environmental-friendly
|
|
370 ekW (462 kV•A) at 1800 rpm 60 Hz
280 ekW (350 kV•A) at 1500 rpm 50 Hz
Specifications
Configurations
Vee 8 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke 137 mm (5.4 in) x 152 mm (6.0 in)
Displacement 18 L (1099 cu in)
Governor Mechanical
Aspiration Turbocharged Aftercooled
LxWxH (mm) 1458 mm x 1239 mm x 1605 mm
LxWxH (in) 57.4 in x 48.8 in x 63.2 in
Weight (Approx. dry) 3288 kg (7248 lb)
|
|
Cummins C Power marine gensets offer optimum durability and functionality for primary ship's service and diesel-electric applications. Designed specifically for the challenges of the marine environment, each C Power genset features a Cummins base engine and alternator that are globally recognized for quality standards.
Every major component of a C Power generator set, including the engine, alternator and control system, is either designed and manufactured or integrated by divisions of the Cummins family. This means all elements of the C Power generator set are engineered to operate with complete system harmony for optimal performance and maximum efficiency. Every day. Every time.
|
|
40 ekW (50 kV•A) at 1800 rpm 60 Hz
72 ekW (90 kV•A) at 1800 rpm 60 Hz
34 ekW (43 kV•A) at 1500 rpm 50 Hz
60 ekW (75 kV•A) at 1500 rpm 50 Hz
@1.0pf
37 ekW (37 kV•A) at 1800 rpm 60 Hz
32 ekW (32 kV•A) at 1500 rpm 50 Hz
Specifications
Configurations
In-line 4 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke 100 mm (3.94 in) x 127 mm (5.0 in)
Displacement 4.0 L (243 cu in)
Governor Mechanical
Aspiration Naturally Aspirated/Turbocharged
LxWxH (mm) 1394 mm x 735 mm x 1186 mm
LxWxH (in) 54.9 in x 28.9 in x 46.7 in
Weight (Approx. dry) 715-720 kg (1576-1587 lb)
|
|
44 ekW (55 kV•A) at 1800 rpm 60 Hz
58 ekW (720 kV•A) at 1800 rpm 60 Hz
76 ekW (95 kV•A) at 1800 rpm 60 Hz
@1.0pf
38 ekW (47 kV•A) at 1500 rpm 50 Hz
51 ekW (64 kV•A) at 1500 rpm 50 Hz
69 ekW (86 kV•A) at 1500 rpm 50 Hz
86 ekW (107 kV•A) at 1500 rpm 50 Hz
Specifications
Configurations
In-line 3 cylinder
Cycle 4-Stroke-Cycle-Diesel
Bore x Stroke In-line 4 cylinder
Displacement 4.4 L (269 cu in)
Governor Mechanical
Aspiration Naturally Aspirated/Turbocharged
LxWxH
Min. 1409 mm x 724 mm x 1318 mm
55.5 in x 28.5 in x 51.9 in
Max. 1590 mm x 724 mm x 1405 mm
62.6 in x 28.5 in x 55.3 in
Weight (approx. dry) 805-1015 kg (1775-2238 lb)
|
|
OSSA Powerlite® generators are the heart of the OSSA Powerlite system. Whether you are creating a full diesel-electric propulsion package or simply powering our accessories, it all starts here. In a world of thousands of generator manufacturers, just how different is OSSA Powerlite? A quick glance at our specifications makes it clear that no one comes close to our technology. OSSA Powerlite generators are smaller and lighter than anyone. Not just a little - A LOT!
Our exceptionally high power density makes it pretty clear just how different OSSA Powerlite technology really is. However, there is more to OSSA Powerlite power than just the specifications. All OSSA Powerlite generators are Propulsion Duty Ratedtm. Propulsion Duty Rated means our generator sets meet the rigorous international requirements established for generators functioning as prime movers in commercial diesel-electric marine installations. It is your assurance that you will get 100% of the rated output hour-after-hour and week-after-week AND have a little extra in reserve for those tight situations.
OSSA Powerlite® generators are available in capacities of 6, 13.5, 25, 50, 100, 150 and 200kW.
|
|
The M1064 Series marine generator sets are powered by new, US EPA Tier II compliant, Lugger diesels. These sets incorporate many new features that add high power density to the Northern Lights reputation for cast-iron reliability, simplicity and durability.
An important decision.
Whether you're repowering your vessel or building a new yacht, your future enjoyment depends on the generator set you choose today. It will run day and night, so smooth, quiet operation, long engine life, and fuel consumption are major considerations. With so much depending on your new set, it pays to choose one that is built up to a high standard of quality; not down to a low price. It pays to choose Northern Lights.
The heritage continues.
Four decades of marine experience stands behind every Northern Lights. Yachtsmen like you have made them standard equipment on yachts from the world's premier builders. Service is handled by an international dealer group with assistance from factory branches.
Selection without compromise.
Underloaded and overloaded generators cause problems and waste money. With five models from 33 to 99 kW, there is a M1064, 60 Hz or 50 HZ set that is just the right size for your vessel.
|
|
|
|