|
|
|
The VDO Ocean Line ammeter provides an overview of the entire electrical system. The level of current being drawn and the supply current are clearly displayed. The shunt (a measurement resistor) can be inserted into the measurement point in a matter of seconds. The fine equipment wire that runs from the shunt to the indicator is easy to lay without taking up much space.
|
|
Shakespeare Style ART-3 Antenna-Radio Tester
No need to call for a radio check when you have this compact, easy to use, unit on-board. Unlike other meters in its class, the ART-3 tests receiver function as well as output power and VSWR (antenna efficiency). It is powered by an internal battery or can be connected to ships 12 VDC with the supplied power cable. Battery level can be checked at the flip of a switch.
o Frequency Range: 155-158 MHz
o RF Power Scale: 0 to 30 watts
o Impedance: 50 ohms
o Accuracy: 10%
o Connectors: SO-239
o Signal Generator: 3 KHz Deviation
o Tone: 1000 Hz
o RF Level: -115 dBM (approx.)
* Die-cast aluminum construction
|
|
|
|
|
|
|
The high-end voltmeter with LCD display NAVYLEC can measure the voltage of one or more independent batteries in the form of light and use the EL Electroluminescent lighting technology for his serigraphy and the LCD display back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm when it is activated.
LCD precision voltmeter's with electroluminescent back lighting
12 or 24V
Running on circuits 12V or 24V without adjustment to do.
Electroluminescent EL lighting of the serigraphy and LCD display.
The LCD screen display makes reading instant of the battery voltage measured on four-digit.
Display of EL on serigraphy can be command separately (with the navigation lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The functioning mode of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the electroluminescence EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
The front panel is well protected and the electronic components are drowned in the resin.
|
|
|
|
|
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one or more independent batteries in the form of light and use the EL Electroluminescence Lighting technology for his serigraphy back lighting.
The supervisory function of each battery bank even when the monitor is shut down can trigger an audible and visual alarm when it is activated.
Large scale bright with 16 LEDs between 9,5V to 15,2V and 19V to 30,4V for the 24V versions. The distribution of LEDs provides an accurate indication of the battery's state.
Display of EL on serigraphy can be command separately (with the navigation lights, for example).
1, 2 or 3 buttons allow the display selection of the battery to be viewed.
An audible alarm is integrated and bright / triggered by the low voltage level or the high voltage in each battery bank connected.
The modus operandi of the device can be defined depending of the use: permanent mode, timed or on/off mode.
The domestic consumption of the unit is extremely low running even with the EL and even more in sleep mode. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
The front panel is waterproof and the electronic components are drowned in the resin.
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of one battery in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
|
|
|
|
|
|
|
NAVYLEC BATTERY MONITOR NL208-12X
Precision LEDs voltmeter’s for 12V batteries with alarm and relay
(size B2 W.80 x H.80mm)
For 1, 2 or 3 12V batteries
Batteries monitored simultaneously
Audible, light and relay alarms
Instant visualization
Direct interpretation of the measure
Measurement accuracy of 10mV
LEDs voltmeter compact 80x80mm
Very low consumption
The high-end LEDs voltmeter NAVYLEC NL208-12X can measure the voltage of one or more independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
• Scale bright with 9 LEDs between 9,5 and 15,2V. The distribution of LEDs provides an accurate indication of the battery’s state.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
• Instant reading of the measure on the LEDs.
• Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
• An Audible alarm, visual and by relay is integrated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running. To further reduce it, this consumption is partitioned into different batteries for versions 2 and 3 batteries.
• The front panel is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures : main battery bank, engine, bow thrusters, electronic, auxiliary, etc
|
|
The high-end LEDs voltmeter NAVYLEC can measure the voltage of two independent batteries in the form of light.
The supervisory function of each battery bank can trigger an audible, a visual and a relay alarms when it is activated.
|
|
|
|
|
|
|
For Deep Cycle Batteries used in Marine, RV, camping, off-road, military, emergency vehicles, construction equipment, electric vehicles, industrial battery equipment, and other deep cycle battery applications.
Optimize performance and extend battery life.
Deep Cycle batteries supply electric power for extended periods of time. It is often critical to understand just how much energy is in a battery so you can use it with confidence or know when to recharge. The microprocessor of the BB-DCM series uses LPR to measure battery internal resistance every minute and calculates available stored energy. An analog 'battery fuel gauge' indicates how full the battery is. Visual icons and audible alarms indicate when it is time to recharge.
Replace your battery before it fails.
Even a well maintained battery loses capacity over time and eventually it will not be able to store enough energy to do its job. The BB-DCM is the first and only monitor to track battery state of health deterioration while the battery is in use. When storage capability drops to a critical level, visual and audible alarms warn you to replace the battery.
The BB-DCM mounts in seconds to the battery surface and connects to the battery terminals. The information-packed LCD display shows battery state of charge (energy fuel gauge), state of health / battery life, and battery voltage. Visual and audible alarms indicate low charge / recharge, and end of life / replace battery conditions.
|
|
You’re out on the water kicking back, listening to your favorite tunes, while enjoying family and friends. You wish it could never end. Then when it’s time to head in you realize, the battery is drained and you’re stuck. Don’t let this
happen to you. A dead battery can be a real hassle and worse, this could turn into a dangerous situation.
|
|
|
|
|
|
|
Identify critical battery faults and measure battery state of health.
The AA350 is an effective solution for measuring automotive batteries on the bench, and for an owner/operator to use for testing storage batteries in RV and Marine applications. Large Pulse Resistance (LPR) technology provides a highly accurate snapshot of battery state of health. Compensation algorithms automatically adjust for temperature and discharged battery conditions.
Fast to operate, and easy to understand results.
The entire test sequence can be completed in a few seconds. The AA series interface and displays are clear and intuitive, providing users with a wealth of clearly organized results. The graphical display offers at-a-glance understanding of key battery performance characteristics with icons and audible alarms highlighting critical battery problems.
Diagnose and replace batteries before they fail
- Measure battery storage capability
- Calculates Battery Life / State of Health
- Test batteries as low as 20% state of charge
- Automatic state of charge and temperature correction
|
|
|
To avoid overcharging your battery. Perfect match for solar panels generating up to 10A of current. Charging 12V battery systems. Intelligent PWM charge control ensures batteries reach max capacity. Built-in LED indicator instantly displays charging status
|
|
The C40 has long been the mainstay of our charge controller line-up, its versatility and reliability have made it an industry standard. Now the C40 is joined by two companion controllers, the C35 and C60.
|
|
The amps measure with a shunt in a positive circuit by a digital instrument is very rare and is non-existent in marine. It is due to the technical difficulty to use a +12V (or +24V) in reference to place of the zero/mass of the battery negative.
Measure on the Positive by shunt
Selection of shunts from 10 to 1000Amp
High accuracy
Permanent display
Flow current indication by green / red LED
Display resolution from 10mA
Compact LCD Ammeter 80x80mm
Very low powerconsumption 15mA@12V / 7,5mA@24V
The universal ammeter NL227-001 allows an immediate reading of a direct current in Amperes, which results from sources of charge (alternator, battery charger, solar panels, etc.) and consumers in service who discharges the battery.
|
|
|
To avoid overcharging your battery. Perfect match for solar panels generating up to 20A of current. Charging 12V battery systems. Integrated display gives you information on the battery status
|
|
TEXT Follows
Seijsener Marina Services is proud to present a brand new portable electricity meter! This meter is a single phase 16A meter with 50cm cable on borh sides. The Seijsener portable meter is 100% waterproof and sealed by state of the art sonar technique.
|
|
A Mastervolt battery monitoring panel brings an end to nasty surprises, like a sudden shortage of battery power. This panel provides basic information.
This information includes reading voltage and remaining capacity in percentage terms of three independent batteries. The Masterlink DCV-I (12/24V DC) includes an adjustable alarm for each battery set, and works without a shunt. Installation is easy with the terminal strip up to three voltage for easy fitting of sense wires, a battery alarm, buzzer or lamp, and a common negative. A tailor made six-way connection cable is also available.
|
|
The Link 1000 is an instrumentation and control panel designed for use with the Xantrex Freedom series inverter/charger and a single battery bank. It reads like a fuel gauge for batteries – displaying battery state-of-charge at a glance. Inverter and charger functions are independently controlled with the touch of a keypad.
|
|
|
The new EOS® controller is easily installable into existing circuit thanks to a wiring connection RS485 or wireless protocol (available on demand) and can be interfaced with integrated electronic management systems.
|
|
The NL208-02X Battery Monitor is a LEDs voltmeter to measure the voltage from one or more independent batteries in the form of light.
%u2022 Scale bright with 9 LEDs between 9,5 and 15,2V.
%u2022 A specific marker (alternator) can instantly verify the proper functioning of battery charge system.
%u2022 Instant reading of the measure on the LEDs.
%u2022 Models 2 and 3 batteries can instantly give the read on the status of each battery connected.
%u2022 The domestic consumption of the unit is extremely low running
%u2022 The front panel is waterproof and the electronic components are drowned in the resin.
Its small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures: main battery bank, engine, bow thrusters, electronic, auxiliary, etc.
|
|
The LCD Battery Monitor is an indicator to measure the battery voltage on digital screen permanently.
Its very high precision measuring 4 digits ensured a very high level of quality.
Autorange 12-24V DC
|
|
|
The Battery Monitor NL208-021 is LEDs voltmeter lets know direct interpretation of the voltage of one battery in light form.
|
|
|
|
|
|
|
NAVYLEC LCD BATTERY MONITOR NL229-021/121
Precision LCD voltmeter’s 12 or 24V with alarm and relay (without relay for the NL229-021 unit)
(size B2 W.80 x H.80mm)
For one 12 or 24V batterie
12-24V auto-ranging
4-digits LCD display
Audible, LED and relay alarms
On/off alarm mode
Measurement accuracy of 10mV
LCD voltmeter compact 80x80mm
Very low consumption
The LCD Battery Monitor is an indicator to measure the battery voltage on digital screen permanently.
Its very high precision measuring 4 digits ensured a very high level of quality.
• Running on circuits 12V or 24V without adjustment to do.
• The four-digit display of the LCD screen makes reading instant the battery voltage measured with an accuracy of 10mV.
• A specific marker (alternator) can instantly verify the proper functioning of battery charge system
• An Audible alarm, visual and by relay is incorporated. It activates, turns off or stopped by the push button.
• The domestic consumption of the unit is extremely low running.
• The front panel is well protected and the electronic components are drowned in the resin.
It’s small size (80x80mm) allows an easy installation on any existing panel or near the battery to be controlled.
Recommended for any batteries measures: main battery bank, engine, bow thrusters, electronic, auxiliary, etc.
|
|
|
The VDO Ocean Line voltmeter displays the status of generator and battery and their loads on a voltage scale. Values exceeding the normal charging voltages can be monitored exactly, coupled with the ability to detect any deep discharge
|
|
|
The 600-ACM monitor offers full comprehensive monitoring for your AC system from standard single line inputs to twin line systems as used in the USA (no need for additional selector switch for AC inputs). The 600-ACM is supplied with an AC transducer, Part No: AC-VSEN and current transformer Part No: CT-10-3 detailed below. A larger CT, Part No: CT-HD, is also available where cables are too large to pass through the standard CT. Diagrams below show basic installation. Selectable legends allow full information to be shown on the screen to avoid confusion, unlike other digital meters available, which only show confusing digits. LCD screen draws 70% less than equivalent LED screens.
|
|
|
The 600-VM3 offers the ability to have 3 voltage inputs with Hi/Low alarms. It can also be configured as a bilge monitor with selectable legends for different bilge areas. This allows the 600-VM3 to be either fully configured as a voltmeter or partially as volts or bilge, eg: position 1 volt meter, position 2 & 3 bilge monitor. Selectable legends allow full information to be shown on the screen, unlike other digital meters available which only show confusing digits. LCD screen draws 70% less than equivalent LED screens.
|
|
| ... products without information |
| |
|
|
Testers, Multimeters, Voltmeters...
