|
|
This model is recommended in case of a generator on board.
Advantage of the SOLO models:
- low consumption (SOLO 60: 3A, SOLO 100: 5A)
- small dimension
- high outputs
- modular design allowing to adapt to small spaces
- reliability recognized for more than 30 years
|
|
HP SC ( Super Compact) is supplied on its frame. SC Series can be equipped of membranes 2521 (short) up to a production of 140 Lt/h and can produce up to 260 Lt/h with four membranes 2540.
SC Auto series is equipped of the automatic pressure regulation and automatic membranes flushing.
|
|
HP SC DOUBLE is supplied in a single block. It is a modular system composed by two independent machines, producing from 140 lt/h with two membranes 2540 up to 540 lt/h with 8 membranes.
The machine can be supplied in a MANUAL version, the AUTO version (with automatic membranes' flush) and eventually equipped with RP TRONIC system, the automatic pressure regulation.
|
|
The HP V series answers to the demands of spaces on board with regards to the mono block construction.
The vertical conception of the plant gives the possibility to insert the system in tight places. The base of the HP V is only 470 mm X 280 mm, and the height is 620 mm.
These measurements are referred to the body of the watermaker that in this case does not include the membranes that can be easily be installed vertically or horizontally everywhere. The watermakers of the V series are modular and can be supplied in the V KIT version (see the drawing in the following page ) without any extra cost.
|
|
|
The Ultra Whisper is a low power watermaker, engineered for boaters with limited electrical options. The very quiet Ultra Whisper features automatic operation and is easy to use with its simple Start and Stop controls. It serves as an efficient water supply, ideal for small power boats and sail boats.
|
|
|
The Ultra Whisper is a low power watermaker, engineered for boaters with limited electrical options. The very quiet Ultra Whisper features automatic operation and is easy to use with its simple Start and Stop controls. It serves as an efficient water supply, ideal for small power boats and sail boats.
|
|
|
Aqua Matic (patent pending), with comprehensive one touch automation...virtually eliminates the need for an operator. It requires no pressure adjustment and self-regulates to any feed water condition. The user-friendly touch screen displays pictorial images of all operating conditions, which can also be viewed with the optional remote touch screen controller from any location on the boat. All system readings can be selected to display either U.S. Standard or Metric measurements. Automatic shut down can be set for time duration or for a specified product water production amount. “For those who wish to be in control, the system may also be operated in manual mode”, says Rollins, whose company manufactures the first fully automated watermaker in the marine industry.
|
|
|
The Aqua Whisper watermakers produce from 450 to 1800 U.S. Gallons per day (1,703 to 6,814 liters per day). These watermakers combine small size, efficiency, and quiet operation due to its stainless steel triplex plunge pump.
|
|
A portable Spectra Watermaker designed for on the go land use. These rugged watermakers are engineered for the mobile conditions in remote areas where good water is essential. The Aquifer 150 system makes 150
gallons of purified fresh drinking water every day in almost any climate.
The Aquifer 150 is:
- Compact
- Light Weight
- Energy Efficient
- Self Contained
- Easy To Use
|
|
|
|
|
|
|
At last! A Spectra watermaker designed and engineered for the smaller vessel. The Ventura 150 (operates anywhere in the world) and the new Ventura 200T (tropical water applications only) are energy efficient, light weight, and self regulating. The Ventura is a very affordable compact watermaker with all the great features Spectra has become known for. The Ventura series is easy to install and use, quiet, very energy efficient, and it delivers up to 8 gallons of fresh product water (30 liters) per hour.
It’s ideal for installation in limited spaces on cruising and racing vessels. The exclusive Spectra-Clark Pump High-Pressure Intensifier maintains the proper pressures in the membrane throughout a wide range of temperatures and water conditions without any adjustments or loss of product water output. The machine’s composite construction is corrosion resistant for superior reliability. All this while producing all the water you need a day! With a Ventura aboard, there is no reason to compromise your creature comforts while cruising. You will have plenty of fresh water left over for boat and gear. Every Ventura comes complete and ready to install. Spectra’s High Pressure Intensifier is factory mounted with a 20 inch membrane in a Spectra high pressure vessel assembly. All high-pressure piping is pre-plumbed at the factory. Module brackets allow for installation in any orientation. Included with the Ventura is a complete installation kit, installation and operation manual, and warranty registration card. All you provide is the two thru-hull fittings and electrical connection.
|
|
|
|
|
|
|
The Catalina 300 is affordable, light weight and compact with all the great features Spectra has become known for. The Catalina is easy to install, simple to use, quiet, very energy efficient and it will deliver 12.5 gallons (47 Liters) per hour while running on 15 amps at 12 volts DC. Catalina 300’s modular construction allows for easy owner installation and is ideal for those limited spaces on cruising and racing vessels where more water is needed.
With the Catalina 300 on board, there is no reason to compromise your creature comforts while cruising. You will have plenty of fresh water for boat and gear.
Spectra’s exclusive high pressure Intensifier maintains the proper pressures in the system’s membrane throughout a wide range of ocean temperatures and water conditions without any adjustments or loss of product water output. The tough composite construction is corrosion resistant for superior reliability.
Every Catalina 300 comes complete including the ultra reliable and efficient SpectraMag™-Pump. The Spectra High Pressure Intensifier is factory mounted with a 40 inch membrane in a Spectra high-pressure vessel assembly. High-pressure piping is pre-plumbed at the factory. The module brackets allow for installation in any orientation. All you provide is the two thru-hull fittings and electrical hook up. A One Year Complete Limited Warranty is available through our world wide distributor network.
|
|
|
|
|
|
|
Spectra Watermakers' Farallon series, like the proven Newport MKII series, are the most technically advanced marine desalination systems available today. Utilizing the experience gained from over ten years of building the world's most automated and energy efficient watermakers, Spectra has taken a quantum step in developing the next generation in marine desalination systems; the Farallon 1800 and 2800.
More compact than it's predecessors
Contained in a single enclosure, the Farallon series is more compact than its traditional predecessors, with the option of mounting the membranes and electrical control box directly on the unit or remotely. With the centralized plumbing manifold and limited wiring connections, installation is easier and faster. The Farallon features the revolutionary new “Spectra Pearson Pump™” technology coupled to a completely enclosed, fan cooled, commercial grade motor and control system. The remote mountable electronic control module, has an integrated MPC 5000 control display for touch pad operation at the equipment mounting location, as well as an additional touchpad remote control for one touch operation at any location on the vessel.
|
|
|
|
|
|
|
Spectra Watermakers Inc. introduces a final solution to the problem of Watermachines storage with the revolutionary Z-Brane™. This technology is designed to change the way Watermachines are used and maintained forever by eliminating the need for chemicals to clean and store membranes.
Using the proven Z-Guard™ technology, Spectra now is applying it directly to the watermachine membrane to prevent scaling and biological fouling, the principle cause of membrane failure in reverse osmosis systems. Fouling has been labeled as unavoidable by many sources. The origin of fouling varies and can be mineral, biological or a combination of both.
Bio-film is the slick coating or slime found on wetted surfaces produced by many types of microbes. A thin layer of bio-film usually coats the interior of piping, filters and membranes when exposed to water. This bio-film provides both habitat and food supply for a range of bacteria and scale forming compounds. Bio-film is the cause of odors and discoloration in pre-filters and storage tanks. The Z-Brane™ will eliminate conditions that foster bio-fouling and scaling.
|
|
|
|
|
|
|
At last! A Spectra Watermaker designed and engineered for the smaller vessel. The Ventura 150 difference is its energy efficiency, light weight, and self regulating system. The Ventura is an affordable, and compact watermaker with all the great features Spectra has become known for. The Ventura 150 is easy to install and use, quiet, very energy efficient, and it delivers over six gallons of fresh product water (24 liters) per hour.
It’s ideal for installation in limited spaces on cruising and racing vessels. The exclusive Spectra High-Pressure Intensifier maintains the proper pressures in the membrane throughout a wide range of temperatures and water conditions without any adjustments or loss of product water output. The machine’s composite construction is corrosion resistant for superior reliability. All this while producing 150 gallons a day!
With a Ventura 150, there is no reason to compromise your creature comforts while cruising. You will have plenty of fresh water left over for boat and gear. Every Ventura comes complete and ready to install. Spectra’s High Pressure Intensifier is factory mounted with a 20 inch membrane in a Spectra high pressure vessel assembly. All high-pressure piping is pre-plumbed at the factory. Module brackets allow for installation in any orientation. Included with the Ventura 150 is a complete installation kit, installation and operation manual, and warranty registration card. All that you provide is the two thru-hull fittings and electrical hook ups.
|
|
Spectra Watermakers’ Newport 700 and 1000 MKII, like the proven 400 MKII, are the most technically advanced marine desalination systems available today. Utilizing the experience gained from over eight years of building the world’s most automated and energy efficient watermakers, Spectra has again taken a quantum step in developing the next generation in the Newport series, the Newport 700 and 1000 MKII.
The MKII is designed and engineered for maximum reliability, efficiency, and ease of service. Spectra’s proprietary “Clark Pump” high pressure intensifier maintains the proper pressures in the membrane throughout a wide range of ocean temperatures and water conditions without any adjustments or loss of product water output. The composite construction is corrosion resistant and there are no flow control valves, pressure or flow gauges to adjust. Available in all voltages. These are the most versatile and quiet watermakers you can buy.
|
|
The advantages of this product are:
- its small dimension
- its high outputs
- its modular design allowing to adapt to small spaces
- its reliability recognized for more than 30 years
|
|
|
|
|
|
|
NEW * NEW * NEW
Compact, economical and quiet - very easy to operate and the best price-performance ratio. But above all, high water- and outstanding components-quality. Enjoy a new independence and improved safety on board. The AQUAGIV SILVER SERIES.
Small - lightweight - compact
The new SILVER SERIES finds himself place even in tiny spaces. Since everything has already been pre-assembled, installation is easy and quick.
Processor control
The constant monitoring of salinity, the constant monitoring of operating conditions and the fully automatic flush - even in your absence: the control of the new SILVER SERIES is child's play, and relieves the user of almost all the work.
Remote control
The optional remote control allows you an easy control and monitoring from a different place. Keep the track.
New salinity sensor ACS01
In the search for technical solutions that are very reliable, AQUAGIV goes new ways: with the new - in-house developed and produced salt sensor that monitors water quality throughout the production. Only wholesome water reaches your tank.
High pressure pump unit
The heart of a desalination plant is the high-pressure unit. It must be able to produce up to 60 bar pressure and cope durable with the aggressive medium saltwater. Therefore the new AQUAGIV Watermaker comes with the Danfoss pump consisting of duplex and super duplex stainless steel, whose lifetime is at least 8000 hours without maintenance. Annoying oil changes are eliminated completely.
|
|
Available from only 3.990 Euros: The Watermaker, reduced to the basic essentials for the reliable production of your fresh water. Purposely parts that are not needed for the basic and reliable water production were left out. The result is a Watermaker with the best price compared to performance, which works completely without any control electronics.
Only first-class components are used on this equipment ensuring a reliable and uncomplicated water supply on board. The heart of a desalination plant is the high-pressure unit. It must be able to produce up to 60 bar pressure and cope durable with the aggressive medium saltwater. Therefore the new AQUAGIV Watermaker comes with the Danfoss pump consisting of duplex and super duplex stainless steel, whose lifetime is at least 8000 hours without maintenance. Annoying oil changes are eliminated completely.
Ideal for refits and do-it-yourself installation.
|
|
The DUO is the first bi-powered water maker system world-wide.
It functions at the turn of a switch either on D.C. (12 or 24V) or on A.C. (120, 230 or 400V), as the DUO is an intelligent patented system.
Thanks to this system, the motors operate independently from each other, with neither electric clutch activation nor manual manipulation of the pulleys.
Like all Dessalator products the DUO is 100% reliable and safe. For over six years major shipyards have been including it as a standard fixture and since 2005 the DUO 100® has become indispensable for navigators.
The advantage of the DUO is its "2 in 1" aspect, as if there were two water makers available with the facility to function optimally and logically.
|
|
Ultra Compact watermaker with TERS
(Thermal Energy Recovery System).
It can be supplied in 12V - 24V - 220V 50Hz - 230V 60 Hz
|
|
For sailing or motor yachts with generators of 4.5 KW or more the ECHO Tec. series AML/S with 50 or 60 Hz AC motors is the right choice.
The highly efficient epoxy and polyurethane coated, totally enclosed capacitor-start-capacitor-run motors are designed for continuous duty under tropical conditions.
The modular system is space saving and easy to install. As for all other ECHO Tec. Watermakers only highest quality components that have proven to withstand continuous duty in a harsh marine environment are selected for unsurpassed reliability and lifetime.
For ultimate corrosion resistance, all wetted components including the high pressure pump head, the true regulating pressure valve and the high pressure fittings are made from 316 Ti stainless steel.
|
|
Ultra Compact watermaker with TERS
(Thermal Energy Recovery System).
It can be supplied in 12V - 24V - 220V 50Hz - 230V 60 Hz
|
|
With the release of the new 12 / 24 Volt DC
Watermaker 200-DML-1, a break through in efficiency for desalination systems, utilizing triplex ceramic plunger pumps was achieved.
Triplex plunger pumps are known to be the most reliable high pressure pumps available on today's market. The ECHOTec. pump is a low revolution (570 RPM) 316 Ti (Titanium) stainless steel version, driven by a highly efficient permanent magnet motor, designed for continuous duty under tropical conditions.
No low reliable and service intensive energy recovery pumps or irreparable electronic circuits that can stall the entire system are used on any ECHOTec.Watermaker.
|
|
|
|
|
|
|
|
Spectra Watermakers' Newport 400 MKII is the most technically advanced marine desalination system available today. Utilizing the experience gained from over eight years of building the world's most automated and energy efficient watermakers, Spectra has again taken a quantum step in developing the next generation in the Newport series, the Newport 400 MKII. The Newport 400 MKII is designed and engineered for maximum reliability efficiency, and ease of service. As with our other systems the MKII comes complete with Spectra's proprietary Clark Pump high pressure intensifier which maintains the proper pressures in the membrane throughout a wide range of ocean temperatures and water conditions without any adjustments or loss of product water output. Its composite construction is corrosion resistant and convenient to use because there are no flow or water pressure adjustments. The Newport 400 MKII is available in both 12V and 24V to allow the versatility and safety of low voltage operation and the most quiet watermaking available.
|
|
Affordable, light and easy to install, SMART is the ideal solution for those who prefer a simple and essential system.
Watermaker SMART 60S12-24 60 lit/h :
Watermaker group dimensions: L= 118 D= 25 H= 30 cm.
Pump group dimension L= 34 D= 19 H= 35 cm.
Weight: 31 Kg
Consumption: 240 Watt (20A @ 12 VDC)
Power supply: 12 or 24 VDC
Pressure regulation: automatic
External feed pump
Energy Recovery System Inside
|
|
Affordable, light and easy to install, SMART is the ideal solution for those who prefer a simple and essential system.
Watermaker SMART 30S12-24 30 lit/h :
Watermaker group dimensions: L= 68 D= 24 H= 24 cm.
Pump group dimension L= 34 D= 19 H= 35 cm.
Weight: 25 Kg
Consumption: 110 Watt (9A @ 12 VDC)
Power supply: 12 or 24 VDC
Pressure regulation: automatic
External feed pump
Energy Recovery System Inside
|
|
A wide output range is able to satisfy all needs. Modular systems are ideal for heavy use, even in severe conditions.
Watermaker MODULAR 30M12-24 35 lit/h :
Watermaker group dimensions: L= 68 D= 22 H= 30 cm.
Pump group dimension L= 34 D= 19 H= 35 cm.
Weight: 31 Kg
Consumption: 100 Watt (8A @ 12 VDC)
Power supply: 12 or 24 VDC
Pressure regulation: automatic
External feed pump
Energy Recovery System Inside
|
|
Compact, automatic, energy-saving, easy to install. All components of the Ready are assembled as a single unit.
The installation is easy, quick and inexpensive as only the connections necessary are the inlet and outlet hoses.
The first "all in one" new generation watermaker!
Watermaker READY 60R12-24 60 lit/h :
Watermaker group dimensions: L= 85 D= 35 H= 31 cm.
Weight: 38 Kg
Consumption: 240 Watt (20A @ 12 VDC)
Power supply: 12 or 24 VDC
Pressure regulation: automatic
Feed pump inside
Energy Recovery System Inside
|
|
Compact, automatic, energy-saving, easy to install. All components of the Ready are assembled as a single unit.
The installation is easy, quick and inexpensive as only the connections necessary are the inlet and outlet hoses.
The first "all in one" new generation watermaker!
Watermaker READY 30R12-24 35 lit/h :
Watermaker group dimensions: L= 85 D= 35 H= 31 cm.
Weight: 31 Kg
Consumption: 100 Watt (8A @ 12 VDC)
Power supply: 12 or 24 VDC
Pressure regulation: automatic
Feed pump inside
Energy Recovery System Inside
|
|
|
|
Boat water-makers 
