|
|
|
The Marine Cord Set features a MP16-20 moulded boat connector (including LED power indicator and protection cap) and a moulded CEE shore plug to PUR cable. This combination offers the best watertight, rugged and reliable construction on the market.
|
|
CEE EXTENSION CORD SETS 16A, 250V
Moulded 3 pin (male) CEE plug and moulded (female) CEE connector with LED power indicator and weather proof protection cap. CE Marking
|
|
SHORE POWER CONNECTION CABLE WITH EARTHED PLUG
Oil and weather-resistant rubber cable 3 x 1,5 mm2
|
|
Electrical box for superyacht applications
Webasto also offers an electrical box for superyacht applications
according to MCA standards. Due to high customization,
please contact us directly in order to choose the right solution.
|
|
FLOATING TRANSMITTER
In case of fall into the water, the transmitter will fl oat allowing an easy
and prompt salvage.
|
|
GROUND PLATE RECTANGULAR 205 X 64 X 13 MM (8X2 1/2"X1/2"). SURFACE 2SQ/M.
Glomex Synthesized bronze Ground Plates are the necessary interface between electric and electronic board devices and the dissipator element: water.
The Bronze micro-spheres realize a huge contact surface with the dissipator element (water), given by the sum of the surfaces of all the bronze spheres; in fact, supported by the porosity of each ground plate, water penetrates into the plates touching the surface of all the spheres.
This kind of construction provides more efficiency than the smooth ground plates.
Glomex Ground Plates are provided with bolt and spacers done with the same material (bronze) used for the plates, in order to avoid electro-corrosion phenomena.
The new 2009 exclusive shape proposed by Glomex provide to an extended developed surface and stronger plate edges.
|
|
|
The range of electric switchboards NL102 ensures an easy distribution of the service circuit in 12 or 24V, secure and flexible depending on the number of output to protect. With the use of electronic fuses, the user does not need to replace it in case of short-circuit or overload.
|
|
|
|
|
|
|
The range of electric switchboards, fuse holder based, ensures an easy distribution of the service circuit in 12 or 24V, secure and flexible depending on the number of output to protect. The use of fuse plug is widespread and it%u2019s easy to change the size of the protection, without disassembly, by the front panel.
NAVYLEC NL101
ATC FUSE/SWITCH PANELS
Switchboard ATC fuse holder
Sizes :
1-way : W.140 x H.40mm
2-way : W.140 x H.60mm
3-way : W.140 x H.80mm
4-way : W.140 x H.100mm
5-way : W.140 x H.120mm
6-way : W.140 x H.140mm
7-way : W.140 x H.160mm
8-way : W.140 x H.180mm
Panels from 1 to 8 ways
12 or 24Vdc
Caliber of snap fuses up to 10A
Single pole
Compact size
Functions labels
Circuit LEDs status
Faston connectors
Aluminium front panel
Anticorrosion treatment
Using voltage in 12 or 24Vdc.
Front panel in aluminium, black epoxy paint protected, white and yellow serigraphy NAVYLEC.
Distribution circuit, snap fuses protected, interchangeable, maximum size 10A by way.
Printed circuit varnish protected.
Easy Connection by faston connectors Input / Output.
Switch On/Off by way with serigraphy 0/1.
Green LED for monitoring the circuit status in operation or not and the fuse state.
Each way has a window that can receive standard labels for the names of customizable functions or on the web site www.navylec.com
|
|
For installation of a fused marine electrical system. Sturdy, bakelite panel with metal on/off toggle switches. 12 volts D.C. only. Each switch rated at 5 amps. Fuse holders include 1/4" x 1-1/4", 5-amp fuses. Fuses are bridged to a single hot feed connection.
|
|
|
Equipped with watertight toggle switches, with built-in "ON" pilot light. The first switch has 3 positions ON-OFF-ON with two separate circuits, the last one is a spring switch for the horn. Supplied with automatic watertight fuses (2 of 15 A, 3 of 10 A and 1 of 5 A). Protection level IP56. Includes 3 polycarbonate self-adhesive labels, for various functions, in Italian, English and German.
|
|
|
The electro-hydraulic power unit with solenoid valves is mainly composed by an electric motor, an hydraulic pump, a tank, some valves that are electro-magnetically actuated and a built-in relief valve. For the choice of the most suitable unit it's important to make sure that electro-hydraulic power unit's capacity is proportionate to the steering cylinder's volume.
|
|
REVERSIBLE ELECTRO-HYDRAULIC POWER UNITS
The reversible electro-hydraulic power unit is mainly composed by a reversible electric motor, an hydraulic pump, a tank and a built-in relief valve. During the choice of the unit it's important to remember that a power unit belonging to this series can only be fitted together with the so-called 'balanced' or 'symmetric' steering cylinders, in other words, those cylinders with a passing-through rod.
|
|
|
|
|
|
|
ELECTROHYDRAULIC TELEPHONES EXCHANGE FOR ENSLAVEMENT
The range of the electrohydraulic telephones exchange for autopilot BCS is truly much wide in order to satisfy grandissima a variety of applications. Our telephones exchange not only represent an interface for the connection of the autopilot, but important characteristics have some that they render the system timoneria anchor simpler to install and to use. The first important advantage is what such telephones exchange can be endowed of a filling system automatic rifle. Therefore, the eventual ones added of oil will have to be carried out directly from the tank of the same telephone exchange, thus avoiding to soil plancia and the flying-bridge. Moreover, the annoying procedure of the clearing of the air from the system is not more necessary, as it comes automatically carried out from the electrohydraulic telephone exchange as the hydraulic oil circulates in the pipages. The range of electrohydraulic telephones exchange BCS is subdivided in two main series: the series of the telephones exchange with valves solenoids and that of the reversible units. For the choice of the suitable article pack-saddles to only say that in the majority of the applications it comes advised to the installation of a telephone exchange with valves solenoids, as generally more reliable. One prefers instead a reversible telephone exchange for all those applications in which express it is demanded and when absorption problems are introduced, like as an example on the sail boats.
|
|
Shore power unit with integrated effective 25A IU0 battery charger
- the unit has outputs for two socket lines and a remote controlled outlet for water heater
- service and start batteries have own charge circuits
|
|
Max Power’s radio remote control is designed to work with the entire range of Max Power tunnel and retractable thrusters. The remote control can also be used to operate other onboard equipment such as: windlasses, passerelles, cranes, etc.
* Supports up to 8 independently controlled channels
* Each receiver can switch four channels (12/24V 5A)
* Each transmitter can handle two receivers (8 channels)
* Digital recognition avoids accidental activation of other systems
* Available in 868Mhz (EU conformity)
* Available in 915Mhz (US conformity)
* Transmitter power supply: 2 lithium batteries 3V (CR2430) included
* Receiver power supply: 12/24V DC
* Zero power consumption when in standby mode (transmitter)
* Easy to install and set-up, simple to use
* Splash proof
|
|
The ANNAEVA push buttons type have been designed for the control of low voltage small loads such as relays, interfaces, dimmers, etc. via normally opened push buttons with momentary action.
The push buttons, depending on the model, have from 1 to 6 push buttons.
DOME TECHNOLOGY
FOR INTERIORS
VERY LOW RECESS
Protection grade IP 20
Material Stainless Steel
Spring Installation
|
|
Elby is the wireless push button battery and maintenance free.
It can be installed everywhere for several functions for the expansion of the lighting system, buzzer installation and others without masonry works and saving time.
|
|
|
|
|
|
|
NERO is a capacitive touch switch button which relaces the standard switch and push buttons for the switching on/off function and for the control of audio/video devices but with a step ahead. Unlike the standard switch buttons, as you don't need to make holes for it, it can be used in the most unusual modes and places thus allowing to give to the boat an unique style. Its very small dimensions enable space saving and give full to the interior designers.
NERO can be set as switch or push button and is available in several models, from one up six switches, it can disappear behind whatever surface or can be provided with a frame of different colours, versions and materials. It is also being properly designed in order to fit perfectly inside plates and material of the main electric productors suppliers.
Among the new models very interesting are NERO DIMMER an electronic light control provided with dimmer device at a low voltage and NERO DIMMER LED the electronic dimmer at low consumption for power led.
|
|
|
|
|
|
|
The installation of a radio remote control system does not imply any modification of the existing control station.
Thanks to this transmitter, extremely easy in handle, equipped with commands buttons well protected against unintended manoeuvres, you will be able to manage the ship by your self, evaluating at best the space at disposal.
NAVIGATION IN NARROW PASSAGES
The harbour and the channels navigation, are some of the most delicate phase for the skippers. The radio remote control IMET will allow you to manoeuvre the boat by yourself, from the most suitable position. A traditional stationary control console does not give the same degree of accuracy and efficiency.
MOORING
IMET radio remote control allows you to moor by yourself in absolute safety conditions, from any place of the boat, controlling the Right and Left engines, the bow and stern propeller. Choosing the most suitable point of view, you will approach comfortably the harbour’s wharf.
TO BITT THE ROPES
Keeping the complete control of your boat at your fingers, you can approach the wharf and recover the ropes with extreme simplicity,
adjusting the trajectory from you transmitter with small engine corrections. This high control capacity will also reduce the possibility of small collisions.
ANCHORAGE
Standing at the bow, you will be able to raise or drop the anchor, keeping an eye at the safe anchorage and at the presence of other anchors.
|
|
SAFETY KEY
This extractable “contact less” key allows the use of the radio remote to
authorised personnel only. The key extraction stops any operation.
|
|
The Smart power Relay E-1048-8C. - is a remote controlable electronic load relay and contains three functions in only one equipment:
- Electronic relay
- Electronic over-current protection
- Status and diagnostic functions.
The 7 pin CUBIC version (cube relay) fits in KFZ realay sockets. The rated current of the devices can be selected within the range 1 A to 25 A. The operating voltage range DC 9... 32 V permits the connection of DC to 12 v and DC 24 V-loads.
|
|
2-pole Selector switch 0-1-2-3 12-24Vdc 150mA maxi.
60x60mm Navylec range, varnished printed circuit.
|
|
|
The main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, facilitating operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.
|
|
|
|
Boat panels, Circuit-breakers, Plugs, Switches...
