- Maritime equipment >
- Navigation, Communications, Electronics >
- Other ROV equipment
Other ROV equipment
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Power: 1,500, 5,000 W
Thrust: 32, 95 kgf
Weight: 5,800 g
Low power and high torque Fast response Power efficiency Over-temperature protection, over-current protection, signal zero-crossing protection Internal isolation between the power supply and signal power supply system Good value ...
DWTEK - Subsea Solution Provider
Power: 500, 750 W
Thrust: 12 kgf - 25 kgf
Weight: 4, 5,500 kg
Static seals: easy to maintain and zero failure out Easy installation to plug in-and-out Over-temperature protection, over-current protection, signal zero-crossing protection Gear reducer mechanism Internal isolation between the ...
DWTEK - Subsea Solution Provider
Power: 1,000 W
Thrust: 24 kgf
Weight: 4,600 g
Static seals: easy to maintain and zero failure out Easy installation to plug in-and-out Over-temperature protection, over-current protection, signal zero-crossing protection Gear reducer mechanism Internal isolation between the ...
DWTEK - Subsea Solution Provider
Bollard pull: 100 kg
Rope diameter: 5 mm
Drum capacity: 35 m
The model GM hand winches are a base grade of Maxpull hand winches. With the built-in mechanical brake, the handle rotates clockwise to wind up, counterclockwise to wind down, and the brake is automatically applied at the stopped position ...
MAXPULL MACHINERY & ENGINEERING CO., LTD.
Bollard pull: 300 kg
Rope diameter: 6 mm
Drum capacity: 32 m
The model GM hand winches are a base grade of Maxpull hand winches. With the built-in mechanical brake, the handle rotates clockwise to wind up, counterclockwise to wind down, and the brake is automatically applied at the stopped position ...
MAXPULL MACHINERY & ENGINEERING CO., LTD.
Bollard pull: 500 kg
Rope diameter: 6 mm
Drum capacity: 40 m
The model GM hand winches are a base grade of Maxpull hand winches. With the built-in mechanical brake, the handle rotates clockwise to wind up, counterclockwise to wind down, and the brake is automatically applied at the stopped position ...
MAXPULL MACHINERY & ENGINEERING CO., LTD.
Power: 0.5 kW
Thrust: 5.5 daN
Weight: 3 kg
Maximum input power of 0.5kW Nominal voltage of 48V Equivalent to a 1 PK petrol motor Including cable set (2 meter) Minimal weight of 2.5 kg Efficiency of more than 90% Completely waterproof (IP68) Tube diameter at request Motor ...
Rim Drive Technology
Power: 3 kW
Thrust: 25 daN
Weight: 4 kg
Maximum input power of 3.0kW Nominal voltage of 24V Equivalent to a 6.5 PK petrol motor Including cable set (2 meter) Minimal weight of 3.5 kg Efficiency of more than 90% Completely waterproof (IP68) Tube diameter 100 mm Motor ...
Rim Drive Technology
Power: 3 kW
Thrust: 25 daN
Weight: 4 kg
Maximum input power of 3.0kW Nominal voltage of 48V Equivalent to a 6.5 PK petrol motor Including cable set (2 meter) Minimal weight of 3.5 kg Efficiency of more than 90% Completely waterproof (IP68) Ideal in combination with our ...
Rim Drive Technology
The HLK-43000 manipulator is a 5 Function rate controlled manipulator making use of an HLK-21020 jaw rotate offering 180 degree rotation on the wrist and a jaw opening range of 90mm (3.5") and a soft line cutting capability of 6mm (1/4”) ...
Hydro-Lek
The HLK-4000 manipulator is a 5 Function rate controlled manipulator making use of an HLK-2010 jaw rotate offering 180 degree rotation on the wrist and a jaw opening range of 154mm (6") and a softline cutting capability of 19mm (3/4”) ...
Hydro-Lek
The HLK-4200 manipulator is a 4 Function rate controlled manipulator making use of an HLK-25000 jaw rotate offering continuous rotation on the wrist and a jaw opening range of 154mm (6") and a softline cutting capability of 19mm (3/4”) ...
Hydro-Lek
This Gripper provides the ROV KIT and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on ...
ROVMAKER
This thruster has 2 versions! The last picture with the grille is the version for education use. For regular use, we are not recommended with grille, because it will affect the power of the thruster. The thruster adopts ROVMAKER ...
ROVMAKER
This R58 PRO underwater propeller is equipped with an efficient brushless motor, patented structure design, repeated matching of multiple propeller specifications, lightweight design, and compact structure, which are suitable for many ...
ROVMAKER
The Bravo 7 is a 7-Function manipulator that opens up new compact inspection and intervention opportunities for service providers, researchers, and other operators. The form factor was specifically designed for industry-leading inspection-class ...
Reach Robotics
Bollard pull: 5 t
Rope diameter: 22 mm - 78 mm
YMV manufactures wide range of towing winches for Tugboats, Multipurpose Supply Vessels, Workboats, Multicats and AHTS vessels. YMV towing winches pull capacity may vary from 5 tonnes to 250 tonnes. Hydraulic or electric drive can ...
YMV Winch Active Heave Compensation Mode gives the operator maximum control on load under extreme weather conditions. YMV Active Heave Compensation Winch is designed to reduce downtimes caused from Sea State conditions and thus operational ...
YMV Umbilical reeler is used for smooth winding or transferring of steel wire or hose. Umbilical length and diameter can be designed according to customers operational needings.
The Newton Subsea Gripper is a single function manipulator for the BlueROV2 and other subsea vehicles. It’s the result of several years of effort starting with a senior project in 2016 and evolving into the current design over several ...
BlueRobotics
The Electrical manipulator arm (EMA) is a high performance, compact and reliable multi-function module designed for underwater operation. 5 functions : slew, elevation, elbow, rotate, jaw (close/open) Can be mounted on TMI-Orion ...
The grabber is supplied with a three jaw attachment that offers the ability to grab objects of various shape in a variety of orientations. For alternate applications the three jaw attachment can be replaced with either a parallel two ...
Seabotix
The VideoRay Manipulator Arm easily attaches to the VideoRay Pro 4 skid’s existing holes and lifts objects from underwater. Heavy objects can be retrieved by using the tether of the ROV. Using the hand controller or control panel, you ...
VideoRay
Thrust: 200 kgf - 1,450 kgf
SMD’s Curvetech® range of thrusters offer industry-leading high performance with near equal forward and reverse thrust. The range encompasses thrusters from 230mm diameter to 750mm diameter with various motor options, which provides the ...
SMD
IBERCISA MO-E/160/4000-34 Ultra-deepwater Workclass ROV Deployment System. The Ibercisa MO-E/160/4000-34 mobile LARS offers best-in-class, ultra-deep water, harsh environment deployment of heavy Workclass ROV's. - Fully integrated 13.6t ...
High pressure open sided subsea wire rope cutter for up to 1.5” steel wire rope. The RCO40 is a high pressure, heavy duty wire rope cutter designed for subsea deployment in severe working conditions. The open sided design allows for ...
Allspeeds - Webtool
The ULB-364EL Underwater Location Beacon is a cost-effective acoustic relocation pinger designed for long-term deployment in the rigors of offshore use. The ULB-364EL allows the user to adjust the frequency from 27 to 45kHz and rep rate ...
RJE International Inc.
Propulsors and Thrusters Custom units can be built from small manouvering thrusters to large submarine propulsors. These are brushless DC, positive pressure balanced oil filled for 3,000m operation. Available in 316 stainless steel or ...
Umbilical winches are essential pieces of equipment that must be present on modern decks in order to help support the umbilical, mooring and anchoring activities. They are built to be resistant and never let you down under the harshest ...
DMT MARINE EQUIPMENT SA
Power: 4.2, 3.2, 1.9 kW
Thrust: 2.1, 1.8, 0.9 daN
2hp: Forward Thrust: 100lbs Reverse Thrust: 50lbs Nozzle OD: 7.1” Propeller OD: 5.8” Hydraulic Pressure: 3,000psi (206 bar) Max Thrust RPM: 2230 Hydraulic Power: 2.3hp (1.9 kW) Required Flow: 1.3 GPM (4.9 lpm) Integrated 485 – 4 wire ...
DOER Marine
Sub-Atlantic’s range of hydraulic thrusters have become the preferred propulsion for ROVs and cable burial/maintenance vehicles. Working in a highly aggressive environment, they have earned a reputation for reliability, efficiency and ...
Sub-Atlantic
Voltage: 230, 440 V
Bollard pull: 1,020 kg - 18,355 kg
Drum capacity: 5,000 m
Rectangular or round shape umbilicals Manual or electric spooling ATEX zones 2 and 1 Technical Specification Main drive system - Electric or hydraulic Spooling - Yes, electrical or manual Frequency - 50-60 Hz Control ...
Power: 30 kW - 3,800 kW
Thrust: 4 kN - 550 kN
Dutch Thrustleader Battery Driven Marine Propulsion - Azimuth- and tunnel thrusters. Today’s world demands clean & green ships. IMO’s strategy is reducing significantly greenhouse gas emissions through to 2050. Sailing with electric ...
MID-FREQUENCY PINGERS A quick and easy way to relocate an underwater site For more action shots, check out our Photos/Videos page JW Fishers acoustic pingers make it quick and easy to relocate an underwater site or piece of equipment. ...
JW Fishers
Deep waters, further seas, extreme climates. With a wide range of winches for deepwater operations as high technology machines for load handling in severe sea conditions. The BCM portfolio offers umbilical winches, ROV’s winches, transponder ...
Put your DTG3 to work with a two-function grabber or manipulator arm. This is great for retrieving objects, holding tools or deploying equipment such as a carabiner with a line attached. Purchase a Manipulator Bundle with the Grabber ...
Deep Trekker
Capacity 150 m cable diameter 8mm Material Plastic Dimensions (operating) 300 mm-400 mm-460 mm Dimensions (with handle removed) 300 mm-400 mm-380 mm Weight 9 kg Color Black Slider Anyone
EPRONS ROV & COMMERCIAL DIVING GROUP
Your suggestions for improvement:
Receive regular updates on this section.
Please refer to our Privacy Policy for details on how NauticExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- AboutVirtualExpo Group
Please specify:
Help us improve:
remaining