|
|
|
Thanks to their low weight and their high rigidity even big-sized elements out of Metawell require only a light sub-construction. Installations such as lamps and loud-speakers can frequently be inserted without the need of additional fittings. Metawell panels can not only be used in traditional frame solutions, which can be realized with all kinds of common sub-construction systems, but are also excellenty suited for self-supporting suspended ceiling 'islands' in public areas.
|
|
|
Aesthetic, fireproof and light, Lautex ceilings are especially suitable for the shipbuilding industry. The most common materials used in the construction of Lautex ceilings are aluminium and steel. Lautex suspended ceilings are certified in fire resistance classes C, B-0 and B-15, thus meeting the requirements of the official authorities. All our products have passed the flue gas and non-toxicity-tests.
|
|
|
Metawell panels are also used for raised floors and platforms in public areas of all kinds of vessels. In view of the stiffness of the panels the distance of the supporting frame can be increased, which reduces both assembly time and cost. For higher requirements regarding the compressive strength (point loads) special panels with a higher compressive strength are available. Technical information regarding the dimensioning of suspended floors can be obtained on request.
|
|
|
The use of big-sized Metawell panels in walls and linings is recommended to create an individual room design of bars, lounges, theatres and discotheques as well as for quickly mountable systems in hat profile constructions or with 'tongue-and-groove' joints. Metawell panels can be produced and processed in almost any length desired so that frequently horizontal joints can be avoided. They can be fixed with traditional systems, which allows for a quick and flexible installation.
|
|
|
Metawell Aluflex is the ideal sandwich material for all curved parts or balustrades as it can easily be shaped and has good sound attenuation characteristics. Thanks to its flexibility the material can be adjusted to the constructional conditions at site in the best possible way. The attractive corrugation can be used as design element, too.
|
|
|
|
|
|
|
ALMACO has a long tradition and much experience in cabin refurbishment, surpassing 10,000 cabins refurbished over the past 10 years. This expertise, together with the European and Asian manufacturers that are part of ALMACO%u2019s global supplier network, assure a delivery that is both price-competitive and up to the quality standards set by the owner.
Developing or renovating Accommodation Systems onboard requires attention to detail and constant supervision. ALMACO provides modernization solutions for Cabins, Bathrooms, Balconies and all Public Spaces. These solutions can be designed, supplied, installed, and commissioned by ALMACO under one contract, which allows both the owner and shipyard to benefit from ALMACO%u2019s overall responsibility, straightforward communications, and complete deliveries.
ALMACO is constantly looking into the evolving needs of owners and continues to develop products that meet those needs. ALMACO launched a range of Modernization Components that help solve operational and functional issues onboard. Our guidelines in product development are durability, easy installation, and cost-effectiveness. All our products meet the IMO standards.
|
|
|
R&M floating floors have been developed for very different needs, for example fire protection, sound reduction and also subsonic noise reduction. Our floors meet the requirements of any of these needs and can therefore be used for various situations.
|
|
The MSW70 multilayer wall is a heavy-duty wall designed to meet very stringent noise-insulation requirements.
In addition, this wall fulfills the requirements of fire classification B-30. The assembly is based on the groove-and-tongue principle. The wall is connected to the floor using prefabricated U-shaped sections, available in a number of different lengths from the manufacturer. The sections are laid out and fastened on the floor in combination with the corresponding corner pieces, T-shaped elements and crosspieces. Several types of surface finishes are available to suit different requirements; all of them have a removable protective foil to prevent any damage from occurring during installation. The pattern book that is supplied lists available decorative finishes. The design and all materials used have been tested and approved.
|
|
This system meets all applicable and highest fire protection requirements. Typically, such separation planes are formed by insulated steel walls. Consequently, the A-60 system is a favourable alternative because it uses a partition wall system of the A-60 fire class of considerably reduced weight which meets nevertheless all demands on fire protection.
The main benefit for yards and main suppliers is the time of execution regarding the schedule of the vessel. Welded steel walls are usually implemented in the beginning of all works, the R&M wall system A-60 can be mounted when all other items have already been brought into the vessel and have been fixed and at least connected. This means a wide space during most of the execution time of e.g. deckhouses.
The second benefit is the flexibility regarding changes in the vessel's / deckhouse's design. Even during the last days of execution modifications at the wall might be realized by low costs
|
|
|
The MSW50Z multilayer wall is designed to meet very stringent noise-insulation requirements. In addition, this wall fulfills the requirements of fire classification B-15. The assembly is based on the groove-and-tongue principle. The wall is connected to the floor using prefabricated U-shaped sections, available in a number of different lengths from the manufacturer. The sections are laid out and fastened on the floor. Several types of surface finishes are available to suit different requirements; all of them have a removable protective foil to prevent any damage from occurring during installation. The pattern book that is supplied lists available decorative finishes. The design and all materials used have been tested and approved.
|
|
The MSW50M multilayer wall is designed to meet very stringent noise-insulation requirements.
With its sound reduction index of Rw= 42 dB, this wall meets the highest requirements for noise control; in addition, it fulfills the requirements of fire classification B-15. The assembly is based on the groove-and-tongue principle. The wall is connected to the floor using prefabricated U-shaped sections, available in a number of different lengths from the manufacturer. The sections are laid out and fastened on the floor. Several types of surface finishes are available to suit different requirements; all of them have a removable protective foil to prevent any damage from occurring during installation. The pattern book that is supplied lists available decorative finishes. The design and all materials used have been tested and approved.
|
|
|
|
|
|
|
Constructional system of bulkheads and linings characterizes by almost complete prefabrication of elements and mounting profiles. It ensures easy and fast installation, and accomodations of high standard. Accomodations designed in this system meet the requirements of fire protection of all classes and acoustic insulation.
Apart from basic scope of bulkhead and lining panels we also produce bulkhead and lining panels for wet rooms.
Basic offer
- lining C-25mm
- lining B0/B15-25mm
- bulkhead C-50mm
- bulkhead B15-50mm
- acoustic bulkhead B15-50mm
- bulkhead with cable ducts B15-50mm
- bulkhead B15-80mm
Construction
The "sandwich" panels used in construction are made frm galvanized steel sheets coated with decorative PCV foil. Between steel sheets there is thermal and acoustic core made of mineral wool. Lenghtwise edpes of board, there are fastened with a connector, are shaped in such a way that they form "own festher", with after integration of boards create a butt connection of wall. The completness of system lies in the fact that the producer offers bottom and top profiles, multifunctional corner profiles, which make various joints between walls and walls/ceilings possible. In addition FAMOS offers lining doors, cable carings, window framings, cases for the extinguishers. "Omega" profiles enable an easy assembly and dismounting of walls panels.
|
|
The SD35A ceiling system is a sandwich construction made of sheet metal and mineral wool. This design features a high load-bearing capacity. The prefabricated border profiles provide additional strength to the wall system without the need for top profiles. The ceiling can be installed without consideration of the wall height.
After the substructure is mounted, the panels are screwed onto the ceiling using retention hooks. Assembly can be completed from the lower side of a specially designed final panel. With the exception of the two screws needed to attached the final panel, no screwed connections are visible.
|
|
|
The ED35A ceiling system consists of a sheet metal half-tray filled with mineral wool. This design features low weight and a solid and stabilizing substructure. The prefabricated border profiles of the wall system provide additional strength without the need for top profiles. In larger rooms, the panels can be installed with center profiles. After the substructure is mounted, the panels are laid into it and screwed on using retention hooks. With the exception of the two screws needed to attach the final panel, no screwed connections are visible.
|
|
|
Aesthetic, fireproof and light, Lautex ceilings are especially suitable for the shipbuilding industry. The most common materials used in the construction of Lautex ceilings are aluminium and steel. Lautex suspended ceilings are certified in fire resistance classes C, B-0 and B-15, thus meeting the requirements of the official authorities. All our products have passed the flue gas and non-toxicity-tests.
|
|
Technical data
Weight incl. joint profiles
11,5 kg/m2, width 300 mm
Weight incl. joint profiles
10,2 kg/m2, width 500 mm
Panel thickness
15/50 mm
Panel width standard
300, 500 mm
Panel length max.
3000 mm
|
|
|
WAS-Celing panel system is for the ceiling of each living space. It is lightweight and is enhanced to offer fire and noise protection. Because of the innovative design, this wall panel has received many certifications.
|
|
|
WAS-Celing panel system is for the ceiling of each living space. It is lightweight and is enhanced to offer fire and noise protection. Because of the innovative design, this wall panel has received many certifications.
|
|
|
The lightweight WAS ceiling system combines rigidity and strength, and is designed for both traditional and modular construction.
|
|
|
The lightweight WAS ceiling system combines rigidity and strength, and is designed for both traditional and modular construction.
|
|
Technical data
Weight incl. joint profiles
20,0 kg/m2
Panel thickness
50 mm
Panel width min.
175 mm
Panel width max.
600 mm
Panel length max.
3000 mm
|
|
|
Wall panels exist among living spaces between rooms and between each room and the hallway. They are also used in public spaces (including the kitchen, resting space, hospital, and storage area). By changing to our wall panel system, protection from light and noise and potential fire has been made more effective. Because of this, our panels have already been authenticated by and received numerous certifications from international organizations.
|
|
|
Wall panels exist among living spaces between rooms and between each room and the hallway. They are also used in public spaces (including the kitchen, resting space, hospital, and storage area). By changing to our wall panel system, protection from light and noise and potential fire has been made more effective. Because of this, our panels have already been authenticated by and received numerous certifications from international organizations.
|
|
Range of durable synthetic rubber floor tiles with a low profile studded surface.
Appropriate for all heavy duty marine installations.
|
|
The ceiling system is based on the SW50 wall design. With its B-15 fire classification and its sound reduction index of Rw=33dB, the ceiling system meets all requirements of a modern ship's ceiling system and additionally has a high-strength sandwich construction. The assembly is based on the groove-and-tongue principle.
The ceiling is laid onto a sturdy border profile, which runs along and is screwed to the wall. This eliminates the need for additional top profiles. In larger rooms, the panels can be installed with center profiles. The ceiling panels can be supplied with different types of surface finishes to suit different requirements; all of them have a removable protective film to protect them from becoming damaged during installation. The pattern book that is supplied lists available decorative finishes. The design and all materials used have been tested and approved.
|
|
Wall and ceiling panels made of non-asbestos mineral board are destined for building ship interiors in so called "traditional" way. The interiors designed and equipped in this system comply with the requirements of fire resistance.
Construction
In this system mineral bard is a core which is bonded with laminates on both sides. Laminates are approved as having low flame spread characteristics and are non-toxic. A range of panels enables to build bulkheads in alleyways, partitions between accomodations and linings of steel wall and decks. This system makes it possible to build so called "wet" accomodations such as kitchens, toilets etc, thanks to possibility of sealing grooved edges with silicones. Double walls comply with sound insulation standards. Wall panels are connected with each by means of a loose tonge steel spline. Corner connections are made from various angle and clamping rings. Ceiling panels are screwed to a framing. Joints can be masked with an Omega profile.
|
|
Ceiling systems are suspended and lightweight, and can be customized to meet your specific needs. Our marine ceilings are designed to meet current regulations for safety and noise reduction. With complete customization available, our ceiling systems offer numerous architectural configurations and design possibilities.
Sound Reduction %u2013 Designed to meet the noise reduction requirements of modern vessels.
Self-Supporting Fire Insulation %u2013 T-carrier system with overlay insulation provides an A30 fire rating and can be installed totally independent of the ceiling panels.
Design for Full Integration %u2013 With an emphasis on reducing installation time and improving upon appearance of the vessel interior, Jamestown ceiling systems are designed for full integration of accessories, including access panels, loud speakers, light fixtures, and air diffusers.
|
|
|
Norac has a wide range of ceiling systems used for both marine and land based construction and from standard solution to specially designed public room ceilings with the most innovative details.Some of the most modern passenger vessels in the world are equipped with the most versatile modular ceilings systems from “Danacoustic”.
|
|
Galvanized steel cassettes of 3 mm thickness. All 4 edges are bent for maximum strength.
To insulate according to A-60 fire class combined with acoustic insulation, the F-300 has proved to be a product preferred by many customers.
The system is easily transported and installed with a handy size. It has a very good carriying capasity due to the fact of using 180kgs/m2 insulation as a strong base materials with 3mm galv steel sheet top.
|
|
|
The SW50 sandwich wall represents the standard wall model. With a B-15 fire classification and a sound reduction index of Rw = 30 dB, this wall meets all requirements of a modern partition wall system. Its properties include optimum strength, achieved through its high-strength sandwich construction. The assembly is based on the groove-and-tongue principle. The wall is connected to the floor using prefabricated U-shaped sections, available in a number of different lengths from the manufacturer. The sections are laid out and fastened on the floor. Several types of surface finishes are available to suit different requirements; all of them have a removable protective foil to prevent any damage from occurring during installation. The pattern book that is supplied lists available decorative finishes. The design and all materials used have been tested and approved.
|
|
|
|
Partitions, Ceilings, Floors for ships
