|
|
|
SEEMATZ Floodlights are made of seawater resistant aluminium, white powder coated. Every screws are made of stainless steel. Wide beam reflector made of anodized aluminium and special hardened front pane. Sealings are made of temperature resistant silicone rubber. The front frame will be closed by two stainless steel spring locks - it makes the lamp change easy! SEEMATZ Flooflights are available in different voltages from 24VDC (200W Halogen) up to 230VAC. The high-power units have the compl. ignition units direct at the rear of the case - no extern power supply will be necessary! All units are conform to secure class 1, IP67, DIN/EN 60598 and 1000 hour salt-spary test ISO1456.
|
|
|
Casing, glass holding frame, latches and brackets made of stainless steel, powder-coated (RAL9018). Hard glas pane, resistant against temperature changes. With lampholder R7s and 1m connection cable 3x2sqmm wired.
|
|
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Highly polished aluminum wide beam reflector.
Stainless steel hardware.
|
|
Halogen floodlight FLH is designed to achieve the highest level of durability and performance under extreme environmental conditions across a wide range of temperatures.
Housing, glass frame, mounting bracket and junction box in seawater resistant aluminium finished in white polyester coating.
Bolts and nuts of stainless steel.
Heat resistant silicone rubber gasket and hardened front glass.
Meet shock testing according to IEC 69-2-27 test Ea.
|
|
Halogen Floodlight , maximum 200W
Tranberg floodlights are designed to meet rough environmental conditions on ships and offshore installations. It is the policy of Tranberg to provide products with the highest standard in quality and performance
|
|
Sealed beam floodlight
Tranbergs luminaires are all designed for use in rough environments. It is the policy of Tranberg to provide products and services that meet the highest standards of quality in the industry and the performance needs and expectations of our customers. The design of Tranberg luminaires is based on many years of experience and extensive research in the field of professional Marine lighting. Carefully selected materials are used to ensure maximum performance, low maintenance and a long trouble free life.
|
|
Tranbergs luminaires are all designed for use in rough environments.
It is the policy of Tranberg to provide products and services that meet the highest standards of quality in the industry and the performance needs and expectations of our customers. The design of Tranberg luminaires is based on many years of experience and extensive research in the field of professional Marine lighting. Carefully selected materials are used to ensure maximum performance, low
maintenance and a long trouble free life.
|
|
Description- Halogen floodlight
Additional information- Floodlight is swiveling.
Housing material- Stainless steel, non-corrosive, non-magnetic, seawater resistent. Diffuser glass.
Housing color- White painted
|
|
Protection class to EN 60 529: IP 56
Voltage: 24 V
Material:
- Casing: brass/red brass
- Bracket: stainless steel
Lamp: Halogen incandescent lamps
- 2x50W/approx. 1.800lm
- 2x100W/approx. 4.000lm
(not included in delivery)
Equipment:
- Heat insulating branching box
- Cable gland internal part: W10
|
|
Applications : decks, holds, industrial areas, etc.
Housing : stainless steel seamless deep drawn, powder coated white
Lamps (not included) : HST/HIT lamp 70W
Mounting :adjustable bracket, stainless steel, 4 mounting holes, 2 x Ø 10 mm and 2 x Ø 14 mm
Diffuser : safety glass
Electric : 230V, flexible wiring, high temperature resistant
|
|
High pressure sodium floodlight FLS is designed to achieve the highest level of durability and performance under extreme environmental conditions across a wide range of temperatures.
Housing, glass frame, mounting bracket and junction box in seawater resistant aluminium finished in white polyester coating.
Bolts and nuts of stainless steel.
Heat resistant silicone rubber gasket and hardened front glass.
Meet shock testing according to IEC 69-2-27 test Ea. 115V on request.
|
|
Housing- Stainless steel deep drawn, seamless
Reflector- Highly polished aluminium, anodized
Pane- Safety glass
Electric- Flexible wiring, silicone insulated, heat resistant up to 180° C, exterior connection box
Cable entry- Brass cable gland M 24 x 1.5 MGCG
Lamp base- E 27
Light sources- (Not included) High pressure sodium lamps (HS)
Mounting- Adjustable bracket with 4 mounting holes, dia. 11 / 14 mm
Small highly efficient floodlight requiring no external ballast.
Application- Decks and holds, industrial and sport areas
Design- According to rules of maritime classification societies, additional VDE and IEC / EN
Protection Degree- IP 67
|
|
Voltage: 115 or 230 V
Material:
- Casing: brass/red brass
- Bracket: brass
Lamp: Incandescent lamp 100W/approx. 1380lm (not included in delivery)
Equipment:
- Cromium plated copper reflector
- Cable gland internal part: W10
|
|
|
Casing, glass-holding frame, latches and bracket made out of stainless steel, powdercoated (RAL 9018) casing. Hard glass pane, resistant against temperature changes. With branching box. With lampholder R7s. For halogen-lamp up to 500W, length ca.118mm
|
|
|
The portable luminaire is purposed for local illumination during cargo handling, assembling, maintenance works on vessels. Steel body, powder coating; protecting by a wire guard. Cable with plug. IP23, 4x60, 6x60W
|
|
|
Tranberg floodlights are designed to meet rough environmental conditions on ships and offshore installations. It is the policy of Tranberg to provide products with the highest standard in quality and performance
|
|
Housing
Stainless steel deep drawn, seamless
Reflector
Highly polished aluminium, anodized
Finish
Powder coated white RAL 9016 and
enamelled up to 70 - 80 %u03BCm thickness
Pane
Safety glass
Electric
Flexible wiring, silicone insulated, heat
resistant up to 180° C; exterior connec-
tion box with ignition unit
Cable entry
Brass cable gland M 24 x 1.5 MGCG
Lamp base
E 40
Light sources
(Not included) High pressure sodium
lamps (HS) / metal halide lamps (HI)
Mounting
Adjustable bracket with 4 mounting
holes, dia. 11 / 14 mm
Remark
Ballast unit has to be ordered separately
(see type no 1507, page 26 to 27)
Use authorized lamps only
High light output because of high
lamp efficiency.
Application
Decks and holds, industrial and sport
areas
Design
According to rules of maritime classifi-
cation societies, additional VDE and
IEC / EN
Protection Degree
IP 67
|
|
Housing- Stainless steel deep drawn, seamless
Reflector- Highly polished aluminium, anodized
Pane- Safety glass
Electric- Flexible wiring, silicone insulated, heat resistant up to 180° C; exterior connection box
Cable entry- Brass cable gland M 24 x 1.5 MGCG
Lamp base- R 7 s
Light sources- (Not included) Halogen lamp L 114.2 mm, 200 W / 300 W / 500 W
Mounting- Adjustable bracket with 4 mounting holes, dia. 11 / 14 mm
This floodlight is best where there is instant light required. The external junction box enables easy connecting.
Application- Decks and holds, ramps, industrial and sport areas
Design- According to rules of maritime classification societies, additional VDE and IEC / EN
Protection Degree- IP 67
|
|
|
Casing, glass holding frame, latches and brackets made of stainless steel, powder-coated (RAL9018). Hard glas pane, resistant against temperature changes. With build on ignition- and ballast unit 230V, 50Hz. With branching box and lampholder E40
|
|
- Floodlight for decks and holds, industrial and sport areas
- Integrated ballast
- Satisfy rules of maritime classification societies
Specifications:
- Floodlight for High Pressure Sodium (HS) or Metal Halide (HI) lamps with seamless housing of deep drawn stainless steel.
- The housing is powder coated white and enamelled up to 70-80 micrometer thickness. - The floodlight provides extreme corrosion resistance.
|
|
Applications : decks, holds, industrial areas etc.
Approvals : according to the relevant classification societies, additional VDE and IEC
Housing : stainless steel seamless, deep drawn, powder coated white
Diffuser/Shade : safety glass
Mounting : adjustable bracket, stainless steel, 4 mounting holes, Ø 13 mm
Cable Entry : junction box, 1 cable gland brass, M24x1.5 with earthing insert
|
|
Class 1, Division 2, Groups A,B,C,D, T1.
Class 1, Zone 2, Group II, T1.
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
|
|
Housing- Stainless steel deep drawn, seamless
Reflector- Highly polished aluminium, anodized
Pane- Safety glass
Electric- Flexible wiring, silicone insulated, heat resistant up to 180° C, exterior connection box with ignition unit, ballast is incorporated
Cable entry- Brass cable gland M 24 x 1.5 MGCG
Lamp base- E 40
Light sources- (Not included) High pressure sodium lamps (HS) / metal halide lamps (HI)
Mounting- Two adjustable brackets with 2 mounting holes each, dia. 14 mm
Remark- Use authorized lamps only
This is the solution where there is no space left for a separate ballast.
Application- Decks and holds, industrial and sport areas
Design- According to rules of maritime classification societies, additional VDE and IEC / EN
Protection Degree- IP 67
|
|
Voltage: 230 V
Material: Casing, glass-holding frame and bracket made of corrosion resistant cast aluminium
Colour: Black, RAL 9005
Lamp: High Pressure Sodium lamp 400W/approx. 48.000lm (not included in delivery)
Equipment: Built in ignition and ballast unit, max. 240V/50Hz
Variations: Ignition and ballast unit, max. 240V/60Hz
|
|
|
Brass casing, bent tube and fork-shaped holder with copper reflector, inside chromiuim plated hinged, structural hard glass pane, resistant against temperature changes, with lampholder GY 6.35 and bulb 100W/24V
|
|
For use in
* Zone 2
* Zone 21 and Zone 22
Max. possible lamp capacity
* high-pressure sodium lamps up to 600 W
* metal-halide lamps up to 400 W
* halogen lamps up to 1000 W
|
|
Voltage:
- Incandescent lamp AC 115/230V
- High Pressure Mercury Vapour lamp AC 230 V
Material:
- Casing: brass/red brass
- Bracket: cast iron
Lamp:
- Incandescent lamp 300W/approx. 5.000lm
- High Pressure Mercury vapour lamp 250W/approx. 13.500lm
(not included in delivery)
Equipment:
- Cromium plated copper reflector
- Cable gland internal part: W10
Variations: Ballast for 115V, 50Hz resp. 60Hz, IP 56 (housing dimensions may vary)
|
|
|
Casing, glass holding frame, latches and brackets made of stainless steel, powder-coated (RAL9018). Hard glas pane, resistant against temperature changes. With branching box. With lampholder R7s
|
|
|
Casing, glass holding frame, latches and brackets made of stainless steel, powder-coated (RAL9018). Hard glas pane, resistant against temperature changes. Branching box with 2x ignitor 230V, 50/60Hz. With 2 lampholder E40
|
|
- Floodlight for decks and holds, industrial and sport areas
- Vibration compatible type of durable stainless steel
- Satisfy rules of maritime classification societies
|
|
|
|