|
|
|
Casing, glass holding frame, latches and brackets made of stainless steel, powder-coated (RAL9018). Hard glas pane, resistant against temperature changes. Branching box with 2x ignitor 230V, 50/60Hz. With 2 lampholder E40
|
|
- Floodlight for decks and holds, industrial and sport areas
- Vibration compatible type of durable stainless steel
- Satisfy rules of maritime classification societies
|
|
- Floodlight for decks and holds, industrial and sport areas, illumination of water surfaces, fishing-nets, etc
- Extremely powerful and highly efficient narrow beam floodlight
- Satisfy rules of maritime classification societies
|
|
Floodlight for halogen lamps, max 1x1000W
Applications : decks, holds, industrial areas, etc.
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : stainless steel seamless, deep drawn, powder coated white
Diffuser/Shade : safety glass
Mounting : adjustable bracket, stainless steel, 4 mounting holes, 2x Ø 10 mm and 2x Ø 14 mm
|
|
Easy to change safety glass lens.
No tools required for relamping.
Terminal block for incoming wiring.
Corrosion resistant stainless steel deep drawn seamless housing.
Epoxy powder coated finish.
Highly polished aluminum wide or narrow beam reflector.
Stainless steel hardware.
|
|
* For use in
o Zone 1 and Zone 2
o Zone 21 and Zone 22
* Lamp options
o halogen lamps (QT) up to 1000 W
o halogen metal halide lamps (HIT) up to 400 W
o sodium vapour high pressure lamps (HST) up to 600 W
* Housing in cast aluminium
* Mounting components in hot galvanized steel
* The floodlight can be adjusted in 15° or 30° increments
|
|
Halogen Floodlight , maximum 1000W
Tranberg floodlights are designed to meet rough environmental conditions on ships and offshore installations. It is the policy of Tranberg to provide products with the highest standard in quality and performance
|
|
Housing- Stainless steel deep drawn, seamless
Reflector- Highly polished aluminium, anodized
Pane- Safety glass
Electric- Flexible wiring, silicone insulated, heat resistant up to 180° C; exterior connection box
Cable entry- Brass cable gland M 24 x 1.5 MGCG
Lamp base- E 40
Light sources- (Not included) Halogen lamp 500 W / 1 000 W
Mounting- Adjustable bracket with 4 mounting holes, dia. 11 / 14 mm
Remark- For 1 000 W use only lamps of following manufacturers: BLV, Phillips, General
Electric- Vibration compatible type of durable stainless steel.
Application- Decks and holds, industrial and sport areas
Design- According to rules of maritime classification societies, additional VDE and IEC / EN
Protection Degree- IP 67
|
|
Housing- Stainless steel deep drawn, seamless
Reflector- Highly polished aluminium, anodized
Pane- Safety glass
Electric- Flexible wiring, silicone insulated, heat resistant up to 180° C; two exterior connection boxes with one ignition unit
Cable entry- 2 brass cable glands M 24 x 1.5 MGCG
Lamp base- E 40
Light sources- (Not included) High pressure sodium lamps (HS) / metal halide lamps (HI)
Mounting- 2 adjustable brackets with 2 mounting holes each, dia. 14 mm
Remark- Ballast unit has to be ordered separately (see type no 1507, page 26 to 27) Use authorized lamps only
One housing, double lighting output.
Application- Decks and holds, industrial and sport areas
Design- According to rules of maritime classification societies, additional VDE and IEC / EN
Protection Degree- IP 67
|
|
Voltage: 115 or 230 V
Material:
- Casing: brass/red brass
- Bracket: stainless steel
Lamp:
- Halogen incandescent lamps 1000W/approx. 22.000lm (not included in delivery)
- Other lamp wattages upon request
Equipment:
- Heat insulating branching box
- Cable gland internal part: W10
|
|
Voltage: AC 230 V
Material:
- Casing: brass/red brass
- Bracket: cast iron
Lamp: High Pressure Mercury vapour lamp
- 400W/approx. 40.000lm
- 1000W/approx. 55.000lm
(not included in delivery)
Equipment:
- Cromium plated copper reflector
- Branching box
- Vibration-proof lampholder E40
- Cable gland internal part: W12
|
|
* Floodlight lights for helideck landing area
* For use in hazardous areas
* Rugged and low profile floodlight in acid resistant stainless steel housing (SS316L)
* Simple to install and maintain
* IP rating
* Resistant to vibrations
* Long lamp life
|
|
For use in Safe area
Tranberg luminaires are all designed for use in rough environments. The helideck light system delivered by Tranberg is designed to meet the toughest conditions in the helicopter landing areas. The floodlights are designed to provide adequate illumination of the whole area without glare to pilots or helicopter personnel in the area. Helideck equipment manufactured by Tranberg is delivered to offshore installations, oil tankers and supply ships, hotels and hospitals all over the world.
|
|
EEx de IIB T5 Ex II 2 G
For use in Zone : Zone 1, Zone 2
Tranberg luminaires are all designed for use in rough environments.
The helideck light system delivered by Tranberg is designed to meet
the toughest conditions in the helicopter landing areas. The floodlights
are designed to provide adequate illumination of the whole area without
glare to pilots or helicopter personnel in the area. Helideck equipment
manufactured by Tranberg is delivered to offshore installations, oil
tankers and supply ships, hotels and hospitals all over the world.
|
|
- Sign and escape route lighting in one unit
- Easy mounting
- Easy maintenance
Specifications:
- Sign and route lighting luminaire with body and sign plate of polycarbonate.
- Supplied with 3 different signs. May also be used for route lighting 85 lm standard; also available for route lighting 120 lm (HO). Integrated battery backup for 1 and 3 hours lighting time. LED indicator for charging function.
|
|
Applications : outdoor sign, use watertight luminaire for lighting
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : stainless steel, powder coated white
Sign : PMMA, list of standard pictograms are available, other pictograms on customers requirements
Mounting : 2 mounting holes, Ø 8.3 mm
|
|
- Allround signalling light in different colours for general warning purposes
- Seawater resistant
|
|
Main body of corrosion resistant (seawater) light alloy. Yellow polyurethane paint.
Globe of impact resistant polyamide available in colours red, blue, amber, clear or green.
Approved according to CENELEC EN50014, 50018.
|
|
Luminaire Emergency
Tranberg luminaires are all designed for use in rough environments. It is the policy of Tranberg to provide products and services that meet the highest standards of quality in the industry and the performance needs and expectations of our customers. the design of Tranberg luminaires is based on many years of experience and extensive research in the field of professional Marine lighting. Carefully selected materials are used to ensure maximum performance, low maintenance and a long trouble free life.
|
|
- Glarefree illumination and marking of helidecks
- Helideck Zone 1 EEx e luminaire
Specifications:
- Helideck luminaire with yellow marking light diffuser. Housing of sea water resistant aluminium. Stove enamelled white epoxy/polyester powder finish.
- Available with integral emergency unit (Ta=25°C).
|
|
Features:
- Rugged Shutter producing Daylight Communications Speeds up to 180 dots and/or dashes per minute
- Marine Grade Aluminum and Stainless or Brass Option
- Silvered Glass Reflector or Polished Aluminum Option
- 360 Degree Horizontal Movement
- Universal Mounting Bracket provides Bulkhead and Stanchion (pole) mounting
- 500 to 1000 Watt Lamp Selections
- Standard Navigation Use: Options can be ordered with Local handle and Remote Pilothouse Lever Control which provide Navigational use in addition to Signalling Capacity
- U. S. Coast Guard and U. S. Navy-Approved, with assigned National Stock Numbers
|
|
Material: Casing: plastic
Colour: Black
Lamp: Halogen lamp
Parabolic mirror / reflector: Glass, Ø 150 mm
Light colour: Constant
Average lamp life: 4,000 h
Equipment:
- Sighting device
- Toughened front glass
- Rubber sealing
- Quick fastening rubber
- Micro switch for left- and right hander
- Halogen lamp
- Connection cable =5m
- WISKA's devices are built at least up to requirements of ABS, BV, DNV, GL, LR, PRS
|
|
Engine room, hold, laundry, store weather deck, outside passage way
|
|
|
Fluorescent light fitting 2x36W with polycarbonate branching box (2xPG13,5 cable gland). Housing and structured diffuser made out of polycarbonate, reflector white painted steel. Clips made out of stainless steel. Single ended through wiring, 1 x cable gland PG13,5. Optional 3 cable glands PG13,5 or M20 can be installed (perforate drill-holes). Fitting with ballast unit 230V, 60Hz, compensated (other voltage and frequency upon request). Lampholder for standard 2-pin fluorescent lamps. Mounting through 2 stailess steel bolts M8. Housing in colour RAL 7035. Fitting ready for use, lamps included. Setting to work is possible without opening the fitting.
|
|
|
The luminaire is purposed for illumination of open spaces. Polycarbonate body and diffuser. It is foreseen to be installed on open decks on vessels as well as in places exposed to action of sea waves. IP66/IP67, 1x18W
|
|
- Allround luminaire for industrial areas and marine installation
Specifications:
- Luminaire for decks, engine and technical rooms, as well as industrial areas.
- Housing of galvanized steel (G) or stainless steel(S).
- Galvanized steel housing is not suitable for marine outdoor installation. Stove enamelled white polyester powder finish.
- The geartray is possible to hanng on internal brackets when connecting cables and executing maintenance.
- Cover of clear impact-resistant polycarbonate (PC). Cover clips in stainless steel.
|
|
Applications : multipurpose luminaire for engine rooms, stores, etc.
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : zinc coated steel, seamless deep drawn, powder coated white
Diffuser/Shade : polycarbonate, clear
Mounting : 2 mounting holes,Ø 9 mm
|
|
Watertight multipurpose luminaire, surface
Flatter, smaller, shorter and smoother than comparable ones.
Application: Workshops, engine rooms, stores, holds, passage ways, galleys, etc.
Design: According to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 55 or IP 67
Housing: Zinc coated steel sheet deep drawn, seamless
Gear tray: Zinc coated steel sheet
|
|
|
|
|
|
|
Watertight multipurpose luminaire, sur-
face
Flatter, smaller, shorter and smoother than
comparable ones.
Application: Workshops, engine rooms, stores,
holds, passage ways, galleys, etc.
Design: According to rules of maritime classifica-
tion societies, additional VDE and IEC / EN
Protection degree: IP 55 or IP 67
Housing: Zinc coated steel sheet deep drawn,
seamless
Gear tray: Zinc coated steel sheet
Finish: Powder coated white RAL 9016 and
enamelled up to 70 - 80 %u03BCm thickness
Diffuser: Clear polycarbonate, others on request,
turn buttons for quick mounting
Electric: Flexible wiring, heat resistant up to 105° C;
easy clip-in-system for removable gear tray with
plug-in connector to the housing
Cable entry: To be ordered separately; e.g. PG 16,
M 24 x 1.5 MGG / MGCG. When you place your
order, please use symbols like O- / O= / -O- / -O= /
=O= for location
Lamp base: G 13
Light sources (not included): T 26 / T 38
fluorescent lamp 18 / 20 W, 36 / 40 W
Mounting: 2 mounting holes, dia. 10 mm
Remark: Variations on request. Short-dated delivery
of luminaires with standard variations
|
|
|
|
Deck floodlights, Deck lighting for ships
