|
|
Accommodation area, indoor
|
|
Application : cabins
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : phosphate coated steel, powder coated white
Diffuser : polycarbonate, opal
Mounting : 4 mounting holes, 3.7 x 6.5 mm, cut out: 187 x 68 mm
|
|
Ideal for berth or mirror lighting.
Opal acrylic diffuser.
Terminal block for incoming wiring.
Multiple knockouts for cable entries.
Direct mounting to bulkhead or deckhead.
Corrosion resistant aluzinc housing.
Epoxy powder coated finish.
|
|
Berth light
Particularly flat and solid for hinged bunks. Only 34 mm thick, resistant material, just ideal for the berth.
Application: Accommodation areas, lounges
Design: According to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 30
Housing: Aluminium brushed, anodized brown, end caps polycarbonate brown / zinc coated steel sheet, powder coated white, end caps whitel
|
|
Ideal for berth or desk lighting.
Polycarbonate housing.
Adjustable matt stainless steel reflector.
Terminal block for incoming wiring.
Integral on-off switch.
Direct mounting to bulkhead.
40W incandescent or 7W compact fluorescent.
|
|
Berth light with adjustable reflector
For long time the best lamp for bunks because the beam arrives where it ought to thanks to the reflector being turnable by almost 360°.
Application: Accommodation areas
Design: According to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 20
Housing: Polycarbonate darkbrown, reflector mat,
stainless steel, deep drawn, interior enamelled
white RAL 9016
Electric: Flexible wiring, silicone insulated, heat
resistant up to 180° C, 1 - way d.p. switch;
connector between wall plate and light
Cable entry: Opening on rear side, dia. 12 x 30 mm
Lamp base: E 14 / B 15 / E 27 or B 22
Light sources (not included): Incandescent all pur-
pose lamp 40W (type 1355) / incandescent tubular
lamp 40 W (type 1354)
Mounting: 2 / 4 mounting holes, dia. 5 mm
|
|
Material: - Housing: plastic
- Reflctor: stainless steel
Lamp: Incandescent lamp up to 40W (not included in delivery)
Equipment: 2-pole tumbler switch
|
|
Autronica Fire and Security AS has an extensive range of emergency light systems and luminaires intended for small and plain systems to large and complex installations.
Our entire range includes systems and luminaires for many different applications and locations, including different buildings onshore, maritime and offshore applications, weatherproof and vandal resistant applications and many other applications. Our entire range includes systems and luminaires for many different applications and locations, including different buildings onshore, maritime and offshore applications, water proof and vandal resistant applications and many other applications
|
|
Applications : emergency light, illuminated sign for passage ways, public areas, etc.
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : zinc coated steel, powder coated white
Sign : PMMA, list of standard pictograms are available, other pictograms on customers requirements
Mounting : 4 mounting holes,Ø 4.5 mmcut out 243 x 60 mm
|
|
Polycarbonate sign.
Corrosion resistant aluzinc or stainless steel housing.
Epoxy powder coated finish.
Terminal block for incoming wiring.
Sign with 2” high red letters as per USCG requirements.
Single or double sided.
Recessed mounted.
8W fluorescent.
Custom signs available.
|
|
Emergency luminaires
Our specially designed ship emergency and exit luminaires provide a reliable and economical solution, without compromising on the style and compatibility of the products. We have advantaged our 30 years of expertise in the manufacture of highly demanding rolling stock and bus lighting solutions to meet the special requirements of shipboard applications.
|
|
Low location lighting
Based on the surface-emitting Optiline fibre optic lighting system, our LLL system allows for stylish and reliable Low Location Lighting. The basic system consists of an aluminium profile with fibre optic light modules mounted to it. High-efficiency and long-lasting LEDS are used as the light source. Installation of the Teknoware LLL system is easy, thanks to its modular construction and ready to fit, waterproof connectors. Aluminium profiles are available in both floor and wall-mountable models. The system is complemented by EXIT signs and end pieces.
The module operating voltage is a safe 6 V DC, and the system power consumption is a very low 20 mA/metre. A waterproof encased 230 V AC/6 V DC power source and battery backup unit are also available for the system.
|
|
Application
Engine room, refrigerated hold
Protection degree IP56
Hanging ring
|
|
Rugged and low profile luminaire
Tranbergs luminaires are all designed for use in rough environments.
It is the policy of Tranberg to provide products and services that meet the highest standards of quality in the industry and the performance needs and expectations of our customers. The design of Tranberg luminaires is based on many years of experience and extensiveresearch in the field of professional Marine lighting. Carefully selected materials are used to ensure maximum performance, low
maintenance and a long trouble free life.
|
|
|
Tranbergs luminaires are all designed for use in rough environments. It is the policy of Tranberg to provide products and services that meet the highest standards of quality in the industry and the performance needs and expectations of our customers. The design of Tranberg luminaires is based on many years of experience and extensive research in the field of professional Marine lighting. Carefully selected materials are used to ensure maximum performance, low maintenance and a long trouble free life.
|
|
Series C-LUX 6108 and 6508 compact emergency lighting fitting can be used for safety illumination, but also as information or emergency exit sign lights.
Zones 1 & 2, 21 & 22
|
|
Engine room, hold, laundry, store
Chemical processing and industrial areas
|
|
|
Fluorescent light fitting 2x36W. Housing and structured diffuser made out of polycarbonate, reflector white painted steel. Clips made out of stainless steel. Single ended through wiring, 1 x cable gland PG13,5. Optional 3 cable glands PG13,5 or M20 can be installed (perforate drill-holes). Fitting with ballast unit 230V, 50Hz, compensated (other voltage and frequency upon request). Lampholder for standard 2-pin fluorescent lamps. Mounting through 2 stailess steel bolts M8. Housing in colour RAL 7035. Fitting can also be used with exit signs (adhesive).
|
|
The luminaire is purposed for evacuational illumination of accommodation on vessels. Ceiling mounting, recessed.
IP20, IP22, 1x8W, 1h, 3h
|
|
|
The luminaire is purposed for illumination of accommodation, corridors etc. on vessels. Steel body, powder coating; polycarbonate diffuser. Wall or ceiling mounting. IP30, 2x18W
|
|
- Batten luminaire
- Continuous mounting
Specifications:
- Batten luminaire with main body of epoxy polyester powder coated electrogalvanised steel.
- End caps of plastic.
|
|
Application : passage ways, cabins, lounges, dining rooms, accommodation areas
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : phosphate coated steel, powder coated white
Diffuser : polycarbonate opal
Mounting : 4 mounting holes, Ø 5.5 mm cut out 250 x 250 mm
|
|
Variety of diffusers available for every application.
Terminal block at each end for incoming wiring.
Feed through wiring up to 23A, eliminating the need for field junction boxes.
Multiple knockouts for cable entries.
Adjustable mounting brackets for easy installation in marine ceiling systems.
Ceiling matching profiles included.
Corrosion resistant aluzinc housing.
Epoxy powder coated finish.
Spring loaded lampholders that are resistant to shock and vibration.
|
|
Clear prismatic acrylic diffuser.
Terminal block at each end for incoming wiring.
Feed through wiring up to 23A, eliminating the need for field junction boxes.
Multiple knockouts for cable entries.
Adjustable mounting brackets for easy installation in marine ceiling systems.
Corrosion resistant aluzinc housing.
Epoxy powder coated finish.
Spring loaded lampholders that are resistant to shock and vibration.
|
|
Ceiling luminaire, recessed and surface
The solution for extremely narrow ceiling areas and for little rooms.
Application: Accommodation areas, lounges
Design: According to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 30
Housing: Zinc coated steel sheet
Diffuser: Opal polycarbonate
Electric: Flexible wiring, heat resistant up to 105° C
Cable entry: 4 inlets for max. cable dia. 11 mm
Lamp base: G 23
Light sources (not included): TC tubular compact fluorescent lamp 9 W
Mounting: 4 mounting holes, dia. 5 mm
|
|
|
The fitting is purposed for illumination of accommodation where there is low temperature, e.g. cold stores. The body is made of phosphate coated steel and painted with white powder coating. Wall or ceiling surface mounting. IP66, 2x18W, -30°C
|
|
Applications : coldrooms, refrigerated areas, freezing rooms
Approvals : according to the rules of relevant classification societies, additional VDE and IEC
Housing : zinc coated steel, powder coated white
Diffuser/Shade : polycarbonate, clear
Mounting : 2 mounting holes, Ø 9 mm
|
|
Coldroom luminaire, surface
The easily and rapidly cleanable luminaire for low temperature application.
Application: Refrigerated areas, coldrooms, freezing rooms; ambient temperature min. -40° C, max. +10° C; optimum light output at -10° C to -20° C
Design: According to the regulations USPH (U. S. Public Health) and according to rules of maritime classification societies, additional VDE and IEC / EN
Protection degree: IP 67
Ground plate: Stainless steel
Gear tray: Zinc coated steel sheet
Diffuser: Clear polycarbonate
Electric: Flexible wiring, heat resistant up to 105° C; removable gear tray with plug-in connector to the housing
|
|
|
Ex-protected fluorescent light fitting with 2 channel electronic ballast unit for bi-pin fluorescent lamps (G13) 2x18W. Housing made of glass mat reinforced polyester, protective cover made of polycarbonate. Double-sided lock with 10 latch points. Protective cover hingeable on both sides. Automatic switch built as a safety disconnector acc. to EN 60947.Automatic switch ensuring the disconnection of all exposed components when the fitting is opened . Large terminal compartment with 6 terminals up to 6 mm². Rated voltage: AC 110V-254V +/- 10%, 47-63Hz, DC 110V-230V /- 10%. Rated current: 0,18A; Cos phi: 0,95 (230V). 2x plastic cable gland M25. Permissable ambient temperature -25°C to 50°C. Insulation class I, single ended through-wiring.
|
|
|
Explosion-proof light up to 200W, with security switching arrangement. PTB-No. PTB 03 ATEX 1111,Ex-protection class: EEx de IIC T3+T4 Pressure resistant enclosure Red cast brass casing and glass ring Brass wire-guard With lampholder E 27 or B 22 Temperature class: hanging installation T4 - bulb up to 150W - metal alloy bulb up to 160W* - mercury vapour 80W* T3 - bulb up to 200W - mercury vapour 125W* - fluorescent bulb E 27 25W* T5 - DULUX EL 23 *Ignition and ballast unit required
|
|
|
|