|
|
The MINI-VERTICUS III unit combines leading-edge compressor technology with top quality "Made in Germany".
The sound-proofed MINI-VERTICUS III is the ideal partner for diving centers and diving shops, who count on reliable and long-life use coupled with low operating expenses.
Rapid spare parts supply and service guarantee a sucessful diving season - globally.
The patented P41® purification system guarantees purest breathing air quality acc. to DIN EN 12021.
The BAUER Compressors Group has sixty years of experience in the manufacture of high pressure compressors. Be assured: our compressor will be your dependable source of clean breathing air for many years, even decades.
|
|
In September 2000 a completely new modular unit system was realized for the big stationary BAUER compressors. In the past the customer had to decide between KAP-range (open) and the VERTICUS 5 (silenced version), whereas nowadays he may start with the open compressor type KAP 5 in the proven vertical design and tailor his own unit with SPC-compressor control B-CONTROL , P Filter System and integrated filling panel acc. to the modular system. At a later point of time the unit can be upgrated to a silenced unit VERTICUS 5 type. Subsequently larger and additional filter housings, refrigeration dryer AIR-KOOL, external filling panels as well as storage cylinders can be easily fitted.
The MINI-VERTICUS II is based on the successful previous model. However, all models are now equipped with the extremely robust new compressor blocks, which form the heart of the system.
|
|
When the last thing you want to worry about is the operational readiness of your breathing air system, look to BAUER for the best. Whether you are trying to design a compressor system to fit your station’s needs or looking for ideas for your new cascade truck, look to Bauer Compressors for your next system. Our containment fill stations are proof tested by an independent third party agency.
|
|
The mobile POSEIDON compressors are backed by the renowned POSEIDON quality and safety and are manufactured from tried and tested reliable and durable components. These breathing air compressors are economical, absolutely reliable and are excellent performers.
|
|
Safe NITROX from Professionals
When dealing with NITROX safety is undoubtedly the uppermost requirement! To make sure dealing with NITROX is as safe and easy as possible, BAUER delivers a complete ready-to-use membrane system to produce NITROX.
|
|
|
Tank, 15l / 3300 PSI (230 bars) giving the capacity of a twin tank. This tank is equiped with the new dual outlet valve (Din or INT) without reserve and a carrying handle.
|
|
|
|
|
|
|
The Cressi tanks are made by Faber, the leading European manufacturer of scuba diving tanks, with extremely top quality standards.
They come in 5 different capacities: 5, 10, 12, 15 and 18 litres.
On the other hand, the valves are made by Cressi-sub and were the first easy to assemble and disassemble valves to appear on the market.
They are strong and reliable and are made from really top quality materials.
The inner air passages were carefully studied in the design so as to guarantee top performance even, and above all, with the top performance regulators.
The valve design ensures an excellent grip, facilitating opening and closing of the tank.
A brand new, exclusive slot system means you can check whether the faucet is open or closed at a glance (yellow = faucet closed, red = faucet open).
The regulator connection incorporates a threaded insert, which means it can equally be used for both INT bracket or DIN connection.
Because the valves are modular you can easily change from a single connection valve to dual connection valve and vice versa.
The Cressi-sub valves passed the strict tests imposed by European standards with flying colours thus receiving the prestigious CE certification
|
|
Steel alloy with molybdenum chrome 34CRM04. Sheet metal fabrication cycle.
Valves; Single and twin valve type in chrome-plated matt finish brass, with DIN-INT connector and thread M 25x2.
Outer treatment: shot-blasted with selected grit, 1 protective zinc layer, 90 micron thick, 5 layers of double-component epoxy primer, 3 layers of polyurethane finishing painting with “wet on wet” system, black-white sectors complying with EC regulations.
|
|
|
For 50 years now divers around the world have counted on Sherwood equipment for dependable performance in all conditions, and this trust is something we'll keep earning, dive after dive, for the next 50 years and beyond. Today, the Sherwood brand has expanded into a full line of dive equipment and products, each continuing the long tradition of utter simplicity and absolute reliability.
|
|
Valve CE approved.
TECHNISUB cylinders are made from high quality chromium molybdenum steel, with outside and inside protective coating. External protection against corrosion is obtained by hot zinc-painting depositing a layer of molten zinc on the bottles and applying polymer paint. Each cylinder is supplied with high resistance protective nylon mesh. Single 12.5, 15, 18 litres cylinders are equipped with two outlet valves, the second of which swivels. Both outlets can easily be transformed from Int to DIN connection. Handwheels have spare o-ring inside.
High visibility colours.
|
|
Try this on for size. The miniature Pony Bottle Gauge is a fully functional submersible pressure gauge rated to 5,000 psi. Ideal for back-up air supplies or decompression tanks, the Pony Bottle Gauge is the perfect accessory for use with wireless PDC's, allowing you to quickly pressure check your cylinder without linking your receiver unit.
Threads directly into any standard first stage high pressure port
Nitrox compatible to 100% O2
Large numbers and green, yellow and read indicators for easy monitoring
One-way safety valve
Readings to 5,000 psi
|
|
|
The mobile POSEIDON compressors are backed by the renowned POSEIDON quality and safety and are manufactured from tried and tested reliable and durable components. These breathing air compressors are compact, transportable and are excellent performers.
|
|
BAUER has long been known as the performance proven leader for high pressure breathing air in the scuba market. From small portable compressors to a stationary compressor system for your dive shop, we have a compressor system that will fit your needs. We manufacture our own air purification systems that meet the Compressed Gas Association (CGA) standards for grade "E" air.
|
|
|
The the units of the PROFI LINE II - CAPITANO 140, MARINER 200, MARINER 250 and MARINER 320 - are designed for diving schools, for professional divers and those who operate professional filling stations, who rely apart of the high toughness of BAUER compressors, above all, on economic efficiency, extremely tough continuous operation and expansibility. After all, the diver wants to rely on his compressor during the whole season.
|
|
|
The units of the COMPACT LINE - the JUNIOR II and the OCEANUS - perfectly suit private divers, small diving clubs and diving boats, because of their light weight, their compact design and their cost effectiveness without having to lower one's sights refering to the typical high toughness of BAUER KOMPRESSOREN.
|
|
| ... products without information |
| |
|
|
Diving tanks, Dive compressors...
